Page 3 - CONTENTS
3 Important Safety Instructions ............................................................. 4 Precautions ........................................................................................ 5 Suspension of Loudspeaker Systems ............................................... 6 Watch for These S...
Page 4 - IMPORTANT SAFETY INSTRUCTIONS
4 1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use this apparatus near water.6. Clean only with dry cloth.7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.8. Do not install near any...
Page 5 - PRECAUTIONS
5 The PRX700 series speakers covered by this manual are not intended for use in high moisture environments. Moisture can damage the speaker cone and surround and cause corrosion of electrical contacts and metal parts. Avoid exposing the speakers to direct moisture. Keep speakers out of extended or i...
Page 6 - SUSPENSION OF LOUDSPEAKER SYSTEMS
6 Are You New to Rigging? If you are new to rigging, you should do the following: • Read and study JBL Technical Note Volume 1, Number 14: Basic Principles for Suspending Loudspeaker Systems (available at http://www.jblpro.com/catalog/support/getfile.aspx?docid=296&doctype=3). • Know the rules f...
Page 9 - PRX700 Series Speakers Declaration of Conformity
9 UL Compliance Specifications CUL 60065 7th Ed. IEC 60065(ed.7), IEC 60065(ed.7);am1, IEC 60065(ed.7);am2 EN 60065:2002/A1:2006/A11:2008/A2:2010/A12:2011 FCC Compliance Notice This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device m...
Page 10 - CAUTION; The PRX700 Series Power Amplifier
10 AC Power Requirements Standard PRX700 series speaker systems are equipped with a multi-channel Class-D power amplifier and loudspeaker specific DSP electronics and require appropriate AC power. Before plugging a PRX700 speaker into an outlet ensure that it is able to provide the appropriate AC po...
Page 11 - Introduction to the PRX700 Series
11 Introduction to the PRX700 Series PRX710 PRX712 PRX715 PRX718XLF PRX715XLF PRX725 PRX735 Thank you for choosing the JBL PRX700 series self-powered PA loudspeakers. The PRX700 Series represent an evolutionary step in the efficient use of amplifier power, rugged durability and enhanced versatility ...
Page 12 - Powered Speaker Systems
12 Powered Speaker Systems A Closed System Architecture… There is much confusion these days in the world of powered speakers especially when it comes to defining “performance”. What constitutes “exceptional performance”? Is it wattage ratings, driver dimensions, cabinet dimensions, sound pressure le...
Page 13 - SYSTEM SPECIFICATIONS
13 SYSTEM SPECIFICATIONS PRX710 PRX712 PRX715 PRX725 PRX735 SYSTEM SPEC System Type: Self powered two-way 10” woofer 1” exit compression driver, bass reflex Self powered two-way 12” woofer 1” exit compression driver, bass-reflex Self powered two-way 15”woofer 1” exit compression driver, bass-reflex ...
Page 14 - SYSTEM SPECIFICATIONS; Subwoofers
14 PRX715XLF PRX718XLF SYSTEM SPEC System Type: Self powered 15”, bass-reflex Self powered 18”, bass-reflex Max SPL Output: 131 dB 134 dB Frequency Range (-10 dB): 37 Hz - 113 Hz 30 Hz - 103 Hz Frequency Response (±3 dB): 44 Hz – 91 Hz 35 Hz - 87 Hz Input Connectors: Two Balanced female XLR/ 1/4” co...
Page 16 - SYSTEM SET UP - FULL RANGE MODELS
16 SYSTEM SET UP - FULL RANGE MODELS PRX700 Amplifier Input Configuration for PRX710, PRX712, PRX715, PRX725 and PRX735: 1 2 3 4 5 67 9 10 11 13 12 8
Page 18 - SYSTEM SET UP - SUBWOOFERS
18 1 2 3 4 5 67 9 8 SYSTEM SET UP - SUBWOOFERS PRX700 Amplifier Input Configuration for PRX715XLF and PRX718XLF:
Page 20 - TROUBLESHOOTING
20 Symptom Likely Cause What to do No sound Speaker not connected to active AC power Verify that speaker is connected and that circuit is on. Switch on power and verify that illuminated logo is on. • Re-seat the power cable at both ends. • Substitute a known-good power cable. Speaker power cable is ...
Page 21 - Section 7: Connection Types
21 Hum or Buzz that increases or decreases when the mixer level controls are moved Improper A/C ground or faulty equipment connected to mixer input Disconnect or mute channels one at a time to isolate the problem. Refer to the owner’s manual of the faulty equipment for troubleshooting help. Faulty c...
Page 22 - CONTACT INFORMATION
22 Mailing Address: JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 Shipping Address: JBL Professional 8500 Balboa Blvd., Dock 15 Northridge, CA 91329 (Do not return product to this address without first obtaining prior authorization from JBL) Customer Service: Monday through Friday 8:00am -...
Page 23 - WARRANTY INFORMATION
23 The JBL Limited Warranty on PRX700 is in effect for three years from the date of the first consumer purchase. Who Is Protected By This Warranty? Your JBL Warranty protects the original owner and all subsequent owners so long as: A.) Your JBL product has been purchased in the Continental United St...