Invacare 1488 - Manual

Invacare 1488

Invacare 1488 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
Page: / 1
Loading the manual

SAFETY SUMMARY

The following recommendations are made for the
safe installation of the O2 Holder Accessory Kit:

2. Push the bracket of the O2 cylinder holder over

the rear upright of the wheelchair and secure in
place with the hex screw, spacer and locknut.

3. Install plug button on top of O2 cylinder holder.

4. Use the long adjustment knob on the O2 cylinder

holder bracket to secure the oxygen cylinder in
place.

Spacer

Plug Button

Rear Step

Tube

Rear

Upright

Long

Adjustment

Knob

Long Tube

Guide Insert

Short

Tube

Guide

Insert

Locknut

Hex

Screw

FIGURE 1 - INSTALLING O2 CYLINDER HOLDER

Bracket

O2 Cylinder

Holder

WARNING

DO NOT assemble or use this equipment without
first reading and understanding this
instruction sheet. If you are unable to understand
the warnings, cautions or instructions, contact a
healthcare professional, dealer or technical per-
sonnel before attempting to install this equipment
- otherwise, injury or damage may occur.

Check ALL parts for shipping damage. If
shipping damage is noted, DO NOT use. Contact
Carrier/Dealer for further instructions.

Ensure that ALL attaching hardware is securely
assembled to the wheelchair before operating
the chair with the O2 Cylinder Holder Accessory
Kit.

Follow the Oxygen Cylinder manufacturers guide-
lines for proper usage of the oxygen cylinder.

INSTALLING O2 CYLINDER HOLDER
(FIGURE 1)

N O T E : I f r e a r s t e p t u b e i s 7 / 8 - i n c h d i a m e t e r
tubing, install the long tube guide insert into the
rear step tube before installing the O2 cylinder
holder.

1. Place the O2 cylinder holder and slide it onto the

rear step tube of the wheelchair.

NOTE: IF rear upright tubing is 7/8-inch diameter
tubing, install the short tube guide insert over the
rear upright before installing and securing the O2
cylinder holder bracket.

O2 Cylinder Holder Accessory Kit

Assembly, Installation and Operating Instructions

Model Nos. 1488, 1497 and T1497

Invacare Corporation

www.invacare.com

USA

Canada

One Invacare Way

5970 Chedworth Way

Invacare

®

and Yes, you can. are trademarks of Invacare

Elyria, Ohio USA

Mississauga, Ontario

Corporation.

44036-2125

L5R 3T9, Canada

© 2000 Invacare Corporation

800-333-6900

905-890-8838

Form No. 91-200 Part No. 1027930

Rev E (2) 12/00

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Invacare Models

All Invacare Other