Insignia NS-0S312 - Manual
Insignia NS-0S312 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
PACKAGE CONTENTS
• Speakers
(2)
• Wall-mount brackets (2)
• Screws
(4)
• Knobs (4) (For wall mounting)
•
Quick Setup Guide
1 CONNECT YOUR SPEAKERS
1
Connect the red speaker terminals to the red (+) amplifier terminals.
2
Connect the black speaker terminals to the black (-) amplifier terminals.
See the documentation that came with your amplifier or home theater system
for more information on connecting the cables.
Note
:
For best performance, speaker wires must be connected correctly. All two-conductor wire
is marked in some way to help with this. One side will be marked with a colored stripe, raised
rib, or different-color conductor. Use the marked side for the “red” connections. We recommend
using 18-gauge or heavier speaker wire.
Quick Setup Guide
I
NS-OS312
2-Way Outdoor Speakers
Before using your new product, please read
these instructions to prevent any damage.
Congratulations on your purchase of a high-quality Insignia product. Your 2-Way Outdoor Speakers are designed for reliable and trouble-free performance.
2 INSTALL WALL-MOUNT BRACKETS
NOTE
: If you are installing your speakers outdoors, select locations
facing your listening area that are protected from rain and snow, and
are out of direct sunlight.
1
Screw the wall-mount brackets onto the wall where
you want to mount the speakers. If the location is
backed by wooden wall studs, you can use the wood
screws provided. If the location is backed by only dry
wall, concrete, or other wall types, use wall anchors
(not included).
2
Slide a speaker into each mounting bracket.
3
Line up the screw holes (one on top, one on bottom),
then screw a knob into each hole to secure the
speaker to the bracket. You can loosen the knobs to
adjust the direction the speakers are pointing.
Amplifier/home
theater system
Note
: Make sure to
connect the + terminal on
the speaker to the
+ terminal on the amplifier
and connect the - terminal
on the speaker to the
- terminal on the
amplifier.
Flat size (W×H): 297 × 210 mm.
Final folded size: 99 × 210 mm.
NS-OS312_14-1140_QSG_V2_EN.ai 1 10/7/2014 3:06:33 PM
NS-OS312_14-1140_QSG_V2_EN.ai 1 10/7/2014 3:06:33 PM
V2
FINAL
FOR PRINT
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
