Ingersoll Rand 66M150-XXX-C - Manual
Ingersoll Rand 66M150-XXX-C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OPERATING AND SAFETY PRECAUTIONS
- Page 3 – WARNING
- Page 4 – MATERIAL CODE; SEAT OPTIONS
- Page 5 – Apply Loctite® 271TM to threads.; Torque Sequence; Cross section view of diaphragm.; COLOR CODE
- Page 6 – AIR MOTOR SECTION SERVICE; NOTE: Be careful to orient spacer legs; AIR MOTOR PARTS; Indicates parts included in 637118-C air section service kit.
- Page 7 – LEGS
- Page 8 – TROUBLE SHOOTING; Product discharged from exhaust outlet.; DIMENSIONAL DATA; Figure 5; DIMENSIONS
I
NGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 276-4658
y
FAX (800) 266-7016
© 2010
CCN 15321524
www.ingersollrandproducts.com
OPERATOR’S MANUAL
66M150-XXX-C
66M170-XXX-C
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
RELEASED: 11-3-08
REVISED:
8
-
25
-10
(REV. 0
5
)
1-1/2" DIAPHRAGM PUMP
1:1 RATIO, METALLIC
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
The original language of this manual is English.
SERVICE KITS
Refer to Model Description Chart to match the pump mate-
rial options.
637118-C for air section repair (see page 6).
637469-XX for fl uid section repair (see page 4).
PUMP DATA
Models
. . . . . . . . . . . see Model Description Chart for “-XXX”
Pump Type
. . . . . . . Metallic Air Operated Double Diaphragm
Material
. . . . . . . . . . see Model Description Chart
Weight
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55.53 lbs (25.19 kgs)
Maximum Air Inlet Pressure
. . . . . . . . 120 p.s.i.g. (8.3 bar)
Maximum Material Inlet Pressure
. . . 10 p.s.i.g. (0.69 bar)
Maximum Outlet Pressure
. . . . . . . . . . 120 p.s.i.g. (8.3 bar)
Maximum Flow Rate
(fl ooded inlet)
. . . 80 g.p.m. (302.8 l.p.m.)
Displacement / Cycle @ 100 p.s.i.g.
. 0.46 gal. (1.74 lit.)
Maximum Particle Size
. . . . . . . . . . . . . 1/2” dia. (12.7 mm)
Maximum Temperature Limits (diaphragm / ball / seal
material)
E.P.R. . . . . . . . . . . . . . . . . . . . . . -60° to 280° F (-51° to 138° C)
Hytrel® . . . . . . . . . . . . . . . . . . . -20° to 150° F (-29° to 66° C)
Nitrile . . . . . . . . . . . . . . . . . . . . 10° to 180° F (-12° to 82° C)
Santoprene® . . . . . . . . . . . . . . -40° to 225° F (-40° to 107° C)
PTFE. . . . . . . . . . . . . . . . . . . . . . 40° to 225° F (4° to 107° C)
Viton® . . . . . . . . . . . . . . . . . . . . -40° to 350° F (-40° to 177° C)
Dimensional Data
. . . . . . . . . . . . . . . . . . . see page 8
Noise Level
@ 70 p.s.i., 60 c.p.m.
c
. . . 77.7 db(A)
d
Noise Level
@ 70 p.s.i., 60 c.p.m.
e
. . . 107.0 db(A)
d
c
Tested with 93139 muffler assembly installed.
d
The pump sound pressure levels published here have been updated to
an Equivalent Continuous Sound Level (L
Aeq
) to meet the intent of ANSI
S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.
e
Tested with 97117 housing and 97114 ball installed. Hearing protection
is recommended when operating this product.
NOTICE: All possible options are shown in the chart, however,
cer tain combinations may not be recommended, consult a
representative or the factory if you have questions concerning
availability.
Figure 1
MODEL DESCRIPTION CHART
66M1 X 0 - X X X - C
Center Body Material / Fluid Connection
5 - Aluminum / 1-1/2 - 11-1/2 NPTF - 1
7 - Aluminum / Rp 1-1/2 (1-1/2 - 11 BSP parallel)
Ball Material
2 - Nitrile
C - Hytrel
E - Santoprene
Example: Model #66M150-1EB-C
Fluid Section Service Kit # 637469-EB
66M1X0 - X X X - C
Ball Diaphragm
637469 - X X
Fluid Cap & Manifold Material / Hardware
0 - Aluminum / Carbon steel
Diaphragm Material
2 - Nitrile
9 - Hytrel
B - Santoprene
Seat Material
1 - Aluminum
Fluid Section Service Kit Selection
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 of 8 66M150-XXX-C (en) WARNING EXCESSIVE AIR PRESSURE. Can cause per- sonal injury, pump damage or property damage.Do not exceed the maximum inlet air pressure as stated on the pump model plate.Be sure material hoses and other components are able to withstand fl uid pressures developed by thi...
66M150-XXX-C (en) Page 3 of 8 y Viton®and Hytrel® are registered trademarks of the DuPont Company y Loctite® is a registered trademark of Henkel Loctite Corporation y y Santoprene® is a registered trademark of Monsanto Company, licensed to Advanced Elastomer Systems, L.P. y ARO® is a registered trad...
Page 4 of 8 66M150-XXX-C (en) PARTS LIST / 66M150-XXX-C FLUID SECTION n 637469-XX Fluid section service kit includes: Balls (see Ball Option, refer to -XX in chart below), Diaphragms (see Diaphragm Option, refer to -XX in chart below) and items 2, 3, 9 and 19 (listed below) plus 93706-1 Key-Lube gre...
