Insignia NS-LCD32-09 - Manual
Insignia NS-LCD32-09 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
FAQs
Insignia 32” LCD HDTV 720p (NS-LCD32-09)
September 30, 2008
My picture is not filling the screen. I have black bars around my picture.
•
This is due to the aspect ratio. An increasing amount of digital TV programming and movies are presented in wide
screen (16:9).
•
To change the appearance of the screen, cycle through these four options by pressing the
Zoom
button on the remote:
o
Normal:
Selects the aspect ratio that matches to source’s aspect ratio (4:3 or 16:9)
o
Wide:
Displays a full-screen image
o
Zoom:
Enlarges the picture. The top and bottom may be cropped.
o
Cinema:
Stretches the image at the edges while maintaining a clear image in the center of the screen.
How do I hook up my external device (e.g., game system, DVD player, VCR, etc.)?
•
What type of cable are you using?
o
HDMI
Connect an HDMI cable to the
HDMI 1
or
HDMI 2
jack on the back of your TV or
HDMI 3
jack on the
side of your TV and to the
HDMI Out
jack on the HDMI device.
To play from an HDMI device:
•
Turn on the HDMI device, then set it to the correct mode. See the documentation that came
with the device for further instructions.
•
Turn on your TV, then press
INPUT
. The
Source List
menu opens.
•
Press
^
or
v
to select
HDMI 1
,
HDMI 2
, or
HDMI 3
, then press
ENTER
.
o
Component Video Cables are red, green and blue. The audio cables will be red and white.
Connect a component cable to the
COMPONENT 1
or
COMPONENT 2
jacks on the back of your TV
and to the
COMPONENT Out
jacks on the component device.
To play from a component device:
•
Turn on the component device, then set it to the correct mode. See the documentation that
came with the device for further instructions.
•
Turn on your TV, then press
INPUT
. The
Source List
menu opens.
•
Press
^
or
v
to select
Component 1
or
Component 2
, then press
ENTER
.
o
S-Video Cable has a round end with prongs in a semi-circle and Audio Cables that are red and white.
Connect an S-Video cable to the
S-VIDEO REAR
jack on the back of your TV or
S-VIDEO SIDE
jack
on the side of your TV and to the
S-VIDEO Out
jack on the S-Video device.
Connect an audio cable to the
L AV 1 IN
and
R AV 1 IN
jacks on the back of your TV or
L AV 2 IN
and
R AV 2 IN
and to the
Audio Out
jacks on the S-Video Device.
To play from an S-Video device:
•
Turn on the S-Video device, then set it to the correct mode. See the documentation that came
with the device for further instructions.
•
Turn on your TV, then press
INPUT
. The
Source List
menu opens.
•
Press
^
or
v
to select
S-VIDEO REAR
or
S-VIDEO SIDE
, then press
ENTER
.
o
Composite (A/V Cables, RCA Cables) have a yellow video cable, and red and white audio cables.
Connect a composite cable to the
AV 1 IN
jacks on the back of your TV or
AV 2 IN
jacks on the side of
your TV and to the
Video Out
and
Audio Out
jacks on the composite device.
To play from a composite device:
•
Turn on the Composite device, then set it to the correct mode. See the documentation that
came with the device for further instructions.
•
Turn on your TV, then press
INPUT
. The
Source List
menu opens.
•
Press
^
or
v
to select
Composite Rear
or
Composite Side
, then press
ENTER
.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
