Invacare 1143214 - Manual

Invacare 1143214 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Page 2 – able and may result in entrapment or other injury.; Installing/Using the Epoxy Bed Rails; NOTE: DO NOT tighten the hex bolts and locknuts at this time.
Page 3 – for the opposite bed rail.
Page 4 – rails as shown in Detail “A” of FIGURE 2 on page 3.; Using the Epoxy Bed Rails; until the bed rail locks into place.; Installing/Using Nylasar Bed Rails; correct placement of the hardware.; Installing the IH5748A Bed Rails
Page 5 – FIGURE 4; Using the IH5748A Bed Rails; • Raising - Lift up on the bed rail until
Page 6 – Changing the Head Board Mounting Position; two mounting screws and locknuts. Securely tighten.; Changing the Mounting Position of the Mattress; using two mounting screws and locknuts. Securely tighten.
Page 7 – FIGURE 7; APPENDIX; SPECIAL NOTE; A Guide to Bed Safety Bed Rails in Hospitals, Nursing; Bed Rail Entrapment Statistics; staff intervened. Most patients were frail, elderly or confused.; NOTE: Mounting position of the
Page 8 – Patient Safety; provide safe care without restraints.; The Benefits and Risks of Bed Rails; caught between rails or between the bed rails and mattress.
Page 9 – Meeting Patients' Needs for Safety
Page 10 – Developed by the Hospital Bed Safety Workgroup
Page 11 – LIMITED WARRANTY

Loading the manual

Part No 1143214

ICCG Bed Rails

For more information regarding Invacare Continuing Care Group products, parts,

and services, please visit www.invacare-ccg.com

ICCG Bed Rails

Part No. 6801A, 6803A, 6808A, 6815A, 6816A and IH5748A

NOTE: Check all parts for shipping damage before using. In case of damage, DO NOT use the

equipment. Contact the Dealer/Carrier for further instructions

Safety Summary

WARNING

DO NOT use this product or any available optional equipment without first

completely reading and understanding these instructions and any additional

instructional material such as owner’s manuals, service manuals or instruction

sheets supplied with this product or optional equipment. If you are unable to

understand the warnings, cautions or instructions, contact a healthcare

professional, dealer or technical personnel before attempting to use this equipment

- otherwise, injury or damage may occur.
These bed rails are intended to prevent an individual from inadvertently rolling out

of bed. DO NOT use for restraint purposes.
DO NOT use the bed rails as push handles for moving the bed.
ALWAYS test to make sure that the bed rails are properly and securely in place

before using.
Invacare products are specifically designed and manufactured for use in conjunction

with Invacare accessories. Accessories designed by other manufacturers have not

been tested by Invacare and are not recommended for use with Invacare products.
Although bed rails are not rated to any specific weight limitation, the bed rails may

become deformed or broken if excessive side pressure is exerted on the bed rails.

This bed rail is not an assist rail for getting into or out of bed. DO NOT use the bed

rails as push handles when moving the bed.

ENTRAPMENT WARNING

ENTRAPMENT MAY OCCUR. Proper patient assessment and monitoring, and

proper maintenance and use of equipment is required to reduce the risk of entrap-

ment. Variations in bed rail dimensions, and mattress thickness, size or density

could increase the risk of entrapment. Visit the FDA website at http://www.fda.gov

to learn about the risks of entrapment. Review “A Guide to Bed Safety”, published

by the Hospital Bed Safety Workgroup, located at www.invacare.com. Use the link

located under each bed rail product entry to access this bed safety guide.

Assembly, Installation and Operating Instructions

SAVE THESE INSTRUCTIONS

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - able and may result in entrapment or other injury.; Installing/Using the Epoxy Bed Rails; NOTE: DO NOT tighten the hex bolts and locknuts at this time.

ICCG Bed Rails 2 Part No 1143214 ENTRAPMENT WARNING (CONTINUED) Refer to the owner’s manuals for beds for additional product and safety information.Mattress MUST fit bed frame and bed rails snugly to reduce the risk of entrapment.After any adjustments, repair or bed service and before use, make sure...

Page 3 - for the opposite bed rail.

Part No 1143214 3 ICCG Bed Rails 4. Install a socket screw into the head end and foot end mounting pins and tighten securely. 5. Securely tighten the hex bolts and locknuts that secure the pivot brackets to the bed frame. 6. Repeat STEPS 3-6 for the opposite bed rail. Installing 6815A, 6816A and 680...

Page 4 - rails as shown in Detail “A” of FIGURE 2 on page 3.; Using the Epoxy Bed Rails; until the bed rail locks into place.; Installing/Using Nylasar Bed Rails; correct placement of the hardware.; Installing the IH5748A Bed Rails

ICCG Bed Rails 4 Part No 1143214 6. Secure the bed rail to the mounting bracket with the two socket screws.7. Head End Mounting Bracket Only - Position the crossmember between the two bed rails as shown in Detail “A” of FIGURE 2 on page 3. 8. Repeat STEPS 3-7 to install the other bed rail on the opp...