Jackson Drive Motor & Gear Reducer - Manual
Jackson Drive Motor & Gear Reducer – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Warning: many of the instructions and steps within; PREPARATION
- Page 3 – you need to
- Page 6 – Reattach the bottom and top assembly covers.; AFTER MAINTENANCE ACTIONS; Reconnect the incoming water (if disconnected) and turn; SPECIAL NOTES; Work performed on Jackson dishmachines by unautho -; SPECIAL PARTS; Jackson MSC Inc. provides technical support for all of the
Drive Motor & Gear
Reducer Replacement
07610-003-08-78 A
July 5, 2005
Rack Conveyor Dishmachine
Maintenance Instructions
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
The drive motor and the gear reducer of your Jackson rack conveyor are responsible for moving racks of ware throughthe dishmachine. If needed to be replaced, these instructions willshow you how to get your machine up and running in the shortestpossible time. Jackson offers all of the repair parts ne...
4. Remove the bottom and set to the side so that it does notbecome a trip hazard. 5. With the cover removed you may now remove the bolts used toconnect the drive motor to the gear reducer. Note: you need to support the motor as you remove the bolts; failure to do so couldresult in the motor falling ...
www.jacksonmsc.com Rack Conveyor Drive Motor and Gear Reducer Replacement Instructions Revision A (07/05/2005) 6 30. Once the motor is securely fastened to the gear reducer, care-fully lift the assembly up and mount it on the fasteners. Be sure touse proper lifting techniques to prevent injury. 31. ...
