JENSEN MS4200RS - Manual

Initial operation, Fig. 12 1. Reconnect the battery.2. Restore complete functioning of the electrical system (clock, trip computer, alarm system, airbag, immobilizer, etc.). 3. Switch on the ignition.4. Insert the map CD in the radio. To register the system and activate map, travel and/or traffic in...

Drive through several intersections and monitor the current vehicle position in the“ Car position ” information menu. Once the displayed position agrees with the actual car position, calibration is complete. Note: The system can also be calibrated without C-IQ contents activated. However, no directi...

Route & Sound – Navigating and listening to anaudio CD With the new generation of our navigation radio units, you may insert amap CD, plan your route, then insert an audio CD and the system willstill guide you to your intended destination. The navigation computersaves the road system in a define...

Comments After transport of the vehicle by train or ferry, the navigation system may require afew minutes for exact positioning.After disconnecting the vehicle battery, up to 15 minutes may be required for exactpositioning. For this, the vehicle must be outdoors and the system must be switchedon in ...

The system has the following safety functions to prevent theft: Removable operating panel Take the removable operating panel with you, whenever you leave the vehicle. Keepthe panel in its protective case. Always replace the operating panel before driving off.When the front is opened, acoustic signal...

RDS (Radio Data System) Many FM stations transmit RDS information. The navigation radio evaluates the RDS telegram and offers the following advantages: – PS ( P rogram S ervice Name): Display of station name, – PTY ( P rogram TY pe): Station selection by program type, ➽ page 25 – AF ( A lternative F...

Control elements 1 REL . . . . . . . . . Release button for removable control panel 2 VOL/POWER . . Press: On / Off . . . . . . . . . . . . Turn: Setting the volume 3 TUNE . . . . . . . Radio mode. ➽ page 24 . . . . . . . . . . . . In radio mode: Opens the “ RADIO ” menu. 4 TEL . . . . . . . . With ...

Displays In radio mode: In CD player mode: In CD changer mode: In navigation mode: The menus and displays for navigation mode appear in the “NAVIGATION” section. 14 OPERATION t RADIO 6 FM DX 13:29 105.9 FFH Frequency Time Waveband Program (Station) name(only with RDS stations) Selected search sensit...

Inserting a CD 1. Open the front panel.2. Insert the CD into the drive (printed side up). For audio CDs, playback starts automatically. 3. Close the front panel. Removing a CD 1. Press the eject button to open the front panel. 2. Carefully remove the CD and close the front panel. Switching on / off ...

Menu operation Cursor The currently selected line or field on the screen isdesignated as the cursor. The cursor is identified byan inverse field (bright letters on black background). ☞ Move the cursor using the cursor buttons 8 , 2 , 4 or 6 . ☞ Confirm your selection by pressing the OK button. : To ...

Entering letters Characters are entered by selecting letters from a list.In the following, this type of entering will simply becalled “keyboard”. ☞ Move the cursor using the cursor buttons 4 , 6 , 8 and 2 to the desired letter. ☞ Confirm the selection by pressing OK . Non-selectable letters are disp...

Normal and expert modes With its radio, CD and CD changer modes, the unit offers two possible methods forselecting the functions. You can choose between the “ Expert ” and “ Common ” modes. The “ Expert ” mode reduces the number of operator steps when selecting search functions. Instead of four butt...

The “INFORMATION” menu The “ INFORMATION ” menu allows you to configure the type and amount of information the unit willreceive via the radio data system (RDS). The RDS-based functions may not be available incertain areas of the U.S. ☞ Press the INFO button. : The “ INFORMATION ” menu is displayed. ...

Behavior of TMC and TA If you switch on TMC Scan, you ensure that the radio will only search for stationstransmitting TMC data during the automatic search.If the reception quality of the TMC station deteriorates drastically, the unit will indicatethis by outputting a warning message. If you do not n...

The “SOUND” menu In the “ SOUND ” menu, you can set your navigation radio’s sound and several other sound reproductionparameters to your own preferences.The sound settings for bass and treble/tone are valid forthe currently active sound source (radio, CD or CDC). ☞ Press the SOUND button. : The “ SO...

Radio Listening to radio If the unit is not yet in radio mode: ☞ Press the TUNE button. Select waveband In radio mode: ☞ Press the BAND button. ☞ Select the desired waveband and press OK . ✎ The following wavebands are available: FM, FM AST (Autostore) AM, AM AST (Autostore). FM AST andAM AST can on...

The “RADIO” menu In radio mode: ☞ Press the TUNE button. : The “ RADIO ” menu is displayed. The following functions are available: RDS Memo (only on FM) Searches for all currently available RDS stations andstores them in alphabetic order. ☞ Activate this function to refresh the RDS Memo. ✎ Refreshin...

Extra info Display of information on the selected station: – recall number (if the station was stored), – station name (for RDS stations), – frequency, – program type (PTY, if the station transmits the PTY ID) and – the selected sound type for radio mode. PTY search (only on FM) This function allows...

CD player You can play 12 cm audio CDs on your CD player. A We strongly recommend only playing 12 cm CDs. Please do not use 8 cm CDs (neither with nor without adapter). A ON NO ACCOUNT must unusually-shaped CDs be inserted into the player. If you ignore these recommendations, you risk damaging your ...

The “CD” menu In CD player mode : ☞ Press the CD button. : The “ CD ” menu is displayed. The following functions are available: Scan ☞ Activate this function to briefly scan all tracks on the inserted CD. ☞ Press OK to cancel the scanning process and to listen to the track of your choice. Repeat Tra...

CD changer (accessories) A digital Jensen CD changer can be connected to the navigation radio. A We strongly recommend only playing 12 cm CDs. Please do not use 8 cm CDs (neither with nor without adapter). A ON NO ACCOUNT must unusually-shaped CDs be inserted into the player. If you ignore these rec...

The “CD CHANGER” menu In CD changer mode : ☞ Press the CDC button. : The “ CD CHANGER ” menu is displayed. The following functions are available: Scan ☞ Activate this function to briefly scan all tracks on the currently selected CD. ☞ Press OK to cancel the scanning process and to listen to the trac...

The “INITIALIZATION” menu ☞ Select “ Initialisation ” in one of the following menus: “ RADIO ”, “ INFORMATION ”, “ CD ” or “ CD CHANGER ”. : The “ INITIALISATION ” menu is displayed. The “ INITIALISATION ” menu allows you to adjust the navigation radio to your needs. The following functions are avai...

C-IQ – Your key to map, traffic and travel information Your navigation radio is supplied with a CD containing the latest version of the mapsoftware along with travel and traffic information (for dynamic navigation). Theinformation on the CD is encrypted and can be partially or completely activated f...

Activating products Once you have received your enable code, enter itinto the system. ☞ In the main control menu, select “ C-IQ ” then “ Code Input ”. ☞ The cursor appears automatically on the first digitof the code. ☞ Press OK to activate each digit in the code. ☞ Next, use the cursor keys to selec...

Main menu A map CD must be inserted into the CD player for some of the functions in navigationmode.If the unit is not yet in navigation mode: ☞ Press the NAVIGATION button. : The navigation main menu is displayed. The following items are available in the main menu: Destination input Opens the “ Dest...

Destination input Destinations may be entered in several ways: – Entering city, road and house number or crossroads by means of the “keyboard.”See the following page. – Loading an address stored in the personal address book. See page 50. – Recall one of the last 20 addresses used for guidance. – Sel...

Entering a new address An input wizard will help you enter a new address. It will lead you step by stepthrough all the necessary entries such as country, city, road, house number orcrossroads and required routing criterion. Step 1: City or zip code ☞ Select ” New address ” in the destination input m...

2. Step: Road : Once the city has been entered the input wizard automatically jumps to the“ Road: ” input menu. ☞ Enter the name of the road using the “keyboard” or select a name from the listusing ¯ . 3. Step: House number or intersection If house numbers are available for a selected road, they can...

Points of interest (POIs) You may also input the destination address by selecting special facilities (POI = Pointsof Interest) stored in the database. These include e.g.: – airports, – hotels, – gas station, – car repair garages – public parking, etc. Depending upon the information already entered i...

Special facilities in the vicinity of the current position You may also set a destination address by selecting a special facility in the vicinity ofthe current vehicle location. ☞ Briefly press the DEST/P.O.I. button twice or: ☞ Select “ Info on car pos. ” in the destination input menu. : A list of ...

Via point input If you wish to visit other locations en route to theentered destination address, these can be stored asvia points. The navigation system then plans the routeto include the via points in the given sequence beforethe destination address is reached.When you reach a via point, you will h...

Delete via points not reached Via point which you have not reached or which are no longer desirable to you must bedeleted from the via point list so that the navigation system may plan the route to thenext via point or to the final destination. If a not reached via point is not deleted, thesystem wi...

Guidance The guidance screen appears as soon as you activate the guidance. The guidance screen displays the following information : 1 Road direction arrow: The arrow indicates the course of the road. 2 Simplified presentation of the next turn-off prompt. 3 Turn-off prompt: A graphic display of the n...

Audible messages During guidance, the navigation radio will provide acoustic routing information inaddition to the symbols on the guidance screen. Commonly, the directive to turn intoanother road consists of two voice messages: an early warninge.g. “Right turn ahead” and the instruction to turne.g. ...

On longer route segments without intersections orcrossroads, an arrow is displayed indicating the courseof the road over the next 300 ft. In addition, areduced diagram of the next turn-off prompt appearson the left, above the route direction arrow. Thus,the driver is always warned in advance of the ...

Route selection During guidance, you may also modify the route criterion and activate or deactivatedynamic route planning. The system will then plan a new route taking into accountthe new setting of the current position of your car. ☞ In the guidance screen, select the symbol for route selection (on...

Information during guidance During guidance, you can call up several informationscreens: ☞ Move the cursor to the ™ symbol and confirm by pressing OK . ☞ The list of information menus appears. The following information menus are available: Route list This option is available as soon as a route has b...

Displaying / deleting via points If via points have been entered for the currentdestination, the “ Via points ” option will be active. The number of via points still to be reached alsoappears. ☞ Select the required via point from the list in orderto view details or delete it. Destination Display of ...

Alternative route During guidance, you can cause the navigation system to plan an alternative route.Use this function if, for example, you want to avoid stationary traffic reported viatraffic announcements or if you wish to plan an alternative route.The alternative route will be calculated for a sel...

Address manager The navigation radio offers the opportunity of storing at least 30 destination addressesin a personal address book. In the address book, you can store your destinationsseparately under the categories “Private” and “Business”. The “Home” and “Work”shortcuts, which can be programmed wi...

Emergency menu ☞ In the main menu, select “ Emergency ”. : The “ Emergency ” menu is displayed. The following options are available in the“ Emergency ” menu: GPS position Display of the current geographic vehicle location as calculated by the Global PositioningSystem. Longitude, altitude and elevati...

System settings To customise the navigation functions to your ownneeds, you can change several settings. ☞ In the main menu, select “ Settings ”. : The “ System settings ” menu is displayed. The following information screens are available: Speed In the “ Speed ” menu, you can configure the following...

Guidance screen Here you can select the information which should appear on the guidance screen. ■ Show event ☞ Select whether traffic obstructions on your route should appear in the top line ofthe guidance screen or not. ✎ This feature is not available in the U.S. ■ Remain. distance ☞ Select whether...

Default settings Select this option in order to reset all user-defined settings to their default values. Allentries in the address book will remain stored. Mounting angle To adapt the navigation computer to the mounting angle of the radio in the dashboard(gyro-sensor compensation). This adjustment n...

Loading software updates In order to extend the range of functions provided by the unit, you can load newsoftware versions from a software update CD, if available for your navigation radio: ☞ Switch on the radio. ☞ Open the front and remove the CD if still inserted. ☞ Insert the software update CD i...

Troubleshooting In rare instances, your navigation radio may not function the way you expect it to.Before calling for technical assistance, please read the operating instructions thoroughly and go through the following check list; it may be possible to quicklyremedy an apparent malfunction. Symptoms...

WARRANTY 12-Month Limited Warranty AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original pur...

CEA Power Ratings Power Output: 1 3 watts RMS X 4 channels into 4-ohms @ < 1% THD+N Signal to Noise Ratio @ 1kHz: 70dBA below reference. (Reference: 1 watt, 4-ohms)Dynamic Power: 26 watts @ 4-ohms x 4 channels Frequency Response: 20Hz to 20kHz (-3dB)Reference Supply Voltage: 14.4VDC CD Player Sig...