Invacare 9871 - Manual
Invacare 9871 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – so as to achieve an even height adjustment. DO NOT use if wobbly or; all attaching; INSTALLING THE SEAT ARM; frame to the end rail.; FIGURE 1 - INSTALLING THE
- Page 3 – ATTACHING THE BACKREST ASSEMBLY; Position transfer bench upside down on a level surface.; FIGURE 2 - ATTACHING THE; ADJUSTING LEG EXTENSIONS; Depress the snap button and slide; FIGURE 3 - ADJUSTING LEG; CLEANING
- Page 4 – LIMITED WARRANTY
1
For more information regarding Invacare products, parts, and services,
please visit www.invacare.com
Transfer Bench
Model Nos. 9871 (Vinyl), 9873 (Urethane Foam), 98070 (Composite)
NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact
Carrier/Invacare for further instructions.
SAFETY SUMMARY
To ensure the safe and proper installation of the Transfer Bench, these instructions
MUST
be followed:
WARNING
DO NOT install this equipment without first reading and understanding this
instruction sheet. If you are unable to understand the warnings, cautions or
instructions, contact a healthcare professional, dealer or technical personnel,
before attempting to install this equipment - otherwise, injury or damage
may occur.
The transfer bench backrest and seat arm MUST be installed BEFORE using
the transfer bench.
DO NOT submerge seat pads in water otherwise damage to seat pads may
result.
Check rubber tips for rips, tears, cracks or wear. If any of these conditions
exist, replace rubber tips immediately.
Users with limited physical capabilities should be supervised or assisted when
using the transfer bench.
Use seat arm ONLY to assist in transfers. DO NOT attempt to use seat arm to assist
in standing in tub as tipping of the transfer bench could result.
SPECIFIC WARNINGS
The weight limitation of transfer bench (Model Nos. 9871, 9873, and 98070)
manufactured after November 1, 1999 is 300 lbs (136.1 kg).
The serial number (Date Code Decal), located on the underside of the seat, is
a 5 (five) digit identification and traceability label detailing the date of
manufacture, and arranged as follows:
X
XXXX
1st digit signifies the last digit of the year.
X
XX
XX
2nd and 3rd digits signify the month.
XXX
XX
4th and 5th digits signify the day.
Example:
91101 = November 1, 1999
Assembly, Installation and Operating Instructions
SAVE THESE INSTRUCTIONS
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Transfer Bench 2 Part No 1075940 SPECIFIC WARNINGS (CONTINUED) Most tub floors are higher than the bathroom floor. Before using, ensure that the two (2) legs of the transfer bench inside the tub are adjusted to the same height and the two (2) legs outside the tub are adjusted to the same height, so ...
Part No 1075940 3 Transfer Bench ATTACHING THE BACKREST ASSEMBLY NOTE: Before performing this procedure, carefully read and understand the Safety Summary of this instruction sheet. 1. Position transfer bench upside down on a level surface. NOTE: The backrest attaches to the end closest to the seat a...
LIMITED WARRANTY NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW APPLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975.This warranty is extended only to the original purchaser/user of our product.This warranty gives you specific legal rights and you may also have other legal ri...
