Jackson Rinse Regulating Thermostat Replacement - Manual
Jackson Rinse Regulating Thermostat Replacement – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warning: many of the instructions and steps within; PREPARATION
- Page 4 – AFTER MAINTENANCE ACTIONS; Once the new thermostat is installed, it will be necesary to
- Page 5 – on the machine data plate for every cycle.; SPECIAL NOTES; Work performed on Jackson dishmachines by unautho -; SPECIAL PARTS; jumper wires and instructions.; CONTACT INFORMATION; Jackson MSC Inc. provides technical support for all of the
Rinse Regulating
Thermostat
Replacement
(From EGO brand to Stemco)
07610-003-13-91 A
November 16, 2005
Dishmachine Maintenance Instructions
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Many dishmachines comes with integral booster tanks to ensure proper temperature of the final rinse. Jackson has predom-inantly used two manufacturers of thermostats, EGO and Stemco.These instructions are for use with kit 06401-003-13-94, which isto replace an EGO rinse regulating thermostat with a ...
www.jacksonmsc.com Rinse RegulatingThermostat Replacement Instructions Revision A (11/16/2005) 4 8. Use the 7/16” combination wrench to tighten down the brass fit-ting, while also positioning the new thermostat so that it does nothang over the heater. 9. Note: regardless of the unit this is being do...
on the machine data plate for every cycle. SPECIAL NOTES Work performed on Jackson dishmachines by unautho - rized or unqualified personnel may void the warranty. Before begin -ning this or any other maintenance evolution on a unit under war-ranty, you should contact a certified Jackson technician o...
