Page 2 - MANUFACTURERS WARRANTY; ONE YEAR LIMITED PARTS & LABOR WARRANTY
ALL NEW JACKSON DISHWASHERS ARE WARRANTED TO THE ORIGINAL PURCHASER TO BE FREE FROMDEFECTS IN MATERIAL OR WORKMANSHIP, UNDER NORMAL USE AND OPERATION FOR A PERIOD OF (1) ONEYEAR FROM THE DATE OF PURCHASE, BUT IN NO EVENT TO EXCEED (18) EIGHTEEN MONTHS FROM THE DATEOF SHIPMENT FROM THE FACTORY. Jacks...
Page 5 - ii; NOMENCLATURE FOR THE MODELS COVERED IN THIS MANUAL; through
ii NOMENCLATURE FOR THE MODELS COVERED IN THIS MANUAL Model: Serial No.: Installation Date: Service Rep. Name: Phone No.: Jackson MSC LLC. provides technical support for allof the dishmachines detailed in this manual. Westrongly recommend that you refer to this manualbefore making a call to our tech...
Page 6 - TABLE OF CONTENTS
SECTION DESCRIPTION PAGE I. GENERAL Specifications for the Conserver XL 2 Specifications for the Conserver XL2 Series 3 Dimensions Conserver AXL (Universal Timer) 4 Dimensions Conserver AXL2 (Universal Timer) 5 Dimensions Conserver AXL2-CML (Universal Timer) 6 Dimensions Conserver AXL2-CMR (Universa...
Page 7 - ELECTRICAL DIAGRAMS
TABLE OF CONTENTS iv VI. ELECTRICAL DIAGRAMS Conserver AXL (115 Volt, 60 Hz, Single Phase) 70 Conserver AXL2 (115 Volt, 60 Hz, Single Phase) 71 Conserver AXL2 CML/CMR (115 Volt, 60 Hz, Single Phase) 72 Conserver AXL2 CML/CMR (208-230 Volt, 60 Hz, Single Phase) 73 Conserver AXLS (115 Volt, 60 Hz, Sin...
Page 8 - SPECIFICATION INFORMATION
Page 9 - SECTION 1: SPECIFICATION INFORMATION
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 1: SPECIFICATION INFORMATION CONSERVER XL SPECIFICATIONS PERFORMANCE/CAPABILITIES OPERATING CAPACITY (RACKS/HOUR) RACKS PER HOUR 37 DISHES PER HOUR 925 GLASSES PER HOUR 925 OPERATING CYCLE (SECONDS) WASH TIME...
Page 11 - DIMENSIONS CONSERVER AXL
Conserver XL Series Installation & Operation Manual 7610-002-04-66 Issued: 11-07-2006 Revised: 10-22-2007 SECTION 1: SPECIFICATION INFORMATION DIMENSIONS CONSERVER AXL 4 LEGEND: A - Electrical connectionB - Water inlet 1/2" I.P.SC - Drain connection 2" I.P.S All vertical dimensions are +...
Page 12 - DIMENSIONS CONSERVER AXL2
Conserver XL Series Installation & Operation Manual 7610-002-04-66 Issued: 11-07-2006 Revised: 10-22-2007 SECTION 1: SPECIFICATION INFORMATION DIMENSIONS CONSERVER AXL2 5 LEGEND: A - Electrical connectionB - Water inlet 1/2" I.P.SC - Drain connection 2" I.P.S All vertical dimensions are ...
Page 13 - DIMENSIONS CONSERVER AXL2-CML
LEGEND: A - Electrical connectionB - Water inlet 1/2" I.P.SC - Drain connection 2" I.P.S All vertical dimensions are +/- 1/2" from floordue to adjustable bullet feet. C B 78 [1981mm] 65 14 [1658mm] 13 [330mm] 44 [1118mm] 25 [635mm] 4 [102mm] 13 14 [337mm] 11 12 [295mm] A B Conserver XL S...
Page 14 - RDIMENSIONS CONSERVER AXL2-CMR
LEGEND: A - Electrical connectionB - Water inlet 1/2" I.P.SC - Drain connection 2" I.P.S All vertical dimensions are +/- 1/2" from floordue to adjustable bullet feet. 78 [1981mm] 13 [330mm] C B 65 1 4 [1658mm] 44 [1118mm] [635mm] 4 [102mm] B A 13 1 4 [337mm] 11 1 2 [295mm] 68 1/2 [1740mm...
Page 16 - DIMENSIONS CONSERVER XL2
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 1: SPECIFICATION INFORMATION DIMENSIONS CONSERVER XL2 9 00000000 2 LEG E N D A - ELEC TR IC AL C O N N ECTI O N B - WATER I N LET, 3/ 4" I P S C - DR AI N CO NN EC TI O N , 2 " I P S ALL DI M E NSI O ...
Page 17 - DIMENSIONS CONSERVER XL2-CML
LEGEND A - ELECTRICAL CONNECTION B - WATER INLET, 3/4" IPSC - DRAIN CONNECTION, 2" IPS ALL DIMENSIONS ARE +/- 1/2" FROM FLOOR DUE TO ADJUSTABLE BULLET FEET. 20 34 [527mm] 26 [662mm] 32 [814mm] 4 [101mm] 20 34 [526mm] 44 [1115mm] A B 11 34 [296mm] 1mm] 46 14 [1176mm] 00000000 75 34 [1921m...
Page 18 - DIMENSIONS CONSERVER XL2-CMR
20 34 [527mm] 26 [662mm] 32 [814mm] 4 [101mm] 48 1 2 [1232mm] 44 1 2 [1130mm] 11 34 [296mm] 4 [101mm 20 34 [526mm] B 34 [863mm] 13 [328mm] 75 34 [1925mm] 60 12 [1536mm] 1 [24mm] 4 12 [112mm] A B C Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 1: SPECIFIC...
Page 19 - XLS BOWL OPTION
5 14 [134mm] 12 [13mm] 18 [459mm] 21 1 2 [545mm] 8 [202mm] 5 [128mm] A B A - Electrical Connection B - Water Connection, 1 4 " Legend Bowl Option - Right Side View Bowl Option - Front Side View Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 1: SPECIFI...
Page 20 - TABLE DIMENSIONS
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 1: SPECIFICATION INFORMATION TABLE DIMENSIONS 13 TABLE DIMENSIONS CORNER INSTALLATION TABLE DIMENSIONS CONNECTION TO DISHMACHINE TABLE DIMENSIONS STRAIGHT THROUGH INSTALLATION 20 1/2” (521mm) OPENING 25 1/4” ...
Page 22 - SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS; PSI “flow” pressure at the recommended temperature indi-
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS INSTALLATION INSTRUCTIONS 15 VISUAL INSPECTION: Before installing the unit, check the container and machine for damage. A damaged container is an indi- cator that there ...
Page 23 - ELECTRICAL INSTRUCTIONS
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS ELECTRICAL INSTRUCTIONS 16 ELECTRICAL POWER CONNECTION: Electrical and grounding connections must comply with the applicable portions of the National Electrical Code ANS...
Page 25 - OPERATION INSTRUCTIONS; The sump strainer is in place and is clean.; FILLING THE WASH TUB:
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS OPERATION INSTRUCTIONS 18 PREPARATION: Before proceeding with the start-up of the unit, verify the following: 1. The sump strainer is in place and is clean. 2. The drain...
Page 26 - WASHING A RACK OF WARE:
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS OPERATION INSTRUCTIONS (CONTINUED) 19 WASHING A RACK OF WARE: To wash a rack, open the doors completely (being careful for hot water that may drip from the doors) and sl...
Page 27 - CAM TIMER OPERATION; CAM 2: Cam 2 is a cut cam and provides the wash cycle timing.
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS CAM TIMER OPERATION The Conserver XL Series cam timer is a 1 minute, 30 second, 8-cam timer (cam 8 is a spare) that controls the operation of thedishmachine. The followi...
Page 28 - CAM 6: Cam 6 is an adjustable can and controls the detergent pump.
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS CAM TIMER OPERATION (CONTINUED) 21 CAM 6: Cam 6 is an adjustable can and controls the detergent pump. FUNCTION: The detergent pump cam works off the normally closed cont...
Page 30 - UNIVERSAL TIMER PROGRAMMING INSTRUCTIONS; The PROGRAM light will illuminate and the A light will blink.
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS UNIVERSAL TIMER PROGRAMMING INSTRUCTIONS 23 INSTRUCTIONS FOR CHEMICAL FEEDER PUMPS (FOR INSTALLATION TECHNICIAN ONLY) To access the programming mode, the machine must be...
Page 31 - UNIVERSAL TIMER PROGRAMMING INSTRUCTIONS (CONTINUED); MOVE; Timer Programming Board
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS UNIVERSAL TIMER PROGRAMMING INSTRUCTIONS (CONTINUED) 24 MOVE ENTER PGM AB CD E F G H ACCEPT 8.04.02.01.00.80.40.20.1 DRAIN FILL SANITIZER DETERGENT RINSE AID Time in sec...
Page 32 - PREVENTATIVE MAINTENANCE
Page 33 - SECTION 3: PREVENTATIVE MAINTENANCE
The dishmachines covered in this manual are designed to operate with a minimum of interaction with the operator. However,this does not mean that some items will not wear out in time. Jackson highly recommends that any maintenance and repairsnot specifically discussed in this manual should be perform...
Page 34 - TROUBLESHOOTING SECTION
Page 35 - SECTION 4: TROUBLESHOOTING; Exercise extreme caution at all times.; If test points are not easily accessible, disconnect power, attach
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 4: TROUBLESHOOTING COMMON PROBLEMS (DOMESTIC UNITS) 28 WARNING: Inspection, testing and repair of electrical equipment should be performed only by qualified service per- sonnel. Certain procedures in this sec...
Page 36 - Problem: Machine fills continuously, only when the power is on.
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 4: TROUBLESHOOTING COMMON PROBLEMS (DOMESTIC UNITS) 29 Problem: Machine will not fill, other functions work. 1. Y-strainer plugged. Clean strainer.2. Water valve(s) turned off. Turn on water valves.3. Faulty ...
Page 37 - Problem: Machine keeps tripping the service breaker.
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 4: TROUBLESHOOTING COMMON PROBLEMS (DOMESTIC UNITS) 30 Problem: Machine runs with door open. 1. Door switch shorted. With machine off, open doors, and with both wires to door switch unplugged, measure continu...
Page 38 - Problem: Prime switch does not activate sanitizer pump.
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 4: TROUBLESHOOTING COMMON PROBLEMS (DOMESTIC UNITS) 31 Problem: Prime switch does not activate sanitizer pump. 1. Faulty prime switch. With the prime switch in the prime position, check for voltage between th...
Page 43 - PARTS SECTION
Page 44 - SECTION 5: PARTS SECTION; CONTROL BOX ASSEMBLIES - UNIVERSAL TIMER
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION CONTROL BOX ASSEMBLIES - UNIVERSAL TIMER 37 29 28 30 2 1 9 31 32 20 18, 19 16, 17 15 18, 19 1 24 22 21 22 37 24 33, 34 25,26,27 23 35 36 6 5 7 8 3 4 14 13 11, 12 10 9
Page 46 - CONTROL BOX ASSEMBLIES - MECHANICAL TIMER; Conserver XL2 Series Control Box Assembly; ITEM; Control Box Weldment, Conserver XL
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION CONTROL BOX ASSEMBLIES - MECHANICAL TIMER 39 20 21 22 23 19 18 24 25 25 7, 29 1 3 14 4 6 5 17 16 15 10 8a 7, 29 8 9 13 12 11 27, 28 2 Conserver XL2 Series Control Box Assembly Conserver XL Co...
Page 50 - MECHANICAL 8 CAM TIMER; Timer Motor
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION MECHANICAL 8 CAM TIMER 43 CYCLE/ RESET WASH DRAIN FILL SANITIZER DETERGENT RINSE AID SPARECAM MicroswitchQty. 805930-01-65-81 Timer Motor 05945-306-14-00
Page 51 - CHEMICAL FEEDER PUMP ASSEMBLY
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION CHEMICAL FEEDER PUMP ASSEMBLY 44 Screw, 6-32 x 3/4” Phillips Pan Head 4 per 05305-011-37-05 Roller, Red (Detergent/Sanitizer) 04320-111-36-70 Roller, White (Rinse Aid) 04320-002-82-28 If usin...
Page 52 - HOOD ASSEMBLY
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION HOOD ASSEMBLY 45 1 15 14 13 12, 6 10,11, 6 9, 6 7, 4, 6 3, 4, 5 16 6 2 8 4 6 Conserver XL Hood Weldment ITEM QTY DESCRIPTION Mfg. No. 1 1 Hood Weldment, Conserver AXL 05700-003-22-05 1 1 Hood...
Page 53 - CONSERVER XL2 HOOD ASSEMBLY
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION CONSERVER XL2 HOOD ASSEMBLY 46 ITEM QTY DESCRIPTION Mfg. No. 1 1 Hood Weldment, Conserver XL2 - Old Style 05700-002-21-67 1 1 Hood Weldment, Conserver XL2 - New Style 05700-002-60-76 1 1 Hood...
Page 56 - CONSERVER XL2 CANTILEVER ARM ASSEMBLY (SINGLE BRACKET MOUNT); U Bracket Assembly; OLD STYLE CANTILEVER ARM ASSEMBLY
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION CONSERVER XL2 CANTILEVER ARM ASSEMBLY (SINGLE BRACKET MOUNT) 49 ITEM QTY DESCRIPTION Mfg. No. 1 1 Hex Nut, 1/4"-20 with Nylon Insert, S/S 05310-374-01-00 2 1 Wear Strip UHMW 05700-011-34-...
Page 58 - CONSERVER XL2 TUB ASSEMBLY (LEFT FRONT VIEW)
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION CONSERVER XL2 TUB ASSEMBLY (LEFT FRONT VIEW) 51 ITEM QTY DESCRIPTION Mfg. No. 1 2 Lower Wash Manifold Weldment 05700-031-46-00 2 2 Casting, Manifold Wedge 09515-011-46-61 3 4 Manifold Gasket ...
Page 59 - CONSERVER XL2 SERIES TUB ASSEMBLY (RIGHT FRONT VIEW)
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION CONSERVER XL2 SERIES TUB ASSEMBLY (RIGHT FRONT VIEW) 52 * Represents an item not shown. ITEM QTY DESCRIPTION Mfg. No. 1 7 Locknut, 10-24 S/S Hex with Nylon Insert 05310-373-01-00 2 1 Drain So...
Page 60 - CONSERVER XL2 SERIES FRAME WELDMENT & ACCUMULATOR
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION CONSERVER XL2 SERIES FRAME WELDMENT & ACCUMULATOR Bullet Foot 05340-108-01-03 Frame Weldment, Single Bracket 05700-031-45-16 Frame Weldment, Double Bracket 05700-002-61-22 53 Accumulator ...
Page 61 - INCOMING PLUMBING ASSEMBLIES; Elbow; Conserver AXL Incoming
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION INCOMING PLUMBING ASSEMBLIES 54 ITEM QTY DESCRIPTION Mfg. No. 1 1 3/4" NPT, Solenoid Valve, 120 Volt 04810-100-53-00 1 1 3/4" NPT, Solenoid Valve, 240 Volt (Conserver XL Export Only) ...
Page 62 - /4” SOLENOID VALVE & 3/4” NPT VACUUM BREAKER REPAIR PARTS KITS
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION 3/4” SOLENOID VALVE & 3/4” NPT VACUUM BREAKER REPAIR PARTS KITS 55 Screw Data Plate Coil & Housing Valve Bonnet Spring06401-003-07-40 Plunger06401-003-07-40 O-Ring06401-003-07-42 Diap...
Page 63 - CONSERVER XL WASH MOTOR ASSEMBLY; Motor Assembly, 50 HZ
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION CONSERVER XL WASH MOTOR ASSEMBLY 56 ITEM QTY DESCRIPTION Mfg. No. 1 1 Pump & Motor Assembly, 50 HZ 06105-002-19-87 1 Pump Assembly, 50 HZ 05700-002-85-38 1 Motor Assembly, 50 HZ 06105-002...
Page 64 - MOTOR & PUMP ASSEMBLY; Impeller Assembly, 60HZ; Other parts not shown.; Pump Only Assembly, 60HZ
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION MOTOR & PUMP ASSEMBLY 57 Impeller Assembly, 60HZ 05700-002-81-86 Impeller Assembly, 50HZ 05700-002-41-49 Mechanical Seal, 60HZ05330-002-34-22 Seal, 50HZ05330-002-06-21 Other parts not sho...
Page 65 - WASH MANIFOLD ASSEMBLY
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION WASH MANIFOLD ASSEMBLY 58 Gasket, Wash Manifold 2 per assembly 05700-111-35-03 Casting, Manifold Wedge 09515-011-46-61 Conserver XLWeldment, Lower Wash Manifold05700-002-05-87 Conserver XL2 S...
Page 66 - DRAIN SOLENOID ASSEMBLY; Cover, Solenoid Weldment
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION DRAIN SOLENOID ASSEMBLY 59 ITEM QTY DESCRIPTION Mfg. No. 1 1 Solenoid Bracket Weldment, Conserver XL (Prior to S/N 04D10286) 05700-002-05-91 1 1 Solenoid Housing Weldment, Conserver XL (Start...
Page 67 - MISCELLANEOUS PARTS
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION MISCELLANEOUS PARTS 60 Conserver XL2 Intake Pump Strainer Weldment 05700-031-45-26 Stand Pipe Assembly 05700-031-35-55 Conserver XL2 Rack Guide Weldment 05700-031-45-92 Conserver XL Rack Guid...
Page 68 - CML ASSEMBLY OPTIONS; YOKE ASSEMBLY
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION CML ASSEMBLY OPTIONS 61 1 *2 *10 6 00000000 9 12 21 22 23 24 25 A 11 7 20 10 3 B 17 15 18 16 14 13 4 5 B A 8 26 27 28 29 YOKE ASSEMBLY 19
Page 70 - CMR ASSEMBLY OPTIONS
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION CMR ASSEMBLY OPTIONS 63 1 17 3 19 25 24 9 20 21 22 A 18 5 *4 *4 23 2 B 14 12 15 13 11 10 6 7 B A 8 26 27 28 29 16 YOKE ASSEMBLY
Page 75 - FALSE PANEL INSTALLATION; Bottom of side panel.; False panel positioned in unit.; False Panel Weldment
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 5: PARTS SECTION 68 FALSE PANEL INSTALLATION 1. Loosen the rack assembly from the unit.2. False panel will mount to the rack; inside the dishmachine.3. Position panel in unit on side to be closed.4. Hold pane...
Page 76 - ELECTRICAL SCHEMATICS
Page 77 - SECTION 6: ELECTRICAL SCHEMATICS; CONSERVER AXL 115 VOLT - 60 HERTZ - SINGLE PHASE
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 6: ELECTRICAL SCHEMATICS CONSERVER AXL 115 VOLT - 60 HERTZ - SINGLE PHASE 70
Page 78 - CONSERVER AXL2 115 VOLT - 60 HERTZ - SINGLE PHASE
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 6: ELECTRICAL SCHEMATICS CONSERVER AXL2 115 VOLT - 60 HERTZ - SINGLE PHASE 71
Page 81 - CONSERVER AXLS 115 VOLT - 60 HERTZ - SINGLE PHASE
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 6: ELECTRICAL SCHEMATICS CONSERVER AXLS 115 VOLT - 60 HERTZ - SINGLE PHASE 74
Page 82 - CONSERVER AXLS2 115 VOLT - 60 HERTZ - SINGLE PHASE
Conserver XL Series Technical Manual 7610-002-10-23 Issued: 11-28-2007 Revised: N/A SECTION 6: ELECTRICAL SCHEMATICS CONSERVER AXLS2 115 VOLT - 60 HERTZ - SINGLE PHASE 75
Page 88 - SECTION 7: JACKSON MAINTENANCE & REPAIR CENTERS; ALABAMA TO FLORIDA
ALABAMA JONES-McLEOD APPLIANCESVC 1616 7TH AVE. NORTHBIRMINGHAM, AL 35203(205) 251-0159800-821-1150FAX: (205) [email protected] JONES-McLEOD APPLIANCESVC 854 LAKESIDE DRIVEMOBILE, AL 36693(251) 666-7278800-237-9859FAX: (251) 661-0223 ALASKA RESTAURANT APPLIANCESERVICE 7219 ROOSEVELT W...
Page 89 - FLORIDA TO MARYLAND
JONES-McLEOD APPLIANCESVC 854 LAKESIDE DRIVEMOBILE, AL 36693(251) 666-7278800-237-9859FAX: (251) [email protected] NASS PARTS AND SERVICE,INC. 1108 SOUTH WOODS AVENUEORLANDO, FL 32805(407) 425-2681(800) 432-2795(407) 425-3463 FAX NASS PARTS AND SERVICE,INC. 1376 HEIDE AVENUEPALM BAY, ...
Page 90 - MARYLAND TO NEW YORK
EMR SERVICE DIVISION 106 WILLIAMSPORT CIRCLESALISBURY, MD 21804(410) 543-8197888-687-8080FAX: (410) [email protected] EMR SERVICE DIVISION 5316 Sunnyside Ave.Beltsville, MD 20715(301) 931-7000800-348-2365FAX: (301) [email protected] GCS SERVICE INC. SILVER SPRING, MD (301) 585-75...
Page 91 - NEW YORK TO PENNSYLVANIA
B.E.S.T. INC. 3003 GENESEE STREETBUFFALO, NY 14225(716) 893-6464800-338-5011FAX: (716) [email protected] DUFFY'S EQUIPMENT SVC. 3138 ONEIDA STREETSAUQUOIT, NY 13456(315) 737-9401800-443-8339FAX: (315) [email protected] NORTHERN PARTS & SVC. 21 NORTHERN AVENUEPLATTSBURGH, NY 12903...
Page 92 - RHODE ISLAND TO WISCONSIN
RHODE ISLAND GCS SERVICE INC. EAST PROVIDENCE, RI (401) 434-6803800-462-6012FAX: (401) 438-9400 SUPERIOR KITCHEN SER-VICE INC. 669 ELMWOOD AVENUEPROVIDENCE, RI 02907(888) 590-1899(401) 781-1996 FAX SOUTH CAROLINA AUTHORIZED APPLIANCESERVICECENTER 1811 TAYLOR ST. COLUMBIA, SC 29202 (803) 254-8414 FAX...
Page 93 - WISCONSIN TO WYOMING/INTERNATIONAL
GENERAL PARTS, INC. W223 N735 SARATOGA DRIVEWAUKESHA, WI 53186(262) 650-6666(800) 279-9946(262) 650-6660 FAX WYOMING HAWKINS COMMERCIALAPPLIANCE SERVICE 3000 S. WYANDOT ST.ENGLEWOOD, CO 80110(303) 781-5548(800) 624-2117FAX: (303) [email protected] METRO APPLIANCE SERVICE 1640 S BRO...
