Invacare 5143B - Manual
Invacare 5143B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Usage; Disassembly; WARNING; bed. Refer to your owner's manual for correct weight limitation.
- Page 3 – and foot springs together.; Attach the Four Inch Extension; Reassemble foot spring to head spring.; This will allow you to disengage head spring from foot spring.
- Page 5 – For beds equipped with AC motors, use the first spring button (N); Assembled View
- Page 6 – NOTES
- Page 8 – USA
1
1 General
Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for
further instructions.
To ensure the safe installation of the crossover cable service kit, these instructions must be followed:
1.1
Symbols
Signal words are used in this manual and apply to hazards or unsafe practices which could result in
personal injury or property damage. See the information below for definitions of the signal words.
1.2
Tools Required:
Two 1/2 inch open end wrenches; one vice grip
1.3
Kit includes the following:
•
7000M465 Extension Weldment L.H., Qty 1; 7000M466 Extension Weldment R.H., Qty 1
•
7000M469 Pull Tube End Assembly (5143/5143IVC), Qty 1
•
553000M699 Link Fabric Extension with Open Hooks Attached, Qty 2
•
53000M701Instruction Sheet, Qty 1
•
53000M434 Bi-way Locknut, Qty 2
•
54000M6412 5/16-18 x 1-inch Bolt, Qty 2
•
51000M135 Helical Spring, Qty 4
•
1176192 Bed Extender Sub Assembly, Qty 1
WARNING
Warning indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
Caution indicates a potentially hazardous situation which, if not avoided, may result
in property damage or minor injury or both.
Gives useful tips, recommendations and information for efficient, trouble-free use.
84 inch Bed Extension (5143B)
Service Manual
DEALER:
Keep this manual. The procedures in this manual
MUST
be performed by a qualified technician.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
84 inch Bed Extension (5143B) 2 Part No 53000M701 1.4 General Warnings Safety 2 Usage Intended Use: For conversion of a 80-inch Split Spring Mattress Platform to an 84-inch Mattress Platform. 2.1 Disassembly 1. From the foot end (D), push the drive shaft (A) towards the head end (B) to compress the ...
Part No 53000M701 3 84 inch Bed Extension (5143B) 3. Separate link fabric by raising the head end and disengage the open end hooks that secure the head and foot springs together. 4. From the head end (H), lift up on the bed frame (I) and disengage the rivets (J) on the corner plates out of the corne...
Part No 53000M701 5 84 inch Bed Extension (5143B) 11. Remove existing pull tube (M) in head motor assembly or head crank assembly12. Install pull tube furnished with this kit in the following manner: • For beds equipped with AC motors, use the first spring button (N) • For beds equipped with DC moto...
