Ingersoll Rand VL2-020 - Manual
Ingersoll Rand VL2-020 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SAFETY INFORMATION; are used to identify the level of potential hazard.; Safety Summary; hoists are manufactured in accordance with the
- Page 3 – “DO NOT OPERATE”
- Page 4 – SPECIFICATIONS; General
- Page 5 – INSTALLATION; The; Initial Operating Checks; Installing Chain Container; OPERATION; Follow all safety instructions when operating hoist.; Hoist Operation
- Page 6 – Storing the Hoist; Always store hoist in a no load condition.; INSPECTION; Records and Reports; periodic; Frequent Inspection
- Page 7 – Periodic Inspection; yearly
- Page 9 – Load Chain; Use; MAINTENANCE; Installing New Load Chain; Remove “C” link and old load chain.
- Page 10 – Suspend the; Table 3: Overload Clutch Test Loads; * Each hoist body must be tested separately.
- Page 11 – Brake Disc Replacement; Separate remaining parts of overload clutch assembly.; Cleaning, Inspection and Repair; Cleaning; Examine all gear teeth carefully, remove nicks and burrs.; Hoist Assembly
- Page 12 – The 1/2 ton hoist has a center pinion gear with only five; Hand Chain Adjustment or Replacement; Load Test
- Page 13 – 5 AND 20 TON TOP AND BOTTOM HOOK ASSEMBLY DRAWING; Top and Bottom Hook
- Page 14 – HOIST ASSEMBLY PARTS DRAWING; Connect
- Page 15 – HOIST ASSEMBLY PARTS LIST
- Page 18 – HOIST OVERLOAD CLUTCH ASSEMBLY DRAWING AND PARTS LIST
- Page 20 – Old Style; ACCESSORIES; hoist. Older hoists that were equipped; Chain Container Chart
- Page 21 – Return Goods Policy; and 5 ton Hoists
- Page 22 – SERVICE NOTES
- Page 23 – WARRANTY; IMPORTANT NOTICE; Visible Loss or Damage
Form MHD56012
PARTS, OPERATION AND MAINTENANCE MANUAL
for
MANUAL CHAIN HOIST MODELS
VL2-005
VL2-010
VL2-015
VL2-020
VL2-030
1/2 ton
1 ton
1-1/2 ton
2 ton
3 ton
VL2-050
VL2-080
VL2-100
VL2-150
VL2-200
5 ton
8 ton
10 ton
15 ton
20 ton
Including
S•COR•E
(Spark and Corrosion Resistant) Features
Unless otherwise noted, tons in this manual are metric tons (2,200 lbs.)
Form MHD56012
Edition 8
July 2004
71116107
©
2004 Ingersoll-Rand Company
READ THIS MANUAL BEFORE USING THESE PRODUCTS. This manual
contains important safety, installation, operation and maintenance
information. Make this manual available to all persons responsible for the
installation, operation and maintenance of these products.
Do not use this hoist for lifting, supporting, or transporting people or lifting or
supporting loads over people.
Always operate, inspect and maintain this hoist in accordance with American National
Standards Institute Safety Code (ASME B30.16) and any other applicable safety codes
and regulations.
(Dwg. MHP0037)
1/2, 1, 1-1/2 and 2 ton
(Dwg. MHP0038)
3 and 5 ton
(Dwg. MHP0039)
15 ton
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 MHD56012 - Edition 8 SAFETY INFORMATION This manual provides important information for all personnel involved with the safe installation, operation and proper maintenance of this product. Even if you feel you are familiar with this or similar equipment, you should read this manual before operating...
MHD56012 - Edition 8 3 WARNING TAG Each hoist is supplied from the factory with the warning tag shown. If tag is not attached to your unit, order a new tag and install it. Refer to the parts list for the part number. Read and obey all warnings and other safety information attached to this hoist. Tag...
4 MHD56012 - Edition 8 SPECIFICATIONS General The VL2 Manual Chain Hoist can be mounted to the suspension shaft of a trolley or a permanent mounting structure. The hoist is designed to lift and lower loads up to rated capacity with minimal effort. To determine your hoist configuration refer to the c...
