Integra RDC-7.1 - Manual
Integra RDC-7.1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Connecting a Power Amplifier; Audio connection cable; Subwoofer; GND
- Page 3 – Connecting Monitors such as TV or Projector; VIDEO; IN; Option
- Page 4 – Connecting to an IntegraRESEARCH DVD player RDV-1.1; Use an; Connecting a DVD Player; cable
- Page 5 – s AUDIO IN 4 L/R to the analog; DVD player
- Page 6 – ] buttons to select “Multichannel” and then use the [; AUDIO OUT
- Page 7 – connection or i.LINK connection, operate the; To wall outlet; Connecting the Supplied Power Cord
- Page 8 – Printed in Japan; ] buttons to select a listening; Operating with the remote controller:; Selecting Listening Modes; Other Information
1
RDC-7.1
• For full details on using the RDC-7.1, refer to the main instruction manual.
• For optimum surround playback, set the distance between the listener and the speakers so that the time it takes
the sound to reach the listener is the same. Also, you need to set each speaker volume level individually in order
to balance the volume level between speakers (See pages 92 to 94 in the main manual).
Enjoying Home Theater
Center speaker
Complements the sound effects from
front left and right speakers to enrich
and clear the sound image and
movement. In movies, an actor’s speech
comes mainly from the center speaker.
•
When placing the center speaker
above or below the TV, tilt it toward
the listener’s ears.
•
Place the center speaker as close to
the screen or monitor as possible and
in the center between the left and
right front speakers. When placing
the center speaker near the TV, use a
shielded speaker.
Subwoofer
Outputs only bass sounds to
enhance and complement bass
sound effects.
Front left and right speakers
Outputs overall sound. They play the most important role in a home theater
system, by creating basic sound images and fields.
•
Place the front left and right speakers symmetrically and so that the dis-
tance from the listening position is the same.
•
When placing speakers, direct the speakers toward the position of the
listener’s ears where the listener sits to enjoy music or movies.
Surround left and right speakers
Enhances the sensation of being at a live performance by giving three-dimensional
sound movement to the sound effects.
•
Place these speakers on each side of, or angled behind, the listener.
•
Place the surround speakers symmetrically from the listener position and so that the
distance from the listener is equal between left and right surround speakers.
Surround back speakers
Enhances the sound space
representation with
surround channel signals.
Recreating sound movement
effects and sound fields
behind the listener gives a
more realistic experience.
Quick Guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 You can connect the RDC-7.1 (PRE OUT A terminals) and the power amplifier through RCA terminals using RCA type audio pin cables. Also you can connect the amplifiers through XLR (Balanced) type terminals using XLR type cables. The figure below illustrates the connection to the RDA-7.1, a power ampl...
3 An appropriate option board [H] [I] should be installed to connect a TV or a projector. • This section describes the connections for displaying the video source or the operating information of the RDC-7.1 on a monitor device such as a TV or projector. Before making a connection, check the terminal...
4 An appropriate option board [H] [I] should be installed to connect a DVD player. The description here guides you to make connection between the RDC-7.1 and your DVD player in a quickest way where no modification is required for the default settings of the unit. The guidance is divided into 4 ways ...
