Page 3 - TABLE OF CONTENTS
i VM8013 TABLE OF CONTENTS Introduction ..............................................................................................1Installation ................................................................................................1Wiring ...................................................
Page 4 - ii
Page 5 - Tools and Supplies
VM8013 1 INTRODUCTION Congratulations on your purchase of the Jensen VM8013 Mobile Multimedia Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM8013 installed by a reputable installation shop. INSTALLATION This unit is des...
Page 7 - WIRING; Power Antenna; Yellow; Chassis Ground
VM8013 3 WIRING NOTE: The amplifier in this radio is only designed for use with four speakers. Never combine (bridge) outputs for use with two speakers. Never ground negative speaker leads to chassis ground. Failure to wire exactly as shown may cause electrical damage to the radio. NOTE: Only connec...
Page 8 - FRONT PANEL RELEASE; Detaching the Front Panel
VM8013 4 FRONT PANEL RELEASE The front panel release button (4) releases the mechanism that holds the front panel to the chassis. Detaching the Front Panel To detach the front panel, perform the following steps: 1. Press the power button (1) to turn the unit off. 2. Press the front panel release but...
Page 9 - REMOTE CONTROL; Operating Range; REMOTE SENSOR
VM8013 5 REMOTE CONTROL The remote control will allow you to control the advanced functions of the VM8013. Operating Range The remote control sensor (19) is located near the bottom of the front panel, left of the LCD screen. The remote control can operate within a distance of 3~5m. Replacing the Bat...
Page 11 - OPERATION; Press and hold; SRC
VM8013 7 OPERATION Power Press the (power) button (1) to turn the unit on. Press and hold the power button again to turn the unit off. NOTE: LCD panels may take longer to respond when subjected to cold temperatures for an extended period of time. In addition, the visibility of the numbers on the LCD...
Page 12 - Menu Operation; Dimmer; DISP
VM8013 8 The unit automatically saves your changes and exits the audio control menu after five seconds of inactivity. Menu Operation Press and hold the VOL/SEL/MENU button (2) for more than two seconds to access the menu. Press the VOL/SEL/MENU button to move through the following menu options: Equa...
Page 13 - Reset Button; The; button is located behind the front panel and can only be; RESET; clear the system and return the unit to default operation.
VM8013 9 Reset Button The RESET button is located behind the front panel and can only be accessed with the front panel opened. Resetting the unit will erase the time and preset memories. It should only be activated upon initial installation after all wiring is complete, or if there is a malfunction ...
Page 14 - SATELLITE RADIO OPERATION; Accessing Satellite Radio Mode; Storing a Station; Channel Search; AM; XM Preview
VM8013 10 SATELLITE RADIO OPERATION Listeners can subscribe to XM® Radio on the Web by visiting www.xmradio.com, or by calling (800) 967-2346. Customers should have their Radio ID ready (see “Displaying the Identification (ID) Code”). Customers can receive a limited number of free-to-air channels wi...
Page 15 - CAT; News; DIRECT
VM8013 11 Category Search 1. To access Category Search mode, press the DISP button (7) twice. The list of available categories appears on the screen. 2. Rotate the VOL/SEL/MENU rotary encoder (2) on the control panel or press the up/down arrow keys (5) on the remote control to navigate the list of c...
Page 16 - RADIO OPERATION; Seek Tuning; press and hold; PTY; ST
VM8013 12 RADIO OPERATION Accessing Radio Mode Press the SRC button (6) on the front panel or remote control (14) to switch to the RADIO source. 1. Stereo Reception Indicator 2. Radio Station Frequency 3. AM/FM Band 4. Time/Clock 5. RDS Information 6. Current Preset Channels 7. Source Indicator 8. P...
Page 18 - Nero
VM8013 14 DISC/MP3/WMA PLAYBACK Inserting and Ejecting a Disc Press the button (4) to flip the front panel down. Insert a disc, label side up, into the disc slot (20). To stop disc play and eject the disc, press the button to flip the front panel down and then press the eject button (21). NOTE: The ...
Page 20 - Pause; INT; P2 - The Smashing Pum
VM8013 16 Changing the Source If a disc is already in the disc slot but is not playing, press the SRC button (6) on the front panel or remote control (14) to switch to the DISC source. To play files from an SD or USB that is already inserted, choose the CARD or USB source. The MP3 playback screen is...
Page 21 - on the remote control; GOTO Track Time Access; NOTE: The VM8013 does not support Surround Sound decoding.
VM8013 17 Section Repeat (A-B) To repeat a specified section of a track, perform the following steps: 1. Press the A->B button (16) on the remote control to select the starting point. The display will show “REPEAT A-”. 2. Press A->B when you reach the desired ending point. The display shows “R...
Page 22 - CONTROLLING YOUR iPod; iPod Music Playback
VM8013 18 CONTROLLING YOUR iPod The unit will automatically switch to iPod mode when an iPod is plugged into the iPod cable. To return to the iPod screen from any other source, press the SRC button on the front panel (6) or remote control (14) and select SOURCE >> iPod. After switching to iPod...
Page 23 - During disc play, press the; SETUP; access the SYSTEM SETUP menu.; SETUP MENU
VM8013 19 SETUP MENU During disc play, press the SETUP button (4) on the remote control to access the SYSTEM SETUP menu. Use the , , or cursor buttons to choose between LANGUAGE, VIDEO, AUDIO, RATING or MISC setup options. Table 1: System Setup Menu LANGUAGE MENU OSD language English Select the appr...
Page 24 - CARE AND MAINTENANCE; DVD Player; This
VM8013 20 CARE AND MAINTENANCE DVD Player The following guidelines will help you extend the life of your DVD player: 1. When cleaning the vehicle interior, do not get water or cleaning fluids on the unit. 2. The DVD player will not operate properly in extreme hot/cold or under damp conditions. In ca...
Page 25 - TROUBLESHOOTING; Problem
VM8013 21 TROUBLESHOOTING Problem Cause Corrective Action Does not operate (display does not light) No power to yellow wire; no power to red wire Check connection with test light; check vehi-cle fuse with test light Fuse blown Replace fuse No power to unit Fuse blown Check/replace fuse No/low audio ...
Page 26 - SPECIFICATIONS
VM8013 22 SPECIFICATIONS CEA Power Ratings Power Output . . . . . . . . . . . . . . . .13 watts RMS X 4 channels into 4-ohms @ < 1% THD+NSignal to Noise Ratio. . . . . . . . . . . . . . . 70dBA below reference (reference: 1 watt, 4-ohms)Frequency Response . . . . . 20Hz to 20kHz (-3dB), Auxiliary...
Page 27 - Limited Warranty; DO NOT RETURN THIS PRODUCT TO THE STORE; What is not covered?
Limited Warranty DO NOT RETURN THIS PRODUCT TO THE STORE CD or Multimedia Radios/Headunits Audiovox Electronics Corporation (“the Company”) is committed to quality and customer service, and are pleased to offer you this Warranty. Please read it thoroughly and contact the Company at 1-800-323-4815 wi...
