Ingersoll Rand MCH5-020 - Manual
Ingersoll Rand MCH5-020 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Safety Summary; WARNING; SAFETY INFORMATION; NOTICE; CAUTION; DANGER; SAFE OPERATING INSTRUCTIONS
- Page 3 – SPECIFICATIONS; Model Code Explanation
- Page 4 – WARNING TAG; INSTALLATION
- Page 5 – Initial Operating Checks; Follow all safety instructions when operating the hoist.; Hoist Operation; When facing the hand chain side of the hoist:; Storing the Hoist; Always store the hoist in a no load condition.; OPERATION
- Page 6 – Frequent Inspection; Periodic Inspection; NORMAL; yearly
- Page 7 – General; temperatures 30; LUBRICATION; Load Chain; Lubricate hook and hook latch pivot points.
- Page 8 – EQUIPMENT BEING REPAIRED.; Installing New Load Chain
- Page 9 – Remove “C” link and old chain.; Attaching End of Load Chain; Brake Adjustment; Remove all slack from the chain.; General Disassembly
- Page 10 – Remove all nicks and burrs caused by lockwashers.; Assembly; • The 1/2 ton hoist has a center pinion gear with only 5 teeth.
- Page 11 – Hand Chain Adjustment or Replacement
- Page 12 – HOIST ASSEMBLY PARTS DRAWING
- Page 13 – HOIST ASSEMBLY PARTS LIST
- Page 14 – Part number and part name as shown in manual.; Manual Chain Hoist; Return Goods Policy; For additional information contact:
- Page 15 – It is our policy to promote safe delivery of all orders.
Form MHD56028
Edition 7
October 1996
71049530
©
1996 Ingersoll-Rand Company
Form MHD56028
MCH5-005
MCH5-010
MCH5-015
1/2 ton
1 ton
1-1/2 ton
MCH5-020
MCH5-030
MCH5-050
2 ton
3 ton
5 ton
PARTS, OPERATION AND MAINTENANCE MANUAL
for
MANUAL CHAIN HOIST MODELS
Unless otherwise noted, tons in this manual are metric tons (2,200 lbs.)
READ THIS MANUAL BEFORE USING THESE PRODUCTS. This manual
contains important safety, installation, operation and maintenance
information. Make this manual available to all persons responsible for the
operation, installation and maintenance of these products.
WARNING
Do not use this hoist for lifting, supporting, or transporting people or lifting or supporting
loads over people.
Always operate, inspect and maintain this hoist in accordance with American National
Standards Institute Safety Code (ASME B30.16) and any other applicable safety codes and
regulations.
Refer all communications to the nearest Ingersoll-Rand Material Handling Office or
Distributor.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 The National Safety Council, Accident Prevention Manual forIndustrial Operations, Eighth Edition and other recognizedsafety sources make a common point: Employees who worknear cranes or assist in hooking on or arranging a load should beinstructed to keep out from under the load. From a safetystand...
3 6. Periodically, inspect the hoist thoroughly and replace wornor damaged parts. 7. Lubricate the hoist regularly. 8. Do not use hoist if hook latch has been sprung or broken. 9. Check that the hook latches are engaged before using. 10. Never splice a hoist chain by inserting a bolt between links.1...
4 WARNING TAG Each hoist is supplied from the factory with the safety tagshown. If the tag is not attached to your unit, order a new tagand install it. Refer to the parts list for the part number. Readand obey all warnings and other safety information attached tothis hoist. Tag may be shown smaller ...
