Page 2 - 7” ESPRESSO GAMING TV STAND; SAFETY INFORMATION AND SPECIFICATIONS; -inch overhang on each
2 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com SAFETY INFORMATION AND SPECIFICATIONS CAUTION: The top surface of this stand is designed for use with a product weighing no more than 95 lbs. (43 kg) and having a width that permits it to sit evenly on the stand with no more than a one-inch ove...
Page 3 - PACKAGE CONTENTS: PARTS
3 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com PACKAGE CONTENTS: PARTS Tools needed: Phillips screwdriver Hammer A Right end (1) B Left end (1) C Right upright (1) D Left upright (1) F Top (1) G Bottom (1) H Shelf (1) E Upright (1) NT-13SGAM_14-0248_MAN_V1_ENG.fm Page 3 Thursday, May 1, 201...
Page 5 - PACKAGE CONTENTS: HARDWARE; Label
5 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com PACKAGE CONTENTS: HARDWARE Note: You may receive extra hardware. Make sure you have all the hardware necessary to assemble your new TV stand: Label Hardware Qty. U 2 V 2 W 2 X 2 Y2 10 Z2 10 AA 1 BB 1 CC 4 DD 3 Right drawer rail Left drawer rail...
Page 6 - ASSEMBLY INSTRUCTIONS; Step 1: Assemble the ends and uprights; Important: Do not tighten the hidden cams in this step.
6 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com ASSEMBLY INSTRUCTIONS Step 1: Assemble the ends and uprights Note: Assemble your TV stand on carpeted floor or on the empty carton to avoid scratching your stand or the floor. 1 Push two hidden cams ( Y2 ) into the right end ( A ), left end ( B...
Page 7 - Step 2: Attaching the drawer rails; OO
7 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 2: Attaching the drawer rails • Fasten the two right drawer rails ( U ) to the right end ( A ) and the two left drawer rails ( V ) to the right upright ( C ) using two gold 5/16" flat head screws ( OO ) per rail. OO OO OO OO OO OO OO O...
Page 8 - Tip: How to tighten hidden cams; remaining
8 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Tip: How to tighten hidden cams In the remaining steps, use these illustrations for instructions on tightening hidden cams. Warning: Risk of damage or injury. Hidden cams must be completely tightened. Hidden cams that are not completely tighten...
Page 9 - Attach the top to the left end; HH
9 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 3 : Attach the top to the left end 1 Identify the rounded edge on the left end ( B ) and the top ( F ) and the finished edge on the upright ( E ). Make sure these edges face the same direction. 2 Place the top ( F ) face down, then insert ...
Page 10 - Attach the shelf
10 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 4 : Attach the shelf 1 Make sure that the side of the shelf ( H ) with the hidden cams faces up, and the finished edge faces the same direction as the finished edge on the upright ( E ). 2 Insert the cam dowels on the edge of the shelf ( ...
Page 11 - Step 5: Install the uprights
11 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 5: Install the uprights 1 Make sure that the finished edge on the right upright ( C ) and on the left upright ( D ) faces the same direction as the finished edge on the shelf ( H ). 2 Insert the two cam dowels on the right upright ( C ) i...
Page 12 - Step 6: Install the right end
12 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 6: Install the right end 1 Make sure that the side of right end ( A ) that has the rails attached faces the center of your TV stand. 2 Insert the cam dowels on the edge of the right end ( A ) into the holes on the top ( F ), and insert th...
Page 13 - Step 7: Install the bottom
13 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 7: Install the bottom 1 Make sure that the rounded edge on the bottom ( G ) faces forward. 2 Fasten the bottom ( G ) to the ends ( A and B ) and uprights ( C and D ) using eight black 1-15/16" flat head screws ( KK ). KK KK KK KK KK K...
Page 14 - Step 8: Install the corner brackets
14 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 8: Install the corner brackets 1 Fasten four corner brackets ( CC ) to the feet ( R and S ) using two black 9/16” large head screws ( NN ) per bracket. 2 Make sure that the narrow edges of the feet ( R and S ) face the same direction as t...
Page 15 - Step 9: Install the skirts
15 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 9: Install the skirts 1 Insert a metal pin ( HH ) into each end of the front skirt ( K ). 2 Align the front skirt ( K ) to the front edge of the bottom ( G ), then insert the ends of the metal pins into the feet ( R and S ). Make sure tha...
Page 16 - Step 10: Install the skirt brackets and the foot
16 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 10: Install the skirt brackets and the foot 1 Fasten three metal brackets ( DD ) to the bottom ( G ) and front skirt ( K ) using two black 9/16" large head screws ( NN ) per bracket. 2 Fasten the foot bracket ( BB ) to the bottom ( G ...
Page 17 - Step 11: Install the back; Do not stand your TV stand upright
17 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 11: Install the back 1 Carefully turn your TV stand over onto its front edges. Unfold the back ( I ) and lay it over your TV stand. 2 Make equal margins along all four edges of the back ( I ). Push on opposite corners of your TV stand if ...
Page 18 - Step 12: Assemble the drawer
18 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 12: Assemble the drawer 1 Insert the tab on the right drawer side ( D16 ) at an angle into the slot on the right side of a drawer front ( M ). The tab should easily fit into the slot. Gently tilt the drawer side ( D16 ) from side to side ...
Page 19 - LL
19 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 13: Assemble the drawer (continued) 1 Fasten a drawer back ( D73 ) to the drawer sides ( D16 and D17 ) using four black 1-9/16" flat head screws ( LL ). Note: Make sure that the drawer bottom ( D720 ) inserts into the groove in the dr...
Page 20 - Step 14: Attach the drawer slides; FF
20 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 14: Attach the drawer slides 1 Insert a slide cam ( FF ) into the drawer sides ( D16 and D17 ). 2 Fasten the drawer slides ( W and X ) to the drawer sides ( D16 and D17 ) using two gold 5/16" flat head screws ( OO ) per slide. Note: T...
Page 21 - Step 15: Attach the drawer knob; EE
21 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 15: Attach the drawer knob 1 From the front of the drawer, align the knob ( EE ) over the hole in the drawer front ( M ), then fasten a knob ( EE ) to the drawer front ( M ) using a gold 1" machine screw ( MM ). 2 Repeat this step for...
Page 22 - This is a permanent
22 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 16: Install the metal shelf pins and the drawers, and attach the warning label 1 Carefully stand your TV stand upright. 2 Push the rubber sleeves ( II ) over the four remaining metal pins ( HH ). Insert the metal pins into the hole locati...
Page 23 - Step 17: Adjust the drawers
23 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com Step 17: Adjust the drawers Note: Adjusting the drawers helps the drawer fronts line up better when the drawers are closed. 1 Loosen the #3 screws in the drawer slides a 1/4 turn, then turn the cams clockwise or counterclockwise. Notice how th...
Page 24 - CARE AND MAINTENANCE; Glass; How to avoid the problem:
24 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com CARE AND MAINTENANCE Wood/Laminate • Use your favorite type of furniture polish. • Do not spray polish directly onto the stand. Spray onto a soft cloth then wipe the stand. • Always test any polish in a discrete location first, such as the bac...
Page 25 - How long does the coverage last?
25 47” ESPRESSO GAMING TV STAND www.insigniaproducts.com ONE-YEAR LIMITED WARRANTY - INSIGNIA Definitions: The Distributor* of Insignia branded products warrants to you, the original purchaser of this new Insignia-branded product (“Product”), that the Product shall be free of defects in the original...
Page 26 - Certificate of Conformity
Certificate of Conformity 1. This certificate applies to the Insignia Product identified by this instruction booklet. 2. This certificate applies to the compliance of this product with the CPSC Ban on Lead-Containing Paint (16 CFR 1303). 3. This product was manufactured for: Insignia 4. Date of Manu...
