JBL JBLSSW3BLK - User Manual

JBL JBLSSW3BLK

JBL JBLSSW3BLK Speaker – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
Page: / 12

Table of Contents:

  • Page 3 – SPEAKER CONNECTIONS; Wire Length; USING ONE SSW-3 SUBWOOFER IN MONO MODE; Amplifier
  • Page 4 – USING TWO SSW-3 SUBWOOFER IN STEREO MODE; INSTALLATION GUIDE; Mounting Holes for Bushings:
  • Page 5 – hold the enclosure in position.
  • Page 7 – DIMENSION DRAWINGS
  • Page 8 – PAINTING THE GRILLE; masking tape if desired.
  • Page 9 – TROUBLESHOOTING; Symptom; SPECIFICATIONS
  • Page 10 – 別の言語に対応したユーザーマニュアルを読むには、JBL SYNTHESIS.COMにアクセスしてください。; 产品中有害物质的名称及含量
Loading the manual

OWNER’S MANUAL

JBL® Synthesis SSW-3

IN-WALL SUBWOOFER

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - SPEAKER CONNECTIONS; Wire Length; USING ONE SSW-3 SUBWOOFER IN MONO MODE; Amplifier

3 www.jblsynthesis.com En gl is h SPEAKER CONNECTIONS Since the SSW-3 is a passive subwoofer, only speaker-level connections are available. The SSW-3 subwoofer is specifically designed for use in conjunction with the JBL® Synthesis SDA amplifiers. It is optimized to offer the best dynamics and frequ...

Page 4 - USING TWO SSW-3 SUBWOOFER IN STEREO MODE; INSTALLATION GUIDE; Mounting Holes for Bushings:

4 USING TWO SSW-3 SUBWOOFER IN STEREO MODE Receiver/Processor Amplifier Subwoofer or main Amp out Left Right Right Left Right Left Line-Level Inputs Speaker-Level Outputs Left top/bottom of SSW-3BB back box Right top/bottom of SSW-3BB back box INSTALLATION GUIDE A complete SSW-3 loudspeaker system i...

Page 5 - hold the enclosure in position.

5 5 www.jblsynthesis.com En gl is h Installation: 1. Place the Styrofoam™ blocks on the bottom plate of the stud bay. The SSW-3BB back box will rest on top of the blocks. 2. Install the two centering bars as shown in Detail A. The centering bars are for setting the depth of the enclosure. They also ...

Other JBL Speakers Models

All JBL Speakers