JL Audio 98227 - User Manual
JL Audio 98227 Amplifier – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 9 – Amplifier Topology:
- Page 10 – the nine-step Procedure; (follow this procedure for each pair of channels); not recommended; detent Panel actual; JL Audio amplifiers utilizing the Regulated; necessary equipment
- Page 11 – contact with the input jacks on the amplifier.
- Page 13 – if you need service on your Jl audio product:; (do not send product for repair to this address); international warranties:; by that country’s distributor and not by JL Audio, Inc.
owner’s manual
4-Channel Class-D Full-Range Marine Amplifier
Thank you for purchasing a JL Audio amplifier for
your marine sound system.
Your amplifier has been designed and manufactured to exacting
standards in order to ensure years of musical enjoyment in your vessel.
For maximum performance, we highly recommend that you have
your new amplifier installed by an authorized JL Audio dealer. Your
authorized dealer has the training, expertise and installation equipment
to ensure optimum performance from this product. Should you
decide to install the amplifier yourself, please take the time
to read this manual thoroughly so as to familiarize yourself
with its installation requirements and setup procedures.
If you have any questions regarding the instructions in this
manual or any aspect of your amplifier’s operation, please contact your
authorized JL Audio dealer for assistance. If you need further assistance,
please call the JL Audio Technical Support Department
at (954) 443-1100 during business hours.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
16 | JL Audio - MHD600/4 Owner’s Manual 17 “status” led / ProteCtion CirCuitrY There is a single multi-color LED on the control panel of the amplifier to indicate the amplifier’s operating status. This LED’s behavior is as follows: 1) Flashing Green: amplifier is powering up, audio output is muted. ...
18 | JL Audio - MHD600/4 Owner’s Manual 19 the nine-step Procedure (follow this procedure for each pair of channels) 1) Disconnect the Speaker Connector Plugs. 2) Turn off all processing on the source unit (bass/treble, loudness, EQ, etc.). Set fader control to center position and subwoofer level co...
20 | JL Audio - MHD600/4 Owner’s Manual 21 “my amplifier shuts off once in a while, usually at higher volumes” Check your voltage source and grounding point. The power supply of the MHD600/4 will operate with charging system voltages down to 10V. Shutdown problems at higher volume levels can occur w...
