Insignia NS-B4111 - Manual

Read these instructions carefully before using this product, and retain
them in a safe place for reference.

Features
Top

1

Handle

5

Function (RADIO/CD/AUX)

2

CD door

6

Power (ON/OFF)

3

Volume control

7

Tuning control

4

FM antenna

8

CD door open (push tab)

Back

1.5V x 8 UM 2 or

“C” size or LR14

+

- +

-

+

-

+

-

+

-

+

-

+

- +

-

1

AUX IN jack

2

Battery compartment

3

AC input

Quick Installation Guide

NS-B4111 CD Boombox

Front

1

Speaker

8

Speaker

2

CD play/pause button

9

Time set button

3

CD stop button

10 Display button

4

CD skip next button

11 Repeat button

5

CD track display

12 Random button

6

CD skip previous button

13 Standby button

7 AM/FM

button

Setting up your CD player

Connecting AC power

1

Connect the provided AC power cord to the AC input socket on

the CD player.

2

Plug the cord into a household AC power socket.

Installing batteries

1

Insert eight C alkaline batteries (not included) into the battery

compartment as indicated by the diagram within the
compartment.

2

Securely close the battery compartment cover.

Notes

: Battery power is used only when AC power is disconnected.

Replace all batteries at the same time with the same battery type.
Do not mix battery types.
When CD player is stored unused for a long time, remove the
batteries to prevent damage.

Setting the clock

1

Turn off your CD player, then press

TIME SET

. The hour digits fl ash. Set

time under Standby mode.

2

Press

or

to adjust the hour,

then

press

TIME SET

. The minute

digits

fl ash.

3

Press or

to adjust the minute,

then

press

TIME SET

. The clock is set.

4

To view the clock, turn on your CD

player, then press

DISPLAY

.

NOTE

: While the boombox is in standby mode running on battery

power, your batteries will continue to slowly drain, although
the clock’s time will be saved. To prevent battery drain, turn the
boombox completely off by sliding the power switch (although
your clock setting will be lost).

Using your CD player

Warning

: Use of any controls, adjustments, or procedures other

than those specifi ed herein may result in hazardous radiation
exposure.

Using the radio

1

Slide the

FUNCTION

selector to

RADIO

, then press

AM/FM

to

select

AM

or

FM

mode.

2

Turn the

TUNING

control until you locate the station you want.

If you tune to an FM station broadcasting in stereo, the stereo
indicator turns on. “ST” will appear in the upper-right of the LCD
screen when stereo is on.

For optimum FM reception, make sure that the FM
(telescopic) antenna is fully extended and vertical.

For optimum AM reception, rotate the CD player to orient its
built-in antenna until you get the strongest signal.

Using the CD player

The CD player can play standard audio CDs and audio CDs created
on a computer’s CD-R/CD-RW drive.

1

Slide the

FUNCTION

selector to

CD

, then lift the CD door and

insert a CD with the label facing up. Make sure that the CD is
correctly mounted on the spindle and locked in place.

•

•

NS-B4111_09-0103_QSG_V2_EN.indd 1

NS-B4111_09-0103_QSG_V2_EN.indd 1

3/4/2009 7:57:12 PM

3/4/2009 7:57:12 PM