Itechworld JS80 - User Manual

The JS80 has been designed and developed in Perth, Australia andutilizes an ultra-safe design which prevents any errors occurring. Withno less than seven safety features, including spark-proof technologyand reverse polarity protection, the JS80 is the smart, secure, andstraightforward way to start a...

Locate the "12V OUT" section on the JS80 and open the orangerubber flap.Insert the Heavy Duty clamps into the "12V OUT" section asper the image below.Ensure that the vehicle's power loads are all off. Headlights,radio, air conditioning and any other load.Connect the Heavy Duty clamps...

Locate the PD port on the JS80 and open the orange rubberflap.Take the USBC to USBC cable and insert one end into the PDPort of the JS80.Insert the other end of the USBC to USBC cable to the PD Porton the 18w 240V charger (wall charger).Insert the 18w 240V charger (wall charger) into a 240V mainspow...

The JS80 has energy saving modes which will activate if certaincriteria is reached. If either of the USB ports have a load of lessthan < 80mA after 30 seconds the power button's light will turnoff but the output will be on. To turn the JS80 off completely,press and hold the power button. If the 1...

The JS80 has two quick charge USB ports. To use the USB ports,the JS80 must be switched "on" via the power button. Locate theUSB ports on the JS80 and open the orange rubber flap. Plug inthe device to the USB ports to use. JS80 USB USB PORTS POWER BUTTON

The JS80's PD port can also be used as an output to power USBCdevices. The JS80 supports PD60W output 5V3A, 9V3A, 12V3A,15V3A, 20V3A. To use the USBC PD port, the JS80 must beswitched "on" via the power button. Locate the USBC PD port onthe JS80 and open the orange rubber flap. Plug in the d...

The JS80 is great as a portable power supply, all ports can be usedsimultaneously as outputs. Charge and run multiple devices all at thesame time. See the info-graph below to show how many times you can chargepopular items with the JS80. JS80 RUNNING DEVICES

The JS80 has a 500 Lumen tactical torch inbuilt. To use the tacticaltorch, the JS80 must be switched "on" via the power button. Nowpress the torch button. The torch will illuminate. To turn the torchoff press the torch button again. JS80 TACTICAL TORCH TORCH BUTTON POWER BUTTON TACTICAL TORC...

Peak current: 3000AOptimum operating temperature: -20c to +50cOptimum charging temperature: 0c to +40cOptimum storage temperature: -20c to +50cPD input/output: MAX60W 5V3A 9V3A 12V3A 15V3A 20V3AUSB output: MAX18W 5VA3A 9V2A 12V1.5ADC output: 12V 10AShell protection: IP65 with ports closedCooling: Na...

Input high voltage: Red light onInput low voltage: Red light onReverse polarity protection: Red light on and buzzer (short intervals)Reverse charging protection: Red light on and buzzer (slow & short)Short circuit protection: Red light on and buzzer (1 long 2 short)High temperature protection: R...

iTechworld281 Great Eastern HWYBurswood WA 6100 1300 483 249 www.itechworld.com.au [email protected] JS80 CONTACT