Ingersoll Rand TP0423S5XXXXXXXX - Manual
Ingersoll Rand TP0423S5XXXXXXXX – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION; OPERATING INSTRUCTIONS / INITIAL SET-UP PROCEDURE; STAND CLEAR WHEN RAISING OR; P I N C H H A Z A R D. Fo l l o we r c a n d e s c e n d; AIR CONTROLS
- Page 3 – Figure 3
- Page 4 – DIMENSIONAL DATA; Figure 4
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET -BRYAN, OHIO 43506
(800) 495-0276
y
FAX (800) 892-6276
© 2010
CCN 15337447
www.ingersollrandproducts.com
OPERATOR’S MANUAL
TP0423S5XXXXXXXX
INCLUDING: OPERATION, INSTALLATION AND MAINTENANCE.
INCLUDE MANUALS: AF0423SXXXXXX-XX-X Extrusion Pump (97999-1499), 66516-X Follower Assembly (pn
97999-854), 67195-X Follower Assembly (pn 97999-841), RM552X-X Two Post Lift / Ram (pn 97999-1445), & S-636
General Information (pn 97999-636).
RELEASED: 2-15-10
(REV. 01)
TWO POST RAM PACKAGE
55 GALLON
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
4-1/4” AIR MOTOR
23:1 RATIO
6” STROKE
TP0423S5XXXXXXXX RAM PACKAGE
Figure
1
SERVICE KITS
Use only genuine ARO® replacement parts to assure com-
patible pressure rating and longest service life.
637489
for repair of air motor section.
104302
for repair of P39124-100 fi lter / regulator.
104453
for repair of P39344-100 fi lter / regulator.
637466
for repair of lift / ram seals.
637074-X43-B
for repair of lower end pump section.
MODEL DESCRIPTION CHART
y
y
y
y
y
y
X
Air Motor Size
04 - 4-1/4”
Pump Ratio
23 - 23:1
Check Type / Wetted Materials
S - Chop Check / Carbon Steel
Lower Pump End Options
Refer to pump model operator’s manual
Mount Style
5 - 55 gallon (400 lbs)
Follower Assembly
AC - 66516
AN - 67195-2
AA - 66516-1
AV - 67195-3
AB - 66516-2
TM - 67195-5
TC - 66516-5
TB - 67195-6
TA - 66516-6
TV - 67195-7
TB - 66516-7
AS - 67195-8
AM - 67195-1
TS - 67195-9
Package
TP - Two Post
X
X
Package Option
0 - None - Basic Control for Ram only
2 - Advanced Ram and Pump Controls
X
X
X
X
X
5
S
23
04
TP
By delivering a smooth, continuous bead of the proper size,
an ARO system helps the operator maintain both production
rate and produce high quality standards. Maintained quality
standards assures that the material benefi ts are realized. To
further maximize operator production time, the ARO sys-
tem has a built-in lift / ram feature for quick and easy drum
changeover and easy lifting of the pump assembly from the
container.
ARO systems are totally enclosed, sealing the material in
the system from air and moisture, preventing premature
cure-out of the material. This allows for either continuous or
intermittent use of the system and allows the need for daily
system clean-up.
GENERAL DESCRIPTION
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 of 4 TP0423S5XXXXXXXX (en) A D E B C H F G OFF OFF ON ON INSTALLATION The TP0423S5XXXXXXXX Ram System comes completely assembled. Remove the unit from the crate and place on a level surface. Install the material hose and dispensing device as required. When the following instructions are obser...
TP0423S5XXXXXXXX (en) Page 3 of 4 9 10 2 1 3 4 PARTS LIST / TP0423S5XXXXXXXX Item Description (size) Qty Part No. 1 Muffl er (1) 94810 2 Pump Assembly (1) AF0423S1XXXXX 3 Two-Post Lift / Ram (1) RM0552S-XX 4 Follower Assembly (refer to description chart on page 1) (1) 5 Elbow (1” -11 1/2 NPT) (1) Y4...
Page 4 of 4 TP0423S5XXXXXXXX (en) PN 97999-1542 24.000” 22.000” 1.000” 1.500” 36.500” 41.943” 25.003” 61. 465” 99.215” (fully extended) 0.562” (4) places 39.500” DIMENSIONAL DATA Figure 4
