Page 2 - ESPRESSO FINISH CLOSED CABINET TV STAND; SAFETY INFORMATION AND SPECIFICATIONS; Maximum overall weight:
2 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com SAFETY INFORMATION AND SPECIFICATIONS CAUTION: The top surface of this stand is designed for use with a product weighing no more than 95 lbs. (43 kg) and having a width that permits it to sit evenly on the stand with no more than a o...
Page 3 - PACKAGE CONTENTS: PARTS
3 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com PACKAGE CONTENTS: PARTS Make sure that you have all the parts necessary to assemble your new TV stand. While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguish similar pa...
Page 4 - PACKAGE CONTENTS: HARDWARE; Label
4 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com PACKAGE CONTENTS: HARDWARE Note: The table below shows the required hardware. You may receive extra hardware. Make sure that you have all the hardware necessary to assemble your new TV stand. Label Hardware Qty. U 8 V 2 W 2 X 1 Y 18 ...
Page 5 - ASSEMBLY INSTRUCTIONS; Step 1: Preparing the right and left ends and the uprights
5 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com ASSEMBLY INSTRUCTIONS Step 1: Preparing the right and left ends and the uprights Caution: Assemble your stand on a carpeted floor or on the empty carton to avoid scratching your stand. • Push a Sauder twist-lock ® fastener ( U ) into...
Page 6 - Preparing the short brace; Push two hidden cams (
6 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com Step 2 : Preparing the short brace • Push two hidden cams ( V ) into the short brace ( Q ). Then, insert the metal end of a cam dowel ( W ) into each hidden cam ( V ). NOTE : Do not tighten the hidden cams in this step. V W Q Arrow A...
Page 7 - Preparing the top; Fasten the top molding (
7 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com Step 3 : Preparing the top • Fasten the top molding ( O ) to the top ( E ). Use six silver 1-1/8” flat head screws ( GG ). E O Curved edge Finished surface Su rfa ce w ith ho les You’ll need: Phillips screwdriver GG (6) NS-WD1450_NS-...
Page 8 - Attaching the uprights to the top; To use the Sauder twist-lock
8 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com Step 4 : Attaching the uprights to the top • Fasten the uprights ( C and D ) to the underside of the top ( E ), then tighten the four Sauder twist-lock® fasteners ( U ). To use the Sauder twist-lock ® fasteners: 1 Insert the dowel en...
Page 9 - Attaching the outer backs; CC
9 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com Step 5 : Attaching the outer backs 1 Insert two metal pins ( CC ) into each side of the outer backs ( H ). 2 Insert the metal pins ( CC ) in the outer backs ( H ) into the holes in the uprights ( C and D ). D C H H CC CC Fin ish ed F...
Page 10 - Attaching the ends
10 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com Step 6 : Attaching the ends • Fasten the ends ( A and B ) to the top ( E ), then tighten the four Sauder twist-lock® fasteners ( U ). Note : Make sure that the metal pins ( CC ) in the outer backs ( H ) insert into the holes in the ...
Page 11 - Attaching the bottom and the short brace
11 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com Step 7 : Attaching the bottom and the short brace 1 Fasten the bottom ( F ) to the ends ( A and B ) and the uprights ( C and D ) with eight black 1-7/8” flat head screws ( FF ). 2 Fasten the short brace ( Q ) to the bottom ( F ), th...
Page 12 - Preparing the braces
12 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com Step 8 : Preparing the braces • Fasten the eighteen metal brackets ( Y ) to the long braces ( P ) and side braces ( R ) with eighteen black 9/16” large head screws ( II ). Note : Make sure that the brackets are even with the edges o...
Page 13 - Attaching the braces
13 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com Step 9 : Attaching the braces 1 Fasten the long braces ( P ) to the bottom ( F ) with eight black 9/16” large head screws ( II ). 2 Fasten the long braces ( P ) to the short brace ( Q ) with two black 1-7/8” flat head screws ( FF )....
Page 14 - Attaching the base blocks and skirts
14 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com Step 10 : Attaching the base blocks and skirts 1 Fasten the base blocks ( S and T ) to the long brace ( P ) with eight silver1-1/8” flat head screws ( GG ). Note : There are no pre-drilled holes in the base blocks. The screws will t...
Page 15 - Attaching the back
15 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com Step 11 : Attaching the back 1 Carefully turn over your TV stand onto its front edges. Unfold the back ( G ) and lay it over the unit. 2 Make sure the back is centered along all four edges. Push on opposite corners, if required, to ...
Page 16 - Attaching the doors
16 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com Step 12 : Attaching the doors 1 Carefully stand your unit upright. 2 Fasten two hinges ( Z ) to each door ( I ). Use four black 1/2” flat head screws ( JJ ) on each door. 3 Fasten the first door ( I ) to the right end ( A ) and the ...
Page 17 - Adjusting the doors; side to side; up and down; in or out
17 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com Step 13 : Adjusting the doors Refer to the enlarged diagram to identify the parts on the hinges.The doors may need some adjustments. Follow the text below to make needed adjustments. DOOR ADJUSTMENTS: • To adjust the doors from side...
Page 18 - Attach miscellaneous hardware and labels; DD; WARNING
18 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com Step 14 : Attach miscellaneous hardware and labels 1 Push the rubber sleeves ( DD ) over one end of each metal pin ( CC ). Insert the metal end of the pins into the hole locations of your choice in the ends ( A and B ) and uprights ...
Page 19 - CARE AND MAINTENANCE; Glass; How to avoid the problem:
19 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com CARE AND MAINTENANCE Wood/Laminate • Use your favorite type of furniture polish. • Do not spray polish directly onto the stand. Spray onto a soft cloth then wipe the stand. • Always test any polish in a discrete location first, such...
Page 20 - How long does the coverage last?
20 ESPRESSO FINISH CLOSED CABINET TV STAND www.insigniaproducts.com ONE-YEAR LIMITED WARRANTY - INSIGNIA Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in t...
Page 21 - Certificate of Conformity
Certificate of Conformity 1. This certificate applies to the Insignia Product identified by this instruction booklet. 2. This certificate applies to the compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303). 3. This product was manufactured for: Insignia 4. Date of Manu...
