Ingersoll Rand PM15X-X-X-A02 - Manual

Ingersoll Rand PM15X-X-X-A02

Ingersoll Rand PM15X-X-X-A02 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – OPERATING AND SAFETY PRECAUTIONS
  • Page 3 – Verify correct model / configuration prior to installation.
  • Page 4 – SEAT OPTIONS; Service Kit; COMMON PARTS
  • Page 5 – FOR THE; LUBRICATION / SEALANTS; Lubriplate FML-2 is a white food grade petroleum grease.; Torque Sequence
  • Page 6 – AIR MOTOR PARTS; AIR MOTOR SECTION SERVICE; Air Motor Section Service is continued from Fluid Section repair.; PILOT VALVE DISASSEMBLY; pilot piston and other parts.; PILOT VALVE REASSEMBLY; LIPS MUST
  • Page 7 – PILOT VALVE; Figure 3
  • Page 8 – TROUBLE SHOOTING; Product discharged from exhaust outlet.; DIMENSIONAL DATA; Figure 4
Loading the manual

E

2010

CCN 15206188

(800)

495-0276

D

FAX (800)

892-6276

INGERSOLL RAND COMPANY LTD

209 NORTH MAIN STREET -- BRYAN, OHIO 43506

1-1/2” DIAPHRAGM PUMP

OPERATOR’S MANUAL

PM15X-X-X-A02

RELEASED:

1-7-04

REVISED:

5-12-10

(REV. 0

9

)

INCLUDING: OPERATION, INSTALLATION & MAINTENANCE

1:1 RATIO (METALLIC)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

SERVICE KITS

Refer to Model Description Chart to match the pump material options.
637389 for air section repair (see page 6).
637375-XX for fluid section repair (see page 4). NOTE: This kit also con-

tains several air motor seals which will need to be replaced.

637390-X major air valve assembly (see page 7).

PUMP DATA

Models

see Model Description Chart for “-XXX”.

. . . . . . . . . . . . .

Pump Type

Metallic Air Operated Double Diaphragm

. . . . . . . . . .

Material

see Model Description Chart.

. . . . . . . . . . . . .

Weight

PM15A-CSS-XXX-A02

62.40 lbs (28.30 kgs)

. . .

. . .

PM15R-CSS-XXX-A02

60.26 lbs (27.33 kgs)

. . .

PM15S-CSS-XXX-A02

78.40 lbs (35.56 kgs)

. . .

Maximum Air Inlet Pressure

120 p.s.i.g. (8.3 bar)

. . . . . . . . .

Maximum Material Inlet Pressure

10 p.s.i.g. (0.69 bar)

. . . . .

Maximum Outlet Pressure

120 p.s.i.g. (8.3 bar)

. . . . . . . . . .

Maximum Flow Rate

(

flooded inlet

)

123 g.p.m. (465.6 l.p.m.)

. . . .

Displacement / Cycle @ 100 p.s.i.g.

0.617 gal. (2.34 lit.)

. . .

Maximum Particle Size

1/4” dia. (6.4 mm)

. . . . . . . . . . . .

Maximum Temperature Limits (diaphragm / ball / seal material)

E.P.R. / EPDM

-60

_

to 280

_

F (-51

_

to 138

_

C)

. . . . . . . . . . .

Polypropylene

35

_

to 175

_

F (2

_

to 79

_

C)

. . . . . . . . . . .

Santoprene

R

-40

_

to 225

_

F (-40

_

to 107

_

C)

. . . . . . . . . . .

PTFE

40

_

to 225

_

F (4

_

to 107

_

C)

. . . . . . . . . . . . . . . . .

Dimensional Data

see page 8

. . . . . . . . . . . . . . . .

Mounting Dimension

9” x 11.75” (228.6 mm x 298.5 mm)

. . . . . . . .

Noise Level

@ 70 p.s.i., 60 c.p.m.

85.0 db(A)

{

. . . . .



The pump sound pressure levels published here have been updated to an Equivalent
Continuous Sound Level (L

Aeq

) to meet the intent of ANSI S1.13-1971, CAGI-PNEU-

ROP S5.1 using four microphone locations.

NOTICE: All possible options are shown in the chart, however, certain
combinations may not be recommended, consult a representative or the
factory if you have questions concerning availability

.

Figure 1

MODEL DESCRIPTION CHART

PM15 X - C S S - X X X - A02

PM15X - CSS - X X X - A02

637375 - X X

Diaphragm

Ball

FLUID SECTION SERVICE KIT SELECTION

EXAMPLE: Model # PM15S-CSS-SAA-A02
Fluid Section Service Kit # 637375-AA

Seat Material

A - Santoprene
S - 316 Stainless Steel

Diaphragm Material

A - Santoprene
M - Medical Grade Santoprene
T - PTFE / Santoprene

Ball Material

A - Santoprene
T - PTFE

Hardware Material

S - Stainless Steel

Fluid Caps & Manifold Material

S - Stainless Steel

Fluid Connection

C - Tri-clamp

Center Section Material

A - Aluminum
R - Polypropylene
S - Stainless Steel

www.ingersollrandproducts.com

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - OPERATING AND SAFETY PRECAUTIONS

PM15X-X-X-A02 Page 2 of 8 OPERATING AND SAFETY PRECAUTIONS READ, UNDERSTAND, AND FOLLOW THIS INFORMATION TO AVOID INJURY AND PROPERTY DAMAGE. EXCESSIVE AIR PRESSURESTATIC SPARK HAZARDOUS MATERIALSHAZARDOUS PRESSURE WARNING EXCESSIVE AIR PRESSURE. Can cause person- al injury, pump damage or property ...

Page 3 - Verify correct model / configuration prior to installation.

Page 3 of 8 PM15X-X-X-A02 GENERAL DESCRIPTION The ARO diaphragm pump offers high volume delivery even at low airpressure and a broad range of material compatibility options available.Refer to the model and option chart. ARO pumps feature stall resistantdesign, modular air motor / fluid sections.Air ...

Page 4 - SEAT OPTIONS; Service Kit; COMMON PARTS

MATERIAL CODE [A] = Aluminum [B] = Nitrile [C] = Carbon Steel [Co] = Copper[E] = E.P.R. [P] = Polypropylene [SP] = Santoprene[SPM]= Medical Grade Santoprene[SS] = Stainless Steel[T] = PTFE PM15X-X-X-A02 Page 4 of 8 PARTS LIST / PM15X-X-X-A02 FLUID SECTION L 637375-XX FLUID SECTION SERVICE KITS INCLU...

Other Ingersoll Rand Models