Jet 505211 - User Manual - manualsarea.com

Page 2 - IMPORTANT SAFETY INSTRUCTIONS; General air tool warnings

2 JAT-211 Impact Wrench IMPORTANT SAFETY INSTRUCTIONS General air tool warnings 1. Read and understand this entire manual before attempting assembly or operation. 2. Read and understand all warnings posted on the tool and in this manual. Failure to comply with all of these warnings may cause ser...

Page 3 - Specific warnings for Impact Wrench

JET 3 24. Keep visitors a safe distance from the work area. Keep children away. 25. Give your work undivided attention. Looking around, carrying on a conversation and “horse-play” are careless acts that can result in serious injury. 26. Do not force a tool or attachment to do a job for which it wa...

Page 4 - About this manual

4 JAT-211 Impact Wrench About this manual This manual is provided by JET, covering the safe operation and maintenance procedures for a JET Model JAT-211 Pneumatic Impact Wrench. This manual contains instructions on safety precautions, general operating procedures, maintenance procedures and part...

Page 5 - Tool specifications

JET 5 Tool specifications Model JAT-211, D-Handle Impact Wrench Stock number 505211 Square drive 1 in. Bolt capacity 1-7/16 in. Anvil retainer type Hog ring + pin hole Impact mechanism Twin hammer Maximum torque 2200 lbf•ft (2982.8 N•m) Working torque 380~1900 lbf•ft (515~2576 N•m) Free speed 5500...

Page 7 - Maintenance

JET 7 Maintenance Lubrication The impact wrench should be lubricated daily (or before each use) with air tool oil through the air inlet. During continual operation, it should be re-oiled every 1 to 2 hours. This can be done with an in-line oiler, or manually. If done manually, proceed as follows: ...

Page 8 - Lubrication

8 JAT-211 Impact Wrench When using multiple hoses, air hoses should be larger than leader hose. Join multiple hoses directly, rather than with quick connect fittings which may cause pressure drops and tool power reduction. Use anti-whip devices across hose couplings to prevent hose from whipping...

Page 9 - Troubleshooting JAT-211 Impact Wrench

JET 9 Troubleshooting JAT-211 Impact Wrench Any disassembly of the tool should be done by qualified service personnel. For problems not addressed below, contact JET technical service at 800-274-6846. Problem Possible cause Remedy Tool will not start. Air valve closed or obstructed. Open valve; cle...

Page 11 - Replacement parts

JET 11 Replacement parts Service parts are listed on the following pages. To order parts or reach our service department, call 1-800-274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Please have the stock number and serial number of your tool available when you call, so that we may serve...

Page 14 - Warranty and Service

14 JAT-211 Impact Wrench Warranty and Service JET warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty l...

Jet 505211 - User Manual

Table of Contents:

Summary

Other Jet Impact Wrenches Models