Ingersoll Rand 670042 - Manual

Ingersoll Rand 670042

Ingersoll Rand 670042 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – OPERATING AND SAFETY PRECAUTIONS; = H a z a rd s o r u n s a fe p ra c t i ce s w h i c h
  • Page 3 – GENERAL SERVICE NOTES:; WARNING; EXCESSIVE AIR PRESSURE. Can cause pump dam-
  • Page 4 – MATERIAL CODE; FLUID SECTION PARTS LIST; TYPICAL CROSS SECTION; Figure 2
  • Page 5 – Apply gasolene-resistant pipe sealant to threads.; Figure 3; COLOR CODE; Torque Sequence
  • Page 6 – Indicates parts included in 637428 air section repair kit.; AIR MOTOR SECTION SERVICE; Air Motor Section service is continued from Fluid Section repair.; PILOT VALVE DISASSEMBLY; LIPS; AIR MOTOR PARTS LIST; np
  • Page 7 – Apply Lubriplate FML-2 grease to all “O” rings, “U” cups and
  • Page 8 – TROUBLE SHOOTING; Product discharged from air exhaust.; DIMENSIONAL DATA; Figure 5; DIMENSIONS
Loading the manual

OPERATOR’S MANUAL

670042

INCLUDING: OPERATION, INSTALLATION & MAINTENANCE

RELEASED: 1-25-07
REVISED: 8-27-08
(REV. 02)

1/2" DIAPHRAGM PUMP

U.L. LISTED, 1:1 RATIO (METALLIC)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.

INGERSOLL RAND COMPANY LTD

P.O. BOX 151

y

ONE ARO CENTER

y

BRYAN, OHIO 43506-0151

(800) 276-4658

y

FAX (800) 266-7016

© 2008

CCN 15260748

fl uids.ingersollrand.com

SERVICE KITS

637448 for fl uid section repair (see page 4).
637428 for air section repair (see page 6).

PUMP DATA

Models

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 670042

Application

. . . . . . . . . . . . . . . Diesel Fuel, Kerosene, Aviation Fuel,

Fuel Oil and Unleaded Fuel.

Pump Type

. . . . . . . . . . . . . . . . U. L . L i s t e d M e t a l l i c A i r O p e r a t e d

Double Diaphragm for use with Pe-
troleum Product Dispensing Systems

Material

. . . . . . . . . . . . . . . . . . . see Model Description Chart

Weight

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.36 lbs (4.70 kgs)

Maximum Air Inlet Pressure

. . . . . . . . . . . 50 p.s.i.g. (3.4 bar)

Maximum Material Inlet Pressure

. . . . . . 10 p.s.i.g. (0.69 bar)

Maximum Outlet Pressure

. . . . . . . . . . . . . 50 p.s.i.g. (3.4 bar)

Air Consumption

@ 40 p.s.i. . . . . . . . . . . . . . 1 c.f.m. / gallon (approx.)

Maximum Flow Rate

(fl ooded inlet)

. . . . . 12.0 g.p.m. (45.4 l.p.m.)

Displacement / Cycle @ 100 p.s.i.g.

. . . . 0.039 gal. (0.15 lit.)

Maximum Particle Size

. . . . . . . . . . . . . . . . 3/32” dia. (2.4 mm)

Maximum Temperature Limits (diaphragm / ball / seat mate-

rial)

Viton® . . . . . . . . . . . . . . . . . . . . . . . . . -40° to 350° F (-40° to 177° C)

Dimensional Data

. . . . . . . . . . . . . . . . . . . . . . see page 8

Noise Level

@ 70 p.s.i., 60 c.p.m. . . . . . . . . . 75.0 db(A)

c

c

The pump sound pressure levels published here have been updated to

an Equivalent Continuous Sound Level (L

Aeq

) to meet the intent of ANSI

S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.

MODEL DESCRIPTION CHART

Center Section Material

Aluminum

Fluid Connection

1/2 - 14 N.P.T.F. - 1

Fluid Cap & Manifold Material

Aluminum

Hardware Material

Stainless

Steel

Seat Material

Aluminum

Ball Material

Viton

Diaphragm Material

Viton

Figure 1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - OPERATING AND SAFETY PRECAUTIONS; = H a z a rd s o r u n s a fe p ra c t i ce s w h i c h

Page 2 of 8 670042 (en) WARNING EXCESSIVE AIR PRESSURE. Can cause personal injury, pump damage or property damage.Do not exceed the maximum inlet air pressure as stated on the pump model plate.Be sure material hoses and other components are able to withstand fl uid pressures developed by this pump. ...

Page 3 - GENERAL SERVICE NOTES:; WARNING; EXCESSIVE AIR PRESSURE. Can cause pump dam-

670042 (en) Page 3 of 8 y Viton® is a registered trademark of the DuPont Company y Loctite® and 242® are registered trademarks of Henkel Loctite Corporation y y Lubriplate® is a registered trademark of Lubriplate Division (Fiske Brothers Refi ning Company) y ARO® is a registered trademark of Ingerso...

Page 4 - MATERIAL CODE; FLUID SECTION PARTS LIST; TYPICAL CROSS SECTION; Figure 2

Page 4 of 8 670042 (en) PARTS LIST / 670042 FLUID SECTION n 637448 Fluid Section Service Kits include: 22 balls, 7 diaphragms, and item 19 (listed below) plus items 144, 174 and 94276 Lubri- plate FML-2 grease (page 6). MATERIAL CODE [A] = Aluminum [Br] = Brass [GFN] = Glass Filled Nylon[SS] = Stain...

Other Ingersoll Rand Models