Jasco AV93299 - Manual

Jasco AV93299

Jasco AV93299 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
Page: / 7

Table of Contents:

  • Page 2 – INTRODUCTION; The FCC Wants You to Know; different electrical circuit from the receiver; CAUTION; RISK OF ELECTRIC SHOCK.
  • Page 3 – CONNECTIONS; REQUIRED PARTS; Note to the CATV System Installer:
  • Page 4 – OPERATION; Turn on the TV and set it to either Channel 3 or 4.
  • Page 5 – SPECIFICATIONS; Set the RF Modulator’s CHANNEL 3/4 switch to the; CARE; • Use and store the modulator only in normal temperature
  • Page 6 – 0 DAY LIMITED WARRANTY:; FCC Compliance Statement; (3) Connect the equipment into an outlet on a circuit
  • Page 7 – Distributed for Thomson Consumer Electronics, Inc.
Loading the manual

Video Converter

(RF Modulator)

AV93299

INSTRUCTION MANUAL

Please read before using this equipment.

RF Modulator Book 9/17/03 1:28 PM Page 1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - INTRODUCTION; The FCC Wants You to Know; different electrical circuit from the receiver; CAUTION; RISK OF ELECTRIC SHOCK.

3 INTRODUCTION Your Video Converter (RF Modulator) is designed to convertthe separate audio and video signals (from a DVD, videocamera, or video game, for example) into VHF TV signalsthat you can view on a TV set equipped with only a 75 Ohm(F-type) input. The FCC Wants You to Know This device compli...

Page 3 - CONNECTIONS; REQUIRED PARTS; Note to the CATV System Installer:

5 CONNECTIONS Follow these steps to connect your RF Modulator. 1. If your video source is stereo, plug the connectors on one end of a stereo A/V cable into the video and audio input jacks on the RF Modulator. Plug the connectors on the cable’s other end into to video and audio output jacks on the vi...

Page 4 - OPERATION; Turn on the TV and set it to either Channel 3 or 4.

7 Note: If your TV has only 300-ohm VHF screw terminals, use a 75-ohm-to-300-ohm matching transformer to complete the connection. 2. Plug the RF Modulator’s power cord into a standard AC outlet. OPERATION 1. Turn on the TV and set it to either Channel 3 or 4. whichever is not used for regular broadc...

Other Jasco Models

All Jasco Other