Ingersoll Rand 670106 - Manual
Ingersoll Rand 670106 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OPERATING AND SAFETY PRECAUTIONS
- Page 3 – OPERATING INSTRUCTIONS; GENERAL DESCRIPTION
- Page 4 – PARTS LIST; FLUID SECTION DISASSEMBLY; Be sure to torque both sides.
- Page 5 – ASSEMBLY TORQUE REQUIREMENTS; ALL FASTENERS ARE METRIC.; LUBRICATION / SEALANTS; Torque Sequence
- Page 6 – Indicates parts included in 637421 air section repair kit.; AIR MOTOR SECTION SERVICE; LIPS
- Page 8 – TROUBLE SHOOTING; Product discharged from exhaust outlet.; DIMENSIONAL DATA; Figure 4; DIMENSIONS
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276
y
FAX (800) 892-6276
© 2010
CCN 15337918
www.ingersollrandproducts.com
OPERATOR’S MANUAL
670106
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
RELEASED: 3-30-10
(REV. 01)
3" DIAPHRAGM PUMP
1:1 RATIO, METALLIC
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Refer to Model Description Chart to match the pump mate-
rial options.
637421 for air section repair (see page 6).
637303-TA for fl uid section repair (see page 4).
PUMP DATA
Models
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 670106
Pump Type
. . . . . . . . . . . . . . . Air Operated Double Diaphragm
Material
. . . . . . . . . . . . . . . . . . see Model Description Chart
Weight
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 245.60 lbs (111.4 kgs)
Maximum Air Inlet Pressure
. . . . . . . . 120 p.s.i.g. (8.3 bar)
Maximum Material Inlet Pressure
. . . 10 p.s.i.g. (0.69 bar)
Maximum Outlet Pressure
. . . . . . . . . . 120 p.s.i.g. (8.3 bar)
Maximum Flow Rate
. . . . . . . . . . . . . . . . 237 g.p.m. (897 l.p.m.)
(fl ooded inlet)
. . . . . . . . . . . . . . . 275 g.p.m. (1041 l.p.m.)
Displacement / Cycle @ 100 p.s.i.g.
. 2.8 gal. (10.6 lit.)
Maximum Particle Size
. . . . . . . . . . . . . 3/8” dia. (9.5 mm)
Maximum Temperature Limits (diaphragm / ball / seal /
seat material)
Santoprene® . . . . . . . . . . . . . . -40° to 225° F (-40° to 107° C)
PTFE. . . . . . . . . . . . . . . . . . . . . . 40° to 225° F (4° to 107° C)
Dimensional Data
. . . . . . . . . . . . . . . . . . . see page 8
Noise Level
@ 70 p.s.i., 50 c.p.m.
c
. . . 83.0 db(A)
d
c
Tested with 67263 muffler assembly installed.
d
The pump sound pressure levels published here have been updated to
an Equivalent Continuous Sound Level (L
Aeq
) to meet the intent of ANSI
S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.
MODEL DESCRIPTION CHART
Air Motor / Air Cap Material
Aluminum / Aluminum
Fluid Connection
3" A.N.S.I / DIN Flange
Fluid Cap & Manifold Material
Stainless
Steel
Hardware Material
Stainless
Steel
Seat Material
316 Stainless Steel
Ball Material
PTFE
Diaphragm Material
Santoprene
Figure 1
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 of 8 670106 (en) WARNING EXCESSIVE AIR PRESSURE. Can cause per- sonal injury, pump damage or property damage.Do not exceed the maximum inlet air pressure as stated on the pump model plate.Be sure material hoses and other components are able to withstand fluid pressures developed by this pump....
670106 (en) Page 3 of 8 y Loctite® is a registered trademark of Henkel Loctite Corporation y ARO® is a registered trademark of Ingersoll-Rand Company y 262™, 271™ and 572™ are trademarks of the DuPont Company y y Santoprene® is a registered trademark of Monsanto Company, licensed to Advanced Elastom...
Page 4 of 8 670106 (en) PARTS LIST / 670106 FLUID SECTION 637303-TA fl uid section service kits include: Balls (item 22), diaphragms (item 7) plus items 19, 70, 144, 175 (listed below) plus 174 and 94276 Lubriplate® FML-2 grease (page 6). MATERIAL CODE [A] = Aluminum [B] = Nitrile [C] = Carbon Ste...
