Ingersoll Rand 666250-XXX-C - Manual
Ingersoll Rand 666250-XXX-C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OPERATING AND SAFETY PRECAUTIONS; WARNING; CAUTION; = Hazards or unsafe practices which; NOTICE; = Important installation, operation or
- Page 3 – EXCESSIVE AIR PRESSURE. Can cause pump dam-
- Page 4 – MATERIAL CODE; COMMON PARTS
- Page 5 – Apply Key-Lube grease to all “O” rings, “U” cups and mating; Figure 2; COLOR CODE; Torque Sequence; PTFE; Cross section view of diaphragms
- Page 6 – AIR MOTOR SECTION SERVICE; NOTE: Be careful to orient spacer legs; AIR MOTOR PARTS; Indicates parts included in 637434 air section service kit.
- Page 7 – LEGS
- Page 8 – TROUBLE SHOOTING; Product discharged from exhaust outlet.; DIMENSIONAL DATA; Figure 5; DIMENSIONS
INGERSOLL RAND COMPANY LTD
P.O. BOX 151
y
ONE ARO CENTER
y
BRYAN, OHIO 43506-0151
(800) 276-4658
y
FAX (800) 266-7016
© 2010
CCN 15242647
www.ingersollrandproducts.com
OPERATOR’S MANUAL
666250-XXX-C
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
RELEASED: 3-13-06
REVISED: 5-5-10
(REV. 07)
2" DIAPHRAGM PUMP
1:1 RATIO (METALLIC)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
The original language of this manual is English.
SERVICE KITS
Refer to Model Description Chart to match the pump material op-
tions.
637434 for air section repair (see page 6).
637432-XX for fl uid section repair (see page 4).
PUMP DATA
Models
. . . . . . . . . . . . . . . . . see Model Description Chart for “-XXX”
Pump Type
. . . . . . . . . . . . . Metallic Air Operated Double Diaphragm
Material
. . . . . . . . . . . . . . . . see Model Description Chart
Weight
. . . . . .
6662X0-XXX-C . . . . . . . . . . . .
65.15 lbs (29.55 kgs)
6662X1-XXX-C . . . . . . . . . . . .
129.93 lbs (58.94 kgs)
6662X2-XXX-C . . . . . . . . . . . .
124.30 lbs (56.38 kgs)
6662XA-XXX-C . . . . . . . . . . .
65.15 lbs (29.55 kgs)
6662XB-XXX-C . . . . . . . . . . .
129.93 lbs (58.94 kgs)
6662XC-XXX-C . . . . . . . . . . .
124.30 lbs (56.38 kgs)
Maximum Air Inlet Pressure
. . . . . . . . . . . 120 p.s.i.g. (8.3 bar)
Maximum Material Inlet Pressure
. . . . . . 10 p.s.i.g. (0.69 bar)
Maximum Outlet Pressure
. . . . . . . . . . . . . 120 p.s.i.g. (8.3 bar)
Maximum Flow Rate (fl ooded inlet)
. . . 172 g.p.m. (651.0 l.p.m.)
Maximum Particle Size
. . . . . . . . . . . . . . . . 1/4” dia. (6.4 mm)
Maximum Temperature Limits (diaphragm / ball / seal / seat
material)
E.P.R. / EPDM . . . . . . . . . . . . . . . . . . . -60° to 280° F (-51° to 138° C)
Hytrel® . . . . . . . . . . . . . . . . . . . . . . . . . -20° to 150° F (-29° to 66° C)
Kynar® PVDF . . . . . . . . . . . . . . . . . . . 10° to 200° F (-12° to 93° C)
Nitrile . . . . . . . . . . . . . . . . . . . . . . . . . . 10° to 180° F (-12° to 82° C)
Santoprene® . . . . . . . . . . . . . . . . . . . -40° to 225° F (-40° to 107° C)
PTFE . . . . . . . . . . . . . . . . . . . . . . . . . . . 40° to 225° F (4° to 107° C)
Viton® . . . . . . . . . . . . . . . . . . . . . . . . . . -40° to 350° F (-40° to 177° C)
Dimensional Data
. . . . . . . . . . . . . . . . . . . . . . see page 8
Noise Level
@ 70 p.s.i., 60 c.p.m.
c
. . . . . . 85.3 db(A)
d
c
Tested with 94810 muffl
er assembly installed.
d
The pump sound pressure levels published here have been updated to
an Equivalent Continuous Sound Level (L
Aeq
) to meet the intent of ANSI
S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.
NOTICE: All possible options are shown in the chart, however, certain
combinations may not be recommended, consult a representative or
the factory if you have questions concerning availability.
Figure 1
MODEL DESCRIPTION CHART
6662 X X - X X X - C
Center Body Material / Fluid Connection
5 - Aluminum / 2 - 11-1/2 NPTF - 2
7 - Aluminum / Rp 2 (2 - 11 BSP parallel)
Ball Material
2 - Nitrile
C - Hytrel
4 - PTFE
E - Santoprene
A - 316 Stainless Steel
Example: Model #666250-1EB-C
Fluid Section Service Kit # 637432-EB
6662XX - X X X - C
Ball Diaphragm
637432 - X X
Fluid Cap & Manifold Material / Hardware
0 - Aluminum / Carbon steel
1 - Stainless Steel / Carbon Steel
2 - Cast Iron / Carbon Steel
A - Aluminum / Stainless Steel
B - Stainless Steel / Stainless Steel
C - Cast Iron / Stainless Steel
Diaphragm Material
2 - Nitrile
9 - Hytrel
4 - PTFE / Santoprene
B - Santoprene
Seat Material
1 - Aluminum
8 - Hard Stainless Steel
2 - 316 Stainless Steel
9 - Hytrel
4 - Kynar PVDF
E - Santoprene
5 - Carbon Steel
G - Nitrile
Fluid Section Service Kit Selection
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 of 8 666250-XXX-C (en) WARNING EXCESSIVE AIR PRESSURE. Can cause personal injury, pump damage or property damage.Do not exceed the maximum inlet air pressure as stated on the pump model plate.Be sure material hoses and other components are able to withstand fl uid pressures developed by this ...
666250-XXX-C (en) Page 3 of 8 y Viton®and Hytrel® are registered trademarks of the DuPont Company y Kynar® is a registered trademark of Arkema Inc. y Loctite® is a registered trademark of Henkel Loctite Corporation y y Santoprene® is a registered trademark of Monsanto Company, licensed to Advanced E...
Page 4 of 8 666250-XXX-C (en) PARTS LIST / 6662XX-XXX-C FLUID SECTION n 637432-XX Fluid section service kit includes: Balls (see Ball Option, refer to -XX in chart below), Diaphragms (see Diaphragm Option, refer to -XX in chart below) and items 2 and 19 (listed below) plus 93706-1 Key-Lube grease pa...
