Ingersoll Rand LM2350E-XX-B - Manual
Ingersoll Rand LM2350E-XX-B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OPERATING AND SAFETY PRECAUTIONS; WARNING; PUMP RATIO X; NOTICE: Thermal expansion can occur when the fluid in the materi-
- Page 3 – TORQUE REQUIREMENTS; Figure 2
- Page 4 – PUMP DISASSEMBLY; and determine if any parts will need replacement.; PUMP REASSEMBLY; der nearest the exhaust hole.; TROUBLE SHOOTING; the pump system and clean out any obstructions in the inlet/outlet
OPERATOR’S MANUAL
LM2350E-X-B
RELEASED:
8-14-98
REVISED:
8
-1-
11
(REV.
L
)
CHOP-CHECK GREASE PUMP
3” AIR MOTOR
50:1 RATIO
0 - 7500 P.S.I. RANGE
INCLUDE MANUAL: S-633 GENERAL INFORMATION (PN 97999-625)
INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, PARTS, TROUBLESHOOTING
LM2350E-XX-B
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
•
Use only genuine ARO
R
replacement parts to assure compatible
pressure rating and longest service life.
•
637227-B Pump Rebuild Kit.
Includes the necessary soft parts for
normal service of the entire pump.
SPECIFICATIONS
Model Series
LM2350E-XX-B
. . . . . . . . . . . . . . . . . . . .
Type
Air Operated, Chop-Check
. . . . . . . . . . . . . . . . . . . . . . .
Grease Pump
Ratio
50:1
. . . . . . . . . . . . . . . . . . . . . . . . . .
Air Motor Diameter
3” (7.62 cm)
. . . . . . . . . . . . . . .
Stroke (Double Acting)
3” (7.62 cm)
. . . . . . . . . . .
Air Inlet
(female)
LM2350E-X1-B
1/4 - 18 N.P.T.F. - 1
. . . . . . . . . . . . . . .
LM2350E-X2-B
Rc 1/4 (1/4 - 19 BSP Taper)
. . . . . . . . . . . .
Material Outlet
(female)
LM2350E-X1-B
3/8 - 18 N.P.T.F. - 1
. . . . . . . . . . . . . . . . .
LM2350E-X2-B
Rc 3/8 (3/8” - 19 BSP Taper)
. . . . . . . . . . . . . .
Pump Construction
Carbon Steel
. . . . . . . . . . . . . . .
Dimensional Data
see chart
. . . . . . . . . . . . . . . .
Weight
see chart
. . . . . . . . . . . . . . . . . . . . . . . . .
PERFORMANCE
Air Inlet Pressure Range
0 - 150 p.s.i. (0 - 10.3 bar)
. . . . . . . . . . .
Fluid Pressure Range
0 - 7500 p.s.i. (0 - 517.2 bar)
. . . . . . . . . . .
Cycles / Minute Rec’d @ Working Flow
135
.
Displacement In
3
Per Cycle
0.875
. . . . . . . . .
Volume / Cycle
0.48 oz. (14.33 ml)
. . . . . . . . . . . . . . . . . . .
Cycles Per Lb.
30
. . . . . . . . . . . . . . . . . . .
Maximum Delivery / Min.
7.5 lbs (3.4 kg)
. . . . . . . . . . .
Noise Level @ 100 p.s.i.
85 db(A)*
. . . . . . . . . . . .
Accessories Available
61113 Wall Mount Bracket
. . . . . . . .
66073
-
1 Air Line Connection Kit
*
The pump sound pressure level has been updated to an Equivalent Continuous Sound
Level (L
Aeq
) to meet the intent of ANSI S1. 13-1971, CAGI-PNEUROP S5.1 using four
microphone locations.
GENERAL DESCRIPTION
Model LM2350E-X-B Series chop-check grease pump is intended to be
used primarily for grease delivery systems. It uses carbon steel and oth-
er materials which make it compatible with most petroleum based lu-
brication products.
NOTE: If this pump was purchased separately (not part of a system),
consult your sales representative for compatible dispensing accesso-
ries which will best match the application. All accessories must be able
to withstand the maximum pressure developed by the pump.
PUMP DATA
Figure 1
Air Inlet
(female)
See “Specifications”
MODEL LM2350E-XX-B
Material Outlet
(female)
See “Specifications”
MODEL
“A”
(mm)
“B”
(mm)
WEIGHT
(kg)
LM2350E-2X-B 27-3/8”
(695)
16-1/4”
(412.8)
18.0 lbs
(8.16)
LM2350E-3X-B 40-1/8”
(1019)
29”
(736.6)
22.72 lbs
(10.31)
LM2350E-4X-B 48-5/8”
(1235)
37-1/2”
(952.5)
25.76 lbs
(11.68)
LM2350E-6X-B 30-1/8”
(765)
19”
(482)
19.0 lbs
(8.62)
LM2350E-7X-B 38-3/8”
(795)
27-1/4”
(692)
22.07 lbs
(10.01)
LM2350E-8X-B 47-5/8”
(1210)
36-1/2”
(927)
25.39 lbs
(11.52)
NOTE:Dimensions are shown in inches and (mm), supplied for reference only and are typical-
ly rounded up to the nearest 1/16 inch.
2” N.P.S.M. Bung Adapter
(not included with LM2350E-6X-B)
5/16” (8 mm) Thru hole
‘‘B”
‘‘A”
1-1/4”
(31.8 mm)
IMPORTANT
This is one of two documents which support the pump. Replace-
ment copies of these forms are available upon request.
=
LM2350E-X-B
MODEL OPERATOR’S MANUAL
-
S-633
GENERAL INFORMATION LUBRICATION PISTON PUMPS
WARNING
READ THE GENERAL INFORMATION MANUAL
INCLUDED FOR ADDITIONAL OPERATING AND SAFETY PRE-
CAUTIONS AND OTHER IMPORTANT INFORMATION.
CCN 99762585
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 201
1
www.ingersollrandproducts.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
LM2350E-X-B Page 2 of 4 PARTS LIST / LM2350E-XX-B Item Description (size in inches) Qty Part No. [Mtl] Item Description (size in inches) Qty Part No. [Mtl] 1 Carriage Bolt (1/4” - 20 x 9” long) (4) 94333 [C] 2 Upper Cap (1) 94390 [Z] n 3 Track Gasket (2) 94392 [B] 4 Sleeve (2) 94316 [Br] n 5 “O” Rin...
LM2350E-X-B Page 3 of 4 PARTS LIST / LM2350E-XX-B 1 6 . TORQUE REQUIREMENTS , (11) 80 in. lbs (9 Nm) maximum (31) 80 in. lbs (9 Nm) minimum (34, 40, 56) 65 ft lbs (88.1 Nm) minimum (39) 17 - 25 ft lbs (23.0 - 33.9 Nm)(44) 50 - 70 ft lbs (67.8 - 94.9 Nm) (53) 70 - 100 in. lbs (7.9 - 11.3 Nm) 2 34 10 ...
LM2350E-X-B Page 4 of 4 PUMP DISASSEMBLY NOTE: All threads are right hand. Refer to figure 2 (page 3). Discon- nect air supply and relieve all system pressure prior to servicing. Carefully remove the parts, inspect for damage, nicks or excessive wear and determine if any parts will need replacement....
