Invacare DBA - Manual
Invacare DBA – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WA R N I N G; MAINTENANCE
- Page 3 – UNITED KINGDOM LIMITED WARRANTY
- Page 4 – UNITED STATES LIMITED WARRANTY
- Page 5 – Einstellbare Befestigungsklammern; SICHERHEIT - ZUSAMMENFASSUNG; WA R N U N G; PRODUKTBESCHREIBUNG; DROP BASE; Aufbau, Installations- und Bedienungsanleitung
- Page 6 – WARTUNG; ABBILDUNG 1 - MONTAGE
- Page 7 – HINWEIS ZUR GARANTIE
- Page 8 – Verstelbare Bevestigingsklemmen; KORTE VEILIGHEIDSINLEIDING; WA A R S C H U W I N G; PRODUCTBESCHRIJVING
- Page 9 – ONDERHOUD; FIGUUR 1 - CONSTRUCTIE
- Page 10 – BEPERKTE GARANTIE
- Page 11 – SECURITE; MISES EN GARDE; Veiller à ce que la visserie soit toujours serrée.; DESCRIPTION DU PRODUIT; Fixations De Montage Réglables; MISE EN GARDE
- Page 12 – ENTRETIEN
- Page 13 – GARANTIE LIMITEE
- Page 14 – Clips De Fijación Ajustables; SUMARIO DE MEDIDAS DE; A D V E R T E N C I A; DESCRIPCIÓN DEL PRODUCTO; BASE RIGIDA PARA CHASIS; miento
- Page 15 – MANTENIMIENTO
- Page 16 – GARANTÍA LIMITADA
- Page 17 – Ganci Di Montaggio Regolabili; AVVERTIMENTO; RIASSUNTO MISURE DI SICUREZZA; AV V E R T I M E N T O; DESCRIZIONE DEL PRODOTTO; Istruzioni per l'assemblaggio, l’installazione e l’uso
- Page 18 – MANUTENZIONE; FIGURA 1 - ASSEMBLAGGIO
- Page 19 – GARANZIA LIMITATA
- Page 20 – Grampos Reguláveis; PRECAUÇÕES; AV I S O; DESCRIÇÃO DO PRODUTO; BASE DE APOIO-DROP BASE
- Page 21 – MANUTENÇÃO
- Page 22 – GARANTIA LIMITADA
- Page 23 – Justerbara Fästklämmor; SÄKERHETSFÖRESKRIFTER; VA R N I N G; BESKRIVNING; FLEXPLATTA; Montering, bruks och skötselanvisning
- Page 24 – SKÖTSELRÅD
- Page 25 – GARANTI
- Page 26 – Justerbar Monterings Klemmer; ADVARSEL; FASTGØRELSESPUNKT DROPSEDE; SIKKERHEDS RESUMÉ; A D VA R S E L; PRODUKT BESKRIVELSE
- Page 27 – VEDLIGEHOLDELSE
- Page 28 – BEGRÆNSET GARANTI
- Page 29 – Säädettävät Kiinityskoukut; YHTEENVETO TURVAOHJEISTA; VA R O I T U S; TUOTEKUVAUS; KORKEUSSÄÄDETTÄVÄ
- Page 30 – HUOLTO
- Page 31 – TAKUU
1
Drop base mounting clips come in two (2) diameters,
7/8-inch (22mm) and 1-inch (25mm). These allow the
base to interface with wheelchairs that have different
seat rail diameters.
ASSEMBLY (FIGURE 1)
Remove the Drop Base, mounting clips and L-shaped
brackets from the packaged container.
NOTE: The mounting clips can be positioned upward or
downward depending on the amount of drop required.
Adjustable Mounting Clips
1. Attach the L-shaped brackets to the mounting clips
using the hardware provided.
2. Use nuts and bolts provided and attach mounting clips/
L-shaped bracket to Drop Base plate.
3. Place the Drop Base between the wheelchair seat
rails with the cut-out of the Drop Base positioned over
the crossbraces of the chair. Snap the Drop Base
into place.
NOTE: The amount of drop available on each wheelchair
varies depending on style of wheelchair (Hemi-height ver-
sus Standard height). On some wheelchairs, the
crossframe may hit the Drop Base preventing maximum
drop.
WA R N I N G
Always test to see that the drop base is
properly and securely locked in place
before using.
Make certain ALL screws and nuts are
tight at all times.
NOTE: Check all parts for shipping damage. In case of
shipping damage, DO NOT use. Contact equipment sup-
plier for further instruction.
SAFETY SUMMARY
WA R N I N G
DO NOT use this equipment without first
reading and understanding these instruc-
tions. If you are unable to understand the
Warnings, Cautions, and Instructions, con-
tact equipment supplier before attempt-
ing to use this equipment, otherwise, in-
jury or damage may result.
The best way to avoid problems related
to pressure sores is to understand their
causes and your role in a skin manage-
ment program.
Your therapist and physician should be
consulted if you have any questions re-
garding weight relief, self-examination of
the skin, or individual limitations and
n e e d s .
Skin condition should be checked very
frequently after the provision of any new
cushion.
Make sure that ALL hardware are tight at
ALL times.
PRODUCT DESCRIPTION
The Drop Base is designed to provide stable base of
support for the individual who uses a seat cushion in
the wheelchair. Using the Drop Base on certain chairs
may allow the seat cushion to be recessed up to three
(3) inches (7.5 cm). The angle of the Drop Base can
be changed using the adjustable mounting clips. The
Drop Base lowers seat cushion height for improved fit
under tables or desks and improves foot propulsion.
The Drop Base is manufactured with universal
crossbrace cut-outs which allows the Drop Base to fit
most Invacare Manual (Model DBA) and Power
Wheelchairs (Model DBPA).
Adjustable height mounting clips allow for changes of
depth or angle in the field and also can be used for
clinical evaluation.
DROP BASE
Installation, Assembly and Operation Instructions
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 WA R N I N G DO NOT continue to use this product if anysuch problems are discovered. Correctivemaintenance can be per formed at orarranged through your equipment supplier. MAINTENANCE These instructions MUST BE followed: 1. Clean weekly with warm water and mild soap solution. Wipe entire surface w...
3 UNITED KINGDOM LIMITED WARRANTY This warranty is extended only to the original purchaser of our products and does notaffect statutory rights. Invacare UK warrants its product to be free from defects for a period of one (1) year fromthe date of purchase. With regard to the original puchaser/user on...
4 PLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAWAPPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975. This warranty is extended only to the original purchaser/user of our products. This warranty gives you specific legal rights and you may also have other legal rights w...
