Invacare Transport Ready Option - Manual
Invacare Transport Ready Option – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Attach WTORS to securement points in accordance
with the manufacturer’
s instructions and SAE J2249
This wheelchair is to be used only with WTORS that
have been installed in accordance with the
manufacturer’
s instructions and SAE J2249.
Attach wheelchair occupant restraints in accordance
with the manufacturer’
s instructions and SAE J2249.
Correct positioning of occupant restraint belt(s) are
shown in FIGURE 2.
1.
The pelvic belt should be worn low across the front
of the pelvis, so that the angle of the pelvic belt is
within the preferred zone of 45 to 75 degrees to
the horizontal, or the optional zone of 30 to 45 de-
grees to the horizontal, as shown in FIGURE 2.
WARNING
IF YOUR WHEELCHAIR IS
NOT
EQUIPPED WITH THE TRANSPORT READY OPTION:
DO NOT let anyone occupy a wheelchair while in a moving Motor Vehicle.
Occupant MUST be moved to an approved Motor Vehicle seat.
Wheelchair positioning strap(s) are NOT intended to prevent an occupant from being thrown
from a wheelchair as a result of a sudden stop and/or collision during travel in a Motor Vehicle.
DO NOT transport a wheelchair in the front seat of a Motor Vehicle.
While transporting a wheelchair in a Motor Vehicle secure it to prevent rolling and/or shifting.
INSTRUCTIONS
This wheelchair conforms with the requirements of the
ANSI/RESNA WC/Vol.1- Section 19.5.3 (Frontal Im-
pact Test).
WARNING
When feasible, wheelchair occupants should
transfer to the vehicle seat and use the OEM
vehicle installed restraint system.
Wheelchair occupants MUST NOT weigh
more than 150 lbs./68 kg.
This wheelchair MUST be in a forward facing
position during travel in a Motor Vehicle.
The location of the wheelchair securement points are
shown in FIGURE 1.
Securement Points
FIGURE 1 - SECUREMENT POINTS
NOTE: To obtain a copy of SAE J2249 Wheelchair
Tie-down and Occupant Restraint Systems
(WTORS) for use in Motor Vehicles, please contact:
SAE International, 400 Commonwealth Drive,
W arrendale, PA 15096, (412) 776-4970.
FIGURE 2 - ZONES OF PREFERRED AND
OPTIONAL ANGLES FOR PELVIC BELT
!
!
Transport Ready Option
Instruction and Warning Sheet
Allegro®, Orbit™, and Storm® Jr. Wheelchairs ONLY
45
o
30
o
Preferred Zone
Optional Zone
75
o
Side View
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
