Ingersoll Rand 99828618 - Manual
Ingersoll Rand 99828618 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OPERATING AND SAFETY PRECAUTIONS; = H a z a rd s o r u n s a fe p ra c t i ce s w h i c h; OPERATING INSTRUCTIONS; TYPICAL SYSTEM INSTALLATION; Figure 2
- Page 3 – WARNING; EXCESSIVE AIR PRESSURE. Can cause pulsation; CAUTION; Operating
- Page 4 – COMMON PARTS
- Page 5 – Figure 3; Torque Sequence
- Page 6 – Figure 4; TROUBLE SHOOTING; No dampening eff ect or erratic performance.; Check for diaphragm rupture.; TYPICAL CROSS SECTION
- Page 7 – DIMENSIONAL DATA; Figure 5
CCN 99828618
OPERATOR’S MANUAL
SB30X-XXX-X
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
RELEASED: 2-18-00
REVISED: 5-27-10
(REV. G)
3" SHOCK BLOCKER®
METALLIC PULSATION DAMPENER
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Refer to the Model Description Chart to match the pump material
options.
637330-3X for repair of the diaphragms and “O” rings (see page 4).
PUMP DATA
Models
. . . . . . . . . . . . . . . . . see Model Description Chart for “-XXX-X”
Pulsation Dampener Type
. . . . . . . . . . . . . Metallic
Material
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . see Model Description Chart
Weight
. . . . SB30X-XAX-X . . . . . . . . . . . . . . 41 lbs (18.6 kgs)
SB30X-XCX-X . . . . . . . . . . . . . . 94 lbs (42.6 kgs)
SB30X-XSX-X . . . . . . . . . . . . . . . 96 lbs (43.5 kgs)
Material Inlet / Outlet
SB30X-AXX-X . . . . . . . . . . . . . . 3 - 8 N.P.T.F. - 1
SB30X-BXX-X . . . . . . . . . . . . . . Rp 3 (3 - 11 BSP parallel)
Air Inlet
(female) . . . . . . . . . . . . . . . . . . . . . . . 3/4 - 14 N.P.T.
Maximum Air Inlet Pressure
. . . . . . . . . . . 120 p.s.i.g. (8.3 bar)
Maximum Material Inlet Pressure
. . . . . . 120 p.s.i.g. (8.3 bar)
Maximum Temperature Limits (diaphragm / seal material)
E.P.R. / EPDM . . . . . . . . . . . . . . . . . . . . -60° to 280° F (-51° to 138° C)
Nitrile . . . . . . . . . . . . . . . . . . . . . . . . . . . 10° to 180° F (-12° to 82° C)
Santoprene® . . . . . . . . . . . . . . . . . . . . -40° to 225° F (-40° to 107° C)
PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40° to 225° F (4° to 107° C)
Viton® . . . . . . . . . . . . . . . . . . . . . . . . . . . -40° to 350° F (-40° to 177° C)
Maximum Fluid Volume
. . . . . . . . . . . . . . . 367 in.3 (6.01 lit.)
Dimensional Data
. . . . . . . . . . . . . . . . . . . . . . see page 7
NOTICE: All possible options are shown in the chart, however, certain
combinations may not be recommended, consult a representative or
the factory if you have questions concerning availability.
MODEL DESCRIPTION CHART
SB30 X - X X X - X
Air Section Material
A - Aluminum
S - Stainless Steel
Fluid Connection
A - 3 - 8 N.P.T.F. - 1
B - Rp 3 (3 - 11 BSP, parallel)
Fluid Section Service Kit Selection
EXAMPLE: Model #SB30A-BAP-G
Fluid Section Service Kit # 637330-3G
SB30X - XXX - X
Diaphragm
637330 - 3 X
Fluid Cap Material
A - Aluminum
C - Cast Iron
S - Stainless Steel
Diaphragm Material
A - Santoprene
G - Nitrile
T - PTFE / Santoprene
V - Viton
Hardware Material
P - Carbon Steel
S - Stainless Steel
Figure 1
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276
FAX
(800) 892-6276
© 2010
www.ingersollrandproducts.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 of 8 SB30X-XXX-X (en) WARNING EXPLOSION HAZARD. Do not exceed maximum fl uid inlet pressure of 120 p.s.i. (8.3 bar). Operating at higher pressure can cause explosion, resulting in property damage or severe injury. WARNING USE ONLY WITH COMPRESSED AIR. Do not use bottled gas products to run th...
SB30X-XXX-X (en) Page 3 of 8 y Viton® is registered trademarks of the DuPont Company y Santoprene® is a registered trademark of Monsanto Company, licensed to Advanced Elastomer Systems, L.P. y y Lubriplate® is a registered trademark of Lubriplate Division (Fiske Brothers Refi ning Company) y ARO® an...
Page 4 of 8 SB30X-XXX-X (en) PARTS LIST / SB30X-XXX-X Indicates parts included in 637330-3X service kit. Service kit also includes 94276 Lubriplate FML-2 grease packet. MATERIAL CODE [A] = Aluminum [B] = Nitrile [Br] = Brass[Bz] = Bronze[C] = Carbon Steel [CI] = Cast Iron [Co] = Copper[D] = Acetal...
