Jasco RM94904 - Manual - manualsarea.com

Page 3 - Battery Installation; On the back of the remote, push down on

MUTEThe Mute button operates the same as onyour original remote.PREV CHThe PREV CH (Previous Channel) button oper -ates the same as on your original remote.0-9The number buttons operate the same as onyour original remote, and are used for enter-ing device codes.TV•VCRThe TV•VCR button operates the T...

Page 5 - Programming For TV; Press and release the; TV CODE

Programming For TV 1. Manually turn on the TV. 2. Press and hold the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button. 3. Press and release the TV button (the INDICATOR LIGHT will blink then remain lit). 4. Find the three digit code for your TV in the code list in theback...

Page 6 - Programming For VCR; Press and release; VCR CODE

Programming For VCR 1. Manually turn on the VCR. 2. Press and hold the SETUP button until the INDICATOR LIGHT lights, then release the SETUP button. 3. Press and release the VCR button (the INDICATOR LIGHT will blink then remain lit). 4. Find the three digit code for your VCR in the code list in the...

Page 7 - Programming for Cable /DVD

Programming for Cable /DVD Use the CBL/DVD button to assign your cable box or DVD player. This button could also be assigned to a CDplayer, another TV, VCR or DVD player. 1. Manually turn on the Cable Box, DVDPlayer, or other device. 2. Press and hold the SETUP button until the INDICATOR LIGHT light...

Page 8 - Programming With Code Search; Turn on the device

8 Programming With Code Search If your TV, VCR, or Cable Box does not respondafter you have tried all the codes for yourbrand, or if your brand is not listed, try search-ing for your code by following the stepsbelow. 1. Turn on the device you wish to program. 2. Press and hold SETUP until the INDICA...

Page 9 - Retrieving Codes; Press and hold SETUP

Retrieving Codes If you need to find the three-digit code foryour device, after your device is set-up using Code Search, use this procedure. 1. Press and hold SETUP until the INDICATOR LIGHT lights, then release SETUP. 2. Press and release the device button for the device’s code youare retrieving (T...

Page 10 - Menu Functions; The Menu is used to make changes such as; Entering the Menu Mode:; button on the remote.

Menu Functions The Menu is used to make changes such as setting color, channels, timers, etc. Entering the Menu Mode: 1. Push the DEVICE button on the remote. 2. Push the MENU button. This puts the remote in Menu Mode. The Menu should now be visible on the television. The INDICATOR LIGHT will blink ...

Page 11 - Exiting the Menu Mode:; Operating a T V / VC R C o m b o

Exiting the Menu Mode: To exit the Menu Mode and clear the screen push the DEVICE button on the remote. The INDICATORLIGHT should go out indicating the remote is now out of Menu Mode and will revert to it’snormal mode of operation. NOTE: The remote will automatically exit the MenuMode after 10 secon...

Page 12 - Tr ouble Shooting

12 Pr oblem Indicator Light not blinking when youpress any key The RM94905 doesnot operate yourdevice Not performing com -mands properly Problems program-ming a TV/VCR ComboUnit VCR not recording Channel up and downdo not function on anRCA TV Problems changingchannels No response after pressing a ke...

Page 13 - Limited Warranty; Jasco Products Company

13 Lose Your Codes? Enclosed with this remote is a sticker on whichyou should write the codes for each deviceyou programmed. Apply the sticker to the backof the remote or somewhere convenient forfuture reference. Also on the sticker is our website addresswhich, should you lose your codes or pro-gram...

Page 15 - Instalación De la Batería

15 Los botones del número funcionan igual que en sutelecontrol original, y se utilizan para introducircódigos de dispositi vo. TV*VCR El botón de TV*VCR funciona la función de TV*VCRde su VCR. ENTER El botón del ENTER (INTRODUCIR) funciona igualque en su telecontrol original. REV, PLA Y, FOR, REC, S...

Page 18 - CABLE BOX CODE

Pr ogramación Para El Rectángulo Del Cable/DVD 1. Gire manualmente el rectángulo del cable. 2. Presione y sostenga el botón de la SETUP hasta que las lucesde la LUZ de INDICADOR, despuésrelease/versión el botón de la SETUP. 3. Presione y release/ versión el botón del CABLE/DVD (sigue habiendo la LUZ...

Page 20 - Extraer Códigos

Extraer Códigos Si usted necesita encontrar el código tridigital parasu rectángulo de la TV, del VCR o del cable despuésde que su dispositi vo set-up usando búsqueda delcódigo, utilice este procedimiento. 1. Presione y lleve a cabo la SETUP hasta que las luces de la LUZ de INDICADOR (INDICATOR LIGHT...

Page 23 - In vestigación de a

24 Pr oblemo Luz de indicador delproblema que nocentelleo cuando usted presiona cualquier clave. El RM94905 no fun-ciona su dispositi vo No realizándose ordena corr e c t a- mente comandos Problemas que pro-graman una unidadcombo de TV/VCR. El VCR no está regis-trando. El canal hacia arribay hacia a...

Jasco RM94904 - Manual

Table of Contents:

Summary

Other Jasco Models