JennAir JMW9527DAQ - Manual
JennAir JMW9527DAQ – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
MICROWAVE WALL OVEN COMBO
1. Excluding door handle.
2. 1 1/4" Diameter Conduit Access Hole. Hole must be cut as close to corner of cabinet as possible.
3. 5/8" plywood floor (must support 310 pounds).
4. Do not block air intake slots along bottom of oven.
5. Installed combo wall oven overlaps the cut out 15/16" (2.4 cm) at the top and 1/8" (.3 cm) at the bottom.
This must be taken into consideration when locating cutout if installed unit is to be centered in the cabinet.
6. These appliances have been designed in accordance with the requirements of various safety agencies and comply
with the maximum allowable wood cabinet temperatures of 194
˚
F. If these appliances are installed with cabinets
that have a lower working temperature than 194
˚
F, discoloration, delamination or melting may occur.
Electrical requirements:
Provide for 120/240 or 120/208 VAC, 60 Hz.
See serial plate on front of unit for power requirements
NOTES:
Style of product may vary from picture
B
C
2 3
D
E
H
F
G
J
4
PRODUCT DIMENSIONS
INCHES
CENTIMETERS
MODEL SKUs
JMW9527DAB
JMW9527DAQ
JMW9527DAS
JMW9527DAW
Important:
Because of continuing product improvements, Jenn-Air
®
reserves the right to change specifications without notice. Dimensional specifications are provided for
planning purposes only. For complete details see installation instructions that accompany each product before selecting cabinetry, making cutouts or beginning installation.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
