Ingersoll Rand FH2 - Manual
Ingersoll Rand FH2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PARTS, OPERATION AND MAINTENANCE MANUAL; for; important; WARNING; applications. Do not lift or support loads over people.
- Page 4 – SAFETY INFORMATION; DANGER
- Page 5 – SAFE OPERATING INSTRUCTIONS; WARNING LABEL
- Page 59 – PARTS ORDERING INFORMATION; NOTICE
- Page 60 – WARRANTY; LIMITED WARRANTY
Form MHD56298
• A copy of our “Safe Operating Practices” Manuals are always available free of charge either by downloading it from our
Technical Publications website @ www.airwinch.com or by contacting the Factory at (800) 866-5457 for North America and
(206) 624-0466 for International. The Safe Operating Practices manual must be read prior to anyone operating a
Ingersoll-Rand
winch or hoist. The manual form numbers are as follows:
“Safe Operating Practices Non-Man Rider™ Winches” Manual, Form No. MHD56250
“Safe Operating Practices for Man Rider™ Winches” Manual, Form No. MHD56251
“Safe Operating Practices for Pneumatic, Hydraulic and Electric Hoists” Manual, Form No. MHD56295
• Available winch options may require additional supplements to the basic winch manual.
• For Man Rider™ winches ensure a copy of the Man Rider™ supplement is made available to the operator prior to winch
operation.
• We strongly recommend that ALL maintenance on
Ingersoll-Rand
equipment be carried out by personnel certified by
Ingersoll-Rand
, or by
Ingersoll-Rand
Authorized Service Centers.
• Contact the Factory if in doubt about installation, operation, inspection and maintenance instructions.
• Use only Genuine
Ingersoll-Rand
parts when maintaining or repairing a winch, hoist or any component of a winch or hoist.
• ANSI / ASME recommends that a winch or hoist (or any components of a winch or hoist) that has been repaired be tested
prior to being placed into service:
Winch Man Rider
™
Supplements:
Model:
Publication No.
Model:
Publication No.
FA2, FA2.5,
FH2, FH2.5
MHD56046
LS500RLP
SAM0011
LS1000RLP
SAM0012
FA5
MHD56042 and
MHD56220
LS150RLP
SAM0082
LS150RLP/500/
1000
SAM0115
FA10
MHD56252
FA2.5A MHD56236
LS150RLP and
LS150PLP-PH
SAM0120
FA2B and
HU40A
MHD56207
LS500RLP-E
SAM0122
FH10MR
MHD56212
LS150RLP-
DP5M-F
SAM0184
Fulcrum Electric
MHD56277
LS500HLP/
LS1000HLP
SAM0004
LS150HLP
SAM0222
*
Winches -
ANSI / ASME B30.7 (BASE MOUNTED DRUM HOISTS) Refer to section 7.2.2 - Testing.
*
Hoists -
ANSI / ASME B30.16 (OVERHEAD HOISTS - UNDERHUNG) Refer to section 16.2.2 - Testing.
Form MHD56298
Edition 2
November 2004
71441844
©
2004 Ingersoll-Rand Company
IMPORTANT INFORMATION:
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Form MHD56040 PARTS, OPERATION AND MAINTENANCE MANUAL MODELS FA2 AND FA2.5 for Form MHD56040 Edition 3May 200671072060 © 2006 Ingersoll Rand Company READ THIS MANUAL BEFORE USING THESE PRODUCTS. This manualcontains important safety, installation, operation and maintenance information. Make this manu...
3 SAFETY INFORMATION This manual provides important information for all personnelinvolved with the safe installation, operation and propermaintenance of this product. Even if you feel you are familiarwith this or similar equipment, you should read this manualbefore operating the winch. Danger, Warni...
4 SAFE OPERATING INSTRUCTIONS The following warnings and operating instructions have beenadapted in part from American Society of Mechanical Engineers(Safety) Standard ASME B30.7 and are intended to avoid unsafeoperating practices which might lead to injury or propertydamage. Ingersoll Rand recogniz...
