Page 2 - Table of Contents
2 Congratulations on your purchase of a 7 function Universal Remote Control. This remote is one of the most easy to use remote controls available today. Now juggling multiple remote controls is a thing of the past! Your Universal Remote controls up to seven devices, including the most popular brands...
Page 3 - CODE SEARCH; Setup
3 Battery Installation 1. On the back of the remote, push down on the tab and lift the cover off. 2. Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries. 3. Press the battery cover back into place. Battery Saver Your remote automatically turns off i...
Page 4 - Button Functions
4 VOLUME UP/DOWN Changes the volume level of the product, normally the TV. MUTE Turns off the TV sound while the picture remains. CODE SEARCH For setup. Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. PREV.CH may be call...
Page 6 - Operating Audio Functions; Audio Button Descriptions
6 Operating Audio Functions Note: Not all functions work for all brands. Turning on the Receiver or Mini-System Point the remote control at the receiver and press the AUDIO button. The receiver should turn on. In some cases you might need to press the AUDIO button and then the ON•OFF button to turn ...
Page 7 - AM/FM Tuner Functions
7 Using the number buttons to change audio inputs To select a device, press the number button (1-6) that corresponds to the device you want to operate (CD, TAPE, TUNER, TV, or VIDEO). Using the function buttons to change audio devices To select a device, press the FUNCTION button until the input you...
Page 8 - Surround Sound Feature
8 The surround sound feature may be turned ON/ OFF by pressing the SURR ON•OFF button. Surround Sound Feature 1. Press the SURR MODE button until the desired mode is found. 2. Press DELAY+ or DELAY- to achieve the desired delay affect. 3. Press the DSP ON•OFF button to turn DSP (Digital Sound Proces...
Page 9 - Direct Code Entry
9 Write your codes down here for easy reference later. Direct Code Entry 1. Press and hold the CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button. 2. Press and release the desired device button ( TV , VCR , etc.). The red indicator blinks, then stays lit. 3. Ent...
Page 10 - Code Search
10 Code Search If your device does not respond after you have tried all the codes for your brand, or if your brand is not listed, try searching for your code by following these steps. 1. Manually turn on the device ( TV , VCR , etc.) to be controlled. 2. Press and hold the CODE SEARCH button until t...
Page 11 - four
11 Using Your Remote Code Identification The Code Identification Feature allows you to identify the four digit library code stored under your device button. For example, if you want to find out what four digit code is stored under your TV device button, follow the six steps below: 1. Press and hold ...
Page 12 - Sleep Function; Leave the Remote pointing towards the TV
12 Using Your Remote, cont. Sleep Function The Sleep button enables the remote to turn off your TV after a period of 1 to 99 minutes as shown below. The remote must be in TV mode to set a Sleep Timer. This feature works even if your TV does not have a sleep feature. 1. Press and release the TV devic...
Page 13 - TV
13 Using Your Remote, cont. Controlling Devices with Separate Power On and Off Buttons Some GE, RCA and ProScan models require you to press the device button for more than one second to turn the device on and the ON•OFF button to turn the device off. Controlling Combo Devices Some Combo devices (e.g...
Page 14 - Through; Setting ALL Volume/Mute Control to
14 Volume/Mute Control and Punch- Through This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set for all device Modes to use their own Volume/Mute control if present. If the programmed code has no Volume/Mute operation of its own then those butto...
Page 16 - Troubleshooting
16 Remote does not operate your product. • Press the device button of the product you want to control. • Program the remote with a new code. • Install new batteries. (You might have to reprogram your remote after installing new batteries.) • Remote may not be compatible with your product. Remote doe...
Page 17 - 0 Day Limited Warranty
17 Jasco Products Company warrants this product to be free from manufacturing defects for a period of ninety days from the original date of consumer purchase. This warranty is limited to the repair or replacement of this product only and does not extend to consequential or incidental damage to other...
Page 18 - Universal Remote
Jasco Products Company 311 N.W. 122nd Oklahoma City, OK 73114 Made in China RM24970- Universal Remote Instruction Manual RM24970
