Insignia NS-LT600P-2 - Manual

Insignia NS-LT600P-2

Insignia NS-LT600P-2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

Flat size (W×H): 209.2 × 148 mm.
Final folded size: 104.6 × 148 mm.

INSTALLING THE WATER FILTER

1

YOU MUST SOAK your new filter in water for 15 minutes prior to
installing it in your refrigerator to remove air from the carbon block.

2

Twist the old filter a quarter-turn counter-clockwise.

3

Pull the filter straight out and discard.

4

Push the new filter into the refrigerator until it stops.

5

Twist the filter a quarter-turn clockwise.

6

Run about two to three gallons of water through your refrigerator’s water
dispenser to remove air and loose carbon pieces. The water may be
cloudy and sputter until the air is removed.

7

Reset your “change filter” indicator (if your refrigerator has one). See

below.

RESETTING YOUR CHANGE FILTER INDICATOR

Note:

These are the most common filter reset instructions. If the instructions don’t

work for your refrigerator brand, see the documentation that came with your
refrigerator.

Quick Setup Guide |

NS-LT600P-2

Refrigerator Filter

Before using your new product, please read these instructions to prevent any damage.

Congratulations on your purchase of one of the highest performing
water filters on the market today. Insignia filters use a high-grade
coconut carbon that has 50% more micro-pores than standard carbon.
They also use fewer high-compression binders, giving you the best
water filtration possible.

PACKAGE CONTENTS

• Refrigerator filter(s) (2 pack)

Quick Setup Guide

GENERAL INSTALLATION GUIDELINES

• It is normal for black carbon fines (particles) to appear on the outside

of your filter. This happens when the filter is jarred in shipping. It is
safe, simply wipe it off.

The filter connectors are larger to prevent leaks. You might have to
twist the filter hard to make sure the connection is secure.

REFRIGERATOR BRAND

LG

Kenmore

INSTRUCTIONS

Press and hold the reset button for three seconds.

The water filter reset for Kenmore refrigerators
varies by model. See the documentation that
came with your refrigerator.

NS-LT600P-2_15-0330_QSG_V1_EN.ai 1 4/9/2015 9:13:44 AM

NS-LT600P-2_15-0330_QSG_V1_EN.ai 1 4/9/2015 9:13:44 AM

V1

FINAL

FOR PRINT

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Insignia Models

All Insignia Other