Jasco 45609 - Manual
Jasco 45609 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – NOT FOR USE WITH MEDICAL OR LIFE SUPPORT EQUIPMENT; Certified
- Page 3 – WARNING; RISK OF FIRE; Controlling Appliances:; Assign Z-Wave controlled appliances to device numbers 10; WIRELESS RANGE
- Page 4 – Things to consider regarding RF range:; • Brick, tile or concrete walls block more of the RF signal than; IMPORTANT NOTE ABOUT 3-WAY CIRCUITS
- Page 5 – INSTALLATION; Single Switch Wiring Schematic
- Page 7 – WARNING - SHOCK HAZARD; ! Warning: Verify power is OFF to switch box before continuing.; UL specifies that the tightening torque for the screws
- Page 9 – Remote Control
- Page 12 – FCC; To comply with the FCC RF exposure compliance; Compliance with IC Rules and Regulations
- Page 13 – SPECIFICATIONS
Z-Wave
®
Certified
Wireless Lighting Control
On/Off Relay Switch
and 3-Way Switch Kit
45609/45614
www.easyzwave.com
Control the On/Off status of
permanently installed lighting,
fans and more!
©2009 Jasco
Made in China
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Introduction Thank you for your purchase of a GE Z-Wave® control device. Z-Wave technology is designed to automate lighting/home control and provide easy remote operation of all your Z-Wave enabled de-vices. The GE Z-Wave product family includes a variety of devices to control lighting in your hom...
3 WARNING RISK OF FIRE RISK OF ELECTRICAL SHOCK RISK OF BURNS Controlling Appliances: Exercise extreme caution when using Z-Wave devices to control appliances. Operation of the Z-Wave device may be in a different room than the controlled appliance, also an uninten-tional activation may occur if the ...
4 Things to consider regarding RF range: • Each wall or obstacle (i.e.: refrigerator, big screen TV, etc.) between the remote or Z-Wave device and the destination device will reduce the maximum range by approximately 25-30%. • Brick, tile or concrete walls block more of the RF signal than walls made...
