Ingersoll Rand AF0646SXXXXXX-XX-X - Manual
Ingersoll Rand AF0646SXXXXXX-XX-X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PUMP OPTION DESCRIPTION CHART; Pump Model; Spring Type; Plunger Type; Air Motor Option; DIMENSIONS; TOP VIEW; C Material outlet; equally spaced; Air Inlet
- Page 3 – GENERAL DESCRIPTION; HAZARDOUS PRESSURE. Do not exceed maxi-; Pump Ratio X; Refer to general information sheet for additional; TROUBLE SHOOTING; Pump cycles but does not deliver material.; Lower Pump Piston Rod; Figure 2; REASSEMBLY
- Page 4 – PERFORMANCE CURVES; LITERS PER MINUTE WATER DELIVER; CYCLE PER MINUTE
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276
FAX (800) 892-6276
© 2010
CCN 15333974
www.ingersollrandproducts.com
OPERATOR’S MANUAL & SALES AND ENGINEERING DATA
INCLUDING: SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING.
INCLUDE MANUALS: AF06XX-XX Air Motor (pn 97999-1467), 66266-XXX-B Lower Pump End (pn 97999-829)
& S-632 General Information Manual (pn 97999-624).
RELEASED:
9
-
30-
10
(REV. 01)
AF0646SXXXXXX-XX-X
EXTRUSION PUMP SERIES
Carbon Steel
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
6” AIR MOTOR
46:1 RATIO
6” STROKE
SERVICE KITS
Use only genuine ARO® replacement parts to assure compat-
ible pressure rating and longest service life.
637489
for repair of air motor section.
637074-X43-B
for repair of lower pump end. Refer to the chart
on page 2 for description of -X43 options.
SPECIFICATIONS
Model Series
(refer to option chart)
. . . . . . . . . . . AF0646SXXXXXX-XX-X
Pump Type
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air Operated, Extrusion
Double Acting Pump
Ratio
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46:1
Air Motor
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AF0660-XX
Motor Repair Kit
. . . . . . . . . . . . . . . . . . . . . . . 637489
Motor Diameter
. . . . . . . . . . . . . . . . . . . . . . . 6” (15.2 cm)
Stroke (double acting)
. . . . . . . . . . . . . . . . . 6” (15.2 cm)
Air Inlet
(female) . . . . . . . . . . . . . . . . . . . . . . . 1/2 - 14 N.P.T.F. - 1
Air Exhaust
(female). . . . . . . . . . . . . . . . . . . . 1-1/4 - 11-1/2 N.P.T.F. - 1
Lower Pump End Series
. . . . . . . . . . . . . . . . . . 66266-X43-B
Lower Pump Repair Kit
. . . . . . . . . . . . . . . . 637074-X43-B
Material Outlet
(female) . . . . . . . . . . . . . . . 1 - 11-1/2 N.P.T.F. - 1
Weight
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 lbs (30.4 kgs)
PUMP PERFORMANCE
Air Inlet Pressure Range
. . . . . . . . . . 0 - 150 p.s.i.g. (0 - 10.3 bar)
Fluid Pressure Range
. . . . . . . . . . . . . . . 0 - 7485 p.s.i.g. (0 - 516.2 bar)
Maximum Rec'd Cycles / Minute
. . . . . . . . . 60
Displacement In.³ Per Cycle
. . . . . . . . . . . . . . . . 6.97
Volume / Cycle
. . . . . . . . . . . . . . . . . . . . . . . . . . . 3.9 oz. (114.2 ml)
Cycles Per Gallon
. . . . . . . . . . . . . . . . . . . . . . . . 33.1
Flow @ 60 Cycles / Minute
. . . . . . . . . . . . . . . . 1.8 g.p.m. (6.9 l.p.m.)
Noise Level @ 60 p.s.i. - 40 c.p.m.
. . . . . . 84.7 db(A)*
*
The pump sound pressure level has been updated to an Equivalent Continuous
Sound Level (LAeq) to meet the intent of ANSI S1.13-1971, CAGI-PNEUROP S5.1
using four microphone locations.
PUMP DATA
IMPORTANT
This is one of four documents which support the pump. Re-
placement copies of these forms are available upon request.
A F 0 6 4 6 S XXXXXX-XX-X
M o d e l O p e r a t o r ’s M a n u a l ( p n
97999-1508)
S-632
General Information - Industrial Piston Pumps (pn
97999-624)
66266-XXX-B
Lower Pump End Operator’s Manual (pn 97999-829)
AF06XX-XX
Air Motor Operator’s Manual (pn 97999-1467)
Figure 1
MODEL AF0645SXXXXX-XX-X
NOTE: Dimensions are shown in inches and (mm) and are supplied for reference only.
“A”
(for -1 model)
(mm)
“B”
(mm)
“C”
(mm)
51.924”
(1318.9)
54.009”
(1371.8)
30.736"
(780.7)
17.736"
(450.5)
30.736"
(780.7)
17.736"
(450.5)
Air Inlet (female)
1/2 - 14 N.P.T.F. - 1
Material Outlet (female)
1 - 11-1/2 N.P.T.F. - 1
AF0660-XX Air Motor
(see manual AF06XX-XX)
66266-X43-B Lower Pump
(see manual 66266-XXX-B)
Spacer Section
Y85-29-C Nut (3)
Connector (see figure 2)
“B”
“A”
“C”
“B”
“A”
“C”
92028 Spacer Rod (3)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 of 4 AF0646SXXXXXX-XX-X (en) PUMP OPTION DESCRIPTION CHART Pump Model Lower Pump End Lower End Repair Kit Packing Material: AF0646S11XXXX-X Air Motor Option Plunger Type Spring Type Lower Packing Material Upper Packing Material 66266 -X43 Packing Material 637074-X43 Packin...
AF0646SXXXXXX-XX-X (en) Page 3 of 4 GENERAL DESCRIPTION The chop-check pumps are primarily designed for the pumping of heavy viscous material with or without fibrous content. The models can be used with a gravity feed single post lift as a topper type assembly or with a two post lift as a force feed...
Page 4 of 4 AF0646SXXXXXX-XX-X (en) PN 97999-1508 PERFORMANCE CURVES 0 2 4 6 8 0 62.5 125 187.5 250 0 62.5 125 187.5 250 0 1000 2000 3000 4000 5000 6000 BA C KP R ES SU R E (P SI ) 0 50 100 150 200 250 300 AI R C O N SU M PT IO N ( S C FM ) 40 PSI 70 PSI 100 PSI 120 PSI 40 PSI 70 PSI 100 PSI 120 PSI...
