Page 3 - CONTENTS
iii VM9314 CONTENTS Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9314 Mobile Multimedia Receiver for maximum...
Page 5 - FEATURES; DVD; Tuner
1 VM9314 FEATURES Congratulations on your purchase of the Jensen VM9314 Mobile Multimedia Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9314 installed by a reputable installation shop. DVD • Aspect Ratio - Full and Nor...
Page 7 - OPTIONAL EQUIPMENT; Satellite Radio Tuner; See “XM® Radio Operation” on page 53.; Bluetooth Phone; See “Bluetooth Operation” on page 62.; Rear Camera
3 VM9314 OPTIONAL EQUIPMENT • NAV102 The VM9314 is "navigation ready." Before accessing any navigation features, you must purchase and install the navigation module (NAV102). All installation and operating instructions will be included with the navigation module.Once the navigation module is...
Page 8 - WARNINGS; WARNING! Never disassemble or adjust the unit.
4 VM9314 WARNINGS WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions. WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle. This is a viol...
Page 9 - Entering the Default Password; The default user password is; Press the
5 VM9314 ANTI-THEFT FEATURE The VM9314 is equipped with an anti-theft feature requiring the user to enter a password upon initial power on. Entering the Default Password The default user password is 012345 (6 digits). Enter the password using the on-screen keypad and then press the arrow (enter) but...
Page 10 - Changing the Password; Touch the; Touch the “Password” field to open the on-screen keypad.
6 VM9314 Changing the Password To change the SECURITY password using the touch screen, perform the following steps: 1. Touch the button to view the “SETUP” menu. 2. Touch SECURITY to view the “SECURITY” sub-menu. 3. Enter the current password (default is 012345) and touch the arrow (enter) key. 4. T...
Page 11 - CONTROLS AND INDICATORS; Press and hold
7 VM9314 CONTROLS AND INDICATORS 1. Rotary Encoder Rotate to adjust the volume. While in the audio menu, press and release to enter and/or confirm audio settings. Press to activate the MUTE function and silence the receiver. Press again to resume sound. 2. SRC Press to turn the unit on. Press and ho...
Page 12 - BAND; press and hold
8 VM9314 13. WIDE/ |<< Press to adjust the display aspect of the picture to one of two settings: Full, Normal or STANDBY. With the monitor closed, press to seek backward. When the NAV102 is connected to the VM9314, press and hold to display the navigation user interface. The TFT screen must be...
Page 13 - REMOTE CONTROL
9 VM9314 REMOTE CONTROL VM9314 DISP 7 10 8 16 2 1 4 6 9 3 12 13 15 14 CLOSE PIC WIDE TILT 5 11 EJECT MUTE PTT A / V INPUT
Page 15 - USING THE TFT MONITOR; Open/Close TFT Monitor; Open TFT Monitor; Close TFT Monitor; OPEN; TFT Monitor Auto Open; OPEN; Monitor Tilt Angle Adjustment; Step by Step Angle Adjustment; TILT; Continuous Angle Adjustment
11 VM9314 USING THE TFT MONITOR Open/Close TFT Monitor Open TFT Monitor Press the OPEN button (15) on the front panel or press the ( ) button (25) on the remote control to activate the mechanism that moves the display panel into the viewing position. Close TFT Monitor Press the OPEN button (15) on t...
Page 16 - Aspect Ratio; DISP; monitor to adjust the aspect ratio as follows:; Parking Brake Inhibit; Table 1: Monitor Protective Measures
12 VM9314 Aspect Ratio Press the DISP button (10) on the remote control or WIDE button (13) on the monitor to adjust the aspect ratio as follows: Parking Brake Inhibit When the pink "Parking" wire is connected to the vehicle Parking Brake circuit, the front TFT monitor will display video whe...
Page 18 - OPERATING INSTRUCTIONS; Remote Control Functions; Table 2: Common Remote Control Functions
14 VM9314 OPERATING INSTRUCTIONS Power On / Off Press the /SRC button (2) on the unit (or the button (4) on the remote control) to turn the unit on. The buttons on the front of the unit light up and the current mode status appears in the LCD (11). You can also turn on the unit by pressing the OPEN b...
Page 19 - Press the rotary encoder button (1) on the front panel or the; MUTE; Playing Source Selection; When the monitor is closed, press the; Source Menu; SRC; HD; XM; SOURCE
15 VM9314 Mute/Line Mute Press the rotary encoder button (1) on the front panel or the MUTE button (3) on the remote to mute the volume from the unit. Press the rotary encoder button again to restore the volume. “MUTE” is displayed on the LCD. Adjusting the volume or using any of the audio setup fea...
Page 20 - External Devices; Volume Adjustment; Volume Increase/Decrease
16 VM9314 NOTE: You can press and hold to drag the “Source Menu” icons and rearrange them based on your preference External Devices External peripheral devices, including a game console, camcorder, navigation unit, iPod, Zune, etc. can be connected to this unit via RCA output using the A/V Media Ada...
Page 21 - Audio Control Menu; control to display the audio menu.
17 VM9314 Programmable Turn-On Volume This feature allows the user to select a turn-on volume setting regardless of the volume setting prior to turning the unit off. To use this feature, the TFT monitor must be displayed. To program a specific turn-on volume level, turn the rotary encoder (1) to adj...
Page 22 - Use the touch screen to adjust the settings for an audio feature.; System Reset; Table 3: Audio Adjustments; Audio Function
18 VM9314 • Use the touch screen to adjust the settings for an audio feature. The Audio menu will automatically exit after a few seconds of inactivity. To exit quickly, touch the top left corner of the screen. System Reset To correct a system halt or other illegal operation, use the tip of a pen to ...
Page 23 - iPod VOICE CONTROL; Acceptable Commands
19 VM9314 iPod VOICE CONTROL You can navigate your iPod/iPhone music library and change the source/mode using the latest in voice recognition technology, allowing you to enjoy a more handsfree experience so you can focus on driving. The VM9314 is provided with a high quality active microphone for vo...
Page 24 - Basic Voice Operation; PTT; Using Natural Speech to Access your iPod/iPhone Music Library
20 VM9314 Basic Voice Operation 1. To activate the voice control function, touch the PTT button on screen or on the remote control (7). The PTT button is located on the left side of most screens, but is not present on all screens. 2. The system displays the voice icon along with the text “Please say...
Page 25 - SETUP MENU; To access system settings, touch the; Accessing Menu Items; Use the touchscreen to select the feature to be adjusted.; Jan
21 VM9314 SETUP MENU To access system settings, touch the button on the screen to enter the setup menu. The “TIME” sub-menu appears highlighted in yellow. Accessing Menu Items Touch to select a sub-menu (Screen, Theme, SWC, etc.). The features available for adjustment under the highlighted sub-menu ...
Page 27 - Setting
23 VM9314 SWC (Steering Wheel Control) Sub-menu Features The VM9314 is compatible with the PAC (Pacific Accessory Corporation) steering wheel control adapter SWI-PS. A 3.5mm female connector (labeled “SWC Interface”) on the back of the head unit allows connectivity to the PAC adapter. Please refer t...
Page 28 - VERSION Sub-menu Features
24 VM9314 SECURITY Sub-menu Features. VERSION Sub-menu Features Selection the VERSION tab to view the model number and system software version information. P.VOL Sub-menu Features Setting Options Function Password ****** Enter the current password (default is 012345) and touch the arrow (enter) key ...
Page 30 - DVD Sub-menu Features
26 VM9314 BT (Bluetooth) Sub-menu Features DVD Sub-menu Features If a DVD supports more than 1 Subtitle or Audio language, all the languages are available for selection during playback. If the selected language is not supported by the DVD, then the default language is used. Setting Options Function ...
Page 31 - RADIO Sub-menu Features; Exiting the System Setup Menu; To exit setup mode and resume normal playback, touch the
27 VM9314 NOTE: Record the password and keep it in a safe place for future reference. The rating for each disc is marked on the disc, disc packing, or documentation. If the rating is not available on the disc, the parental lock feature is unavailable. Some discs restrict only portions of the disc an...
Page 32 - TUNER OPERATION
28 VM9314 TUNER OPERATION To access the radio (HD) screen, press the SRC button (2) on the front panel or remote control (8) or touch the top left corner of the screen to access the Source menu, and then touch the “RADIO” icon. With the screen closed, press the SRC button (8) on the remote control u...
Page 33 - NOTE: The BAND button on the unit only works when the TFT is closed.
29 VM9314 17. (a) Current source (b) Touch to view the SOURCE MENU and select a new source 18. AS : Scan and automatically store strongest received stations 19. : View the SETUP menu 20. TAG : Tag the current song for possible iTunes download. If an iPod is connected, the tag goes directly to the iP...
Page 34 - Direct Tuning; GOTO; Using Preset Stations; Storing a Station; MEM
30 VM9314 Direct Tuning To enter a radio station directly, touch the button or press the GOTO button (21) on the remote control to display the direct entry menu. Enter the desired radio station using the on-screen number pad. Press the arrow (enter) button to tune to the selected station. To exit th...
Page 35 - AS; the Auto Store function.
31 VM9314 Recalling a Station 1. Select a band (if needed). 2. Touch an on-screen preset button (6) to select the corresponding stored station. Auto Store (AS) To select 18 strong stations and store them in the current band: 1. Select a band (if needed). 2. Touch the AS button (18) on page 1/2 of th...
Page 36 - DVD/VCD VIDEO OPERATION; Opening/Closing the TFT Video Screen; Opening the TFT Screen; Inserting a Disc
32 VM9314 DVD/VCD VIDEO OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “WARNING!!! It is illegal to view video while driving or operat...
Page 37 - Resetting the Loading Mechanism; Accessing DVD Mode; To switch to DVD mode when a disc is already inserted, press the; button; Table 5: DVD/VCD Remote Control Functions
33 VM9314 Resetting the Loading Mechanism If the disc loads abnormally or an abnormal core mechanism operation occurs, press and hold the button (8) on the unit or remote control (35) to reset the loading mechanism. Normal operation resumes. Accessing DVD Mode To switch to DVD mode when a disc is al...
Page 38 - Controlling Playback; Stopping Playback; Pausing Playback
34 VM9314 Controlling Playback To access the on-screen controls, touch the bottom 1/3 of the screen while a DVD is playing. Touch the 1/2 button to view a second page of controls Stopping Playback Touch the stop button ( ) on the screen or press the || / BAND button (20) on the remote control to sto...
Page 39 - RPT; NOTE: For VCD play, the repeat function is not available if PBC is on.; Accessing the DVD Menu; MENU; Moving Through Chapters
35 VM9314 Fast Forward Playback Press the button (14) on the remote control or the button on the screen to fast forward. Keep pressing and releasing the button to increase the rate from “x2” to “x4”, “x8”, and “x20”. Press /|| (18) on the remote control or touch the on-screen play button ( ) to resu...
Page 40 - DVD Search; Search; VCD Track Search
36 VM9314 Press the | button (17) on the remote control or the | button on screen to move to the previous chapter. Goto Search (Remote Control Required) During DVD or VCD playback, perform the following steps to use the GOTO feature to access a specific location on a disc: 1. Press the GOTO button (...
Page 41 - Direct Chapter / Track Selection; Remote Control Direct Entry; Enter; Viewing an Alternate Picture Angle (DVD Only); ANGLE
37 VM9314 Direct Chapter / Track Selection Remote Control Direct Entry During DVD, VCD and CD playback, you can use the numeric keypad on the remote control (29) to access a track directly. Touch Screen Direct Entry To select a chapter/track directly, touch the button on screen control to display th...
Page 42 - Zooming; ZOOM; Changing Audio Language; Changing Subtitle Language; SUBTITLE; Playback Information; DVD Playback Information
38 VM9314 Zooming Press the ZOOM button (23) on the remote control to enlarge and pan through the video image using the following options: “Q1”, “Q2”, “Q3” and “OFF”. Multi-Language Discs (DVD Only) Changing Audio Language If you are watching a disc recorded in multiple languages, press the AUDIO bu...
Page 43 - General Disc Information; Table 6: Disc Properties; Table 7: Disc Symbols; Symbol
39 VM9314 • Chapter 2/16 – Indicates that the second of 16 titles on the DVD is currently playing. VCD Playback Information • VCD2.0 – Format of current disc. • Time 00:01:30/00:36:10 – Indicates the playback time of the current track. • PBC On/Off – Indicates whether Play Back Control is On or Off....
Page 45 - DVD/CD AUDIO OPERATION; Accessing DISC Mode; To access the DISC screen, press the; the remote control until the “DISC” is displayed on the LCD.; On-Screen Controls and Indicators; Current track and total number of tracks on disc
41 VM9314 DVD/CD AUDIO OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and CD operation. Please see the DVD/Disc Video Operation section for information about these topics. The VM9314 will play music or other audio files from the following disc media: • CD-DA • CD-R/RW •...
Page 47 - During disc play, press the; button (34) on the remote control to play the; INT; button again to cancel the function and play the selected track.; Table 8: CD/DVD Audio Remote Control Functions
43 VM9314 Remote Control Functions Track Scan Select (CD-DA discs only) During disc play, press the INT button (34) on the remote control to play the first 10 seconds of each track. When a desired track is reached, press the INT button again to cancel the function and play the selected track. Table ...
Page 48 - Direct Track Entry; To select a track directly, touch the; . To clear your entry and start over, touch
44 VM9314 Direct Track Entry To select a track directly, touch the button on screen control to display the direct entry menu. Enter the desired track using the on-screen number pad. Press the enter button (arrow) to play the selected track. To exit the screen without selecting a track, touch Exit . ...
Page 49 - MP3 OPERATION; Media and File Requirements; MP3 Format Compatibility
45 VM9314 MP3 OPERATION Instructions for TFT control and Insert/Eject are the same for DVD and MP3 operation. Please see the DVD/Disc Video Operation section for information about these topics. Media and File Requirements This player allows you to play back MP3 and WMA files recorded onto CD-R/RWs, ...
Page 50 - Inserting a USB Device; To remove the USB device, press the; mode and then remove the USB device from the USB connector.
46 VM9314 For example, a medium with the following folder/file hierarchy is subject to Folder Search, File Search or Folder Select, as shown below. The VM9314 player will only recognize three folder levels and does not display folders containing only other folders. In the example above, the unit wil...
Page 51 - Accessing an SD Card; Insert the SD card into the SD connector.; NOTE: Maximum SD card size supported by this unit is 16GB.; Accessing MP3 Mode; To access the MP3 interface screen, press the; button (8) on the remote control until the appropriate source
47 VM9314 Accessing an SD Card 1. Locate the SD connector (9) on the front of the radio. 2. Insert the SD card into the SD connector. 3. Press the SRC button (2) on the front panel or remote control (8) or touch the top left corner of the screen to access the Source menu, and then touch the “SD” ico...
Page 53 - LOUD; : View the previous folder; press the; Table 9: MP3 Remote Control Functions
49 VM9314 21. Repeat and Random playback indicators22. LOUD : Turn loudness features ON/OFF 23. DIR - : View the previous folder 24. DIR + : View the next folder 25. : List audio files 26. : List photo files (see “Viewing JPEG Photos” on page 50) 27. : List video files (see 28. :Activate/deactivate ...
Page 54 - VIEWING JPEG PHOTOS; Returning to the Music Interface
50 VM9314 VIEWING JPEG PHOTOS JPEG images stored as individual images or stored in folders can be accessed using the DISC/SD/USB interface. When a disc/card is loaded and read by the unit, the root menu will display the music contents of the disc when music files are present. To view photos, press t...
Page 55 - MPEG MOVIE PLAYBACK
51 VM9314 MPEG MOVIE PLAYBACK Version 1 and 2 MPEG movies can be accessed using the DISC/SD/USB interface. When a disc/card is loaded and read by the unit, the root menu will display the music contents of the disc when music files are present. To view MPEG movies, press the button to view a second p...
Page 57 - Listeners can subscribe to XM; Accessing XM
53 VM9314 XM ® RADIO OPERATION Listeners can subscribe to XM ® Radio on the Web by visiting www.xmradio.com, or by calling (800) 967-2346. Customers should have their Radio ID ready (see “Displaying the Identification (ID) Code”). Customers can receive a limited number of free-to-air channels withou...
Page 59 - Recalling a Station
55 VM9314 Storing a Station 1. Select a band (if needed), then select a station. 2. Touch the on-screen MEM button to open the preset screen. 3. Touch the preset number in which you would like to store the current station (or press Exit to cancel and close the menu). The preset number and station ap...
Page 60 - Channel/Category Guide Mode; Channel Guide Mode
56 VM9314 Channel/Category Guide Mode There are two search modes to help navigate through channels and or categories. To access the Channel/Category Guide mode, touch the CG button. Channel Guide is the default search mode. To access Category Guide, press the SUBTITLE button (9) on the remote contro...
Page 61 - Category Guide Mode
57 VM9314 Category Guide Mode When Category Mode is selected, folder icons appear on the screen next to category choices. • While in Search Mode, to switch between Channel and Category search modes, touch the CH or CAT buttons on the screen. • Use the scroll bar and arrows on the touch screen to vie...
Page 62 - iPod OPERATION; Accessing iPod Mode; iPod Classic
58 VM9314 iPod OPERATION NOTE: Be sure your iPod has the latest Apple firmware installed to avoid connectivity issues. Accessing iPod Mode This unit is Made for iPod and works with iPhone. You can control your iPod via touch screen to access Playlist, Artist, Album, Songs, etc. Supported models incl...
Page 64 - Controlling your iPod; File Playback; Menu
60 VM9314 Controlling your iPod Touch the button or press the following remote control buttons to access the main iPod menu. Use the touchscreen or the directional keys on the remote control to navigate the iPod menus. File Playback To access files, touch the button on screen until you return to the...
Page 66 - BLUETOOTH OPERATION; NOTE: Bluetooth operation requires an optional BTM15 accessory.; About Bluetooth
62 VM9314 BLUETOOTH OPERATION NOTE: Bluetooth operation requires an optional BTM15 accessory. The BTM15 module has a secondary microphone for voice recognition. When installing the BTM15, the original single microphone that came with the VM9314 can be disconnected and the BTM15 secondary microphone ...
Page 68 - Bluetooth User Interface
64 VM9314 Bluetooth User Interface The on-screen indicators and touch key areas for Bluetooth operation are outlined below. 1. Name of connected device 2. Current time 3. List of previously paired devices 4. Current operation status 5. LOUD : Turn loudness features ON/OFF 6. : Transfer active call b...
Page 69 - : Access the direct entry screen; Table 12: Bluetooth Remote Control Functions
65 VM9314 17. : Access the direct entry screen 18. Touch the scroll bar and arrows to view the previous/ next page of choices (only visible when needed) 19. | : Previous file 20. ||: Play/pause 21. | : Next file 22. : Stop A2DP playback Hands Free Profile (HFP) To use a phone wirelessly with this un...
Page 71 - Answering an Incoming Call; Making an Outgoing Call; button from the main Bluetooth screen to
67 VM9314 Reconnecting Once the Bluetooth device has been paired, you can touch the connect button (9) to reconnect. NOTE: You can only connect to a phone using the buttons on the on-screen Phone interface. Each time the button is pressed, the head unit will automatically reconnect with the mobile p...
Page 74 - Bluetooth Setup; Auto Answer; Advanced Audio Distribution Profile (A2DP)
70 VM9314 Bluetooth Setup Auto Answer You can choose to have the VM9314 automatically answer incoming calls to your paired Bluetooth phone. To turn “Auto Answer” on: 1. Touch the button to view the SETUP menu. 2. Select the “BT” sub-menu. 3. Touch the area to the right of “Auto Answer” to select “On...
Page 75 - REAR CAMERA FUNCTION
71 VM9314 REAR CAMERA FUNCTION This unit is “camera ready.” Before accessing any camera features, you must install a rear video camera. When the camera is not installed and the function is accessed by gear selector being placed in reverse or by the unit’s menu, the message “NO VIDEO SIGNAL” will app...
Page 76 - TROUBLESHOOTING; Table 13: Troubleshooting; Problem
72 VM9314 TROUBLESHOOTING Table 13: Troubleshooting Problem Cause Corrective Action GENERAL Unit will not power on Radio Fuse blown Install new fuse with correct rating Car battery fuse blown Install new fuse with correct rating Illegal operation Press the RESET button located in the bottom right co...
Page 78 - Error Messages; Table 14: Error Messages
74 VM9314 Error Messages Incorrect play-back message displayed Message is longer than LCD can display Table 14: Error Messages Message Displayed Cause Corrective Action Loading Disc is being read No Disc Disc is dirty Clean disc with soft cloth Disc is upside down Insert disc with label side up Disc...
Page 79 - Care and Maintenance; Do not get water or cleaning fluids on the unit.
75 VM9314 Care and Maintenance 1. Use only a clean silicone cloth and neutral detergent to clean the front panel or monitor. A rough cloth and non-neutral detergent (such as alco-hol) may result in scratching or discoloration. 2. Do not get water or cleaning fluids on the unit. 3. If the temperature...
Page 80 - SPECIFICATIONS
76 VM9314 SPECIFICATIONS DVD/CD Player Compatible Disc Media: DVD + R / RW (Single and Dual Layer) and CD-R / RWCompatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, Xvid, AVI, MPEG1 / 2 Signal to Noise Ratio: >95dBADynamic Range: >95dBFrequency Response: 20Hz to 20 kHz, -3dBChannel Separation...