Insignia NS-TADPCON-C - Manual

Adapter

outlet

Power indicator

Mode
switch

Making sure your device is compatible

Warning

: Failure to select the correct voltage setting could damage

your device. DO NOT use this converter with high-wattage devices, such
as hair dryers and curling irons.

1

Determine the voltage of the power outlet you want to use.

See the table on the next page for common voltages.

2

Check the voltage of the device you want to connect to the

power outlet.

Check out these important
safety instructions to keep
yourself and your devices safe.

• Read and review these instructions before using the

converter/adapter.

• Before using the converter/adapter, check the product you

intend to connect to the converter/adapter for the
manufacturer’s voltage and wattage rating, which should be
located on the product.

Caution

: Adapters alone do not convert voltage. To avoid damaging

your device, select

CONVERTER

when necessary.

•

DO NOT

use this product with hair dryers, curling irons, or

other high-wattage devices.

• Do not leave the converter/adapter in the power outlet

when not in use. Do not continue to use the
converter/adapter if it is not working properly, has been
damaged, or dropped in water.

• Check your appliance label to see if it requires less than 2.5A.
• No grounding. This product is for use with unearthed or

double-insulated appliance only.

Warning

: This product is intended for adult use. This product is NOT

intended for use by unsupervised children. Choose proper settings and
plug in this product before directly supervising children using devices
connected to this product.

Quick Setup Guide

Low Wattage Travel Converter/Adapter | NS-TADPCON / NS-TADPCON-C

Before using your new product, please read

these instructions to prevent any damage.

Package contents

• Low wattage travel converter/adapter
•

Quick Setup Guide

Features

3

Compare the power outlet voltage to your device’s voltage.

Note

: The voltage of some devices will be a range. If your power

outlet voltage is in the range of your device’s voltage (for example, a
120-240V device and a 240V power outlet), use ADAPTER mode.

*

Note

: If the power outlet is 100V and your device is 120V, use

ADAPTER

mode.

3-prong blades

Plug
selector

Flat angled and

parallel blades

Round pins

The power outlet
voltage is:

• The same as your device’s

voltage

• In the range of your

device’s voltage

• 100V and your device is

120V

• Greater than your device’s

voltage

• Less than your device’s

voltage*

Slide the mode
switch to:

ADAPTER

CONVERTER

Your device is not
compatible. Do NOT use
this converter/adapter
with your device

4

Check the wattage of your device.

If you use ADAPTER mode:

If you use CONVERTER mode:

Device wattage is:

275W max. at 100-120V
575W max. at 100-240V

576W or more

Instructions:

You can use this adapter.
See “Selecting your plug”
for further instructions.

Your device is not
compatible. Do NOT use this
adapter with your device.

Device wattage is:

0-25W

26W or more

Instructions:

You can use this converter.
See “Selecting your plug”
for further instructions.

Your device is not
compatible. Do NOT use this
converter with your device.

BE

CAREFUL!

NS-TADPCON_NS-TADPCON-C_14-0202_QSG_V1_EN.ai 1 3/13/2014 9:13:07 AM

NS-TADPCON_NS-TADPCON-C_14-0202_QSG_V1_EN.ai 1 3/13/2014 9:13:07 AM