Ingersoll Rand 6661HX-XXX-C - Manual
Ingersoll Rand 6661HX-XXX-C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OPERATING AND SAFETY PRECAUTIONS
- Page 3 – EXCESSIVE GAS PRESSURE. Can cause pump
- Page 4 – PARTS LIST
- Page 5 – Torque Sequence
- Page 6 – Indicates parts included in 637118-C gas section repair kit.; GAS MOTOR SECTION SERVICE; ent spacer legs away from blocking internal ports.; GAS MOTOR PARTS LIST; Item Description
- Page 8 – TROUBLE SHOOTING; Product discharged from exhaust outlet.; DIMENSIONAL DATA; Figure 5; DIMENSIONS
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 276-4658
y
FAX (800) 266-7016
© 2010
CCN 15276603
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
OPERATOR’S MANUAL
6661HX-XXX-C
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
RELEASED: 12-18-06
REVISED: 5-20-10
(REV. 04)
1" DIAPHRAGM PUMP
CSA CERTIFIED, 1:1 RATIO, METALLIC
INTENDED FOR USE WITH SWEET NATURAL GAS
SERVICE KITS
Refer to Model Description Chart to match the pump mate-
rial options.
637118-C for gas section repair (see page 6).
637119-C9-C for fl uid section repair (see page 4).
PUMP DATA
Models
. . . . . . . . . . . . . see Model Description Chart for “-XXX”
Pump Type
. . . . . . . . . Gas Operated Double Diaphragm
Material
. . . . . . . . . . . . see Model Description Chart
Weight
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 lbs (8.62 kgs)
Maximum Gas Inlet Pressure
. . . . . . . 120 p.s.i.g. (8.3 bar)
Maximum Material Inlet Pressure
. . . 10 p.s.i.g. (0.69 bar)
Maximum Outlet Pressure
. . . . . . . . . . 120 p.s.i.g. (8.3 bar)
Maximum Flow Rate
(fl ooded inlet)
. . . 35 g.p.m. (133 l.p.m.)
Displacement / Cycle @ 100 p.s.i.g.
. 0.156 gal. (0.59 lit.)
Maximum Particle Size
. . . . . . . . . . . . . 1/8” dia. (3.2 mm)
Maximum Temperature Limits
. . . 32° to 125° F (0° to 52° C)
Dimensional Data
. . . . . . . . . . . . . . . . . . . see page 8
Noise Level
@ 70 p.s.i., 60 c.p.m. . . . . . . 64.5 db(A)
c
c
The pump sound pressure levels published here have been updated to
an Equivalent Continuous Sound Level (L
Aeq
) to meet the intent of ANSI
S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.
Figure 1
MODEL DESCRIPTION CHART
6661 H 0 - 1 C 9 - C
Center Section Material, Fluid Connection
H - Aluminum, 1 - 11-1/2 N.P.T.F. - 1
Fluid Cap / Manifold Material, Hardware
0 - Aluminum, Carbon Steel
Fluid Section Service Kit Selection
EXAMPLE: Model #6661H0-1C9-C
Fluid Section Service Kit # 637119-C9-C
6661H0 - 1 X X - C
Ball
Diaphragm
637119 - X X - C
Seat Material
1 - Aluminum
Diaphragm Material
9 - Hytrel
Ball Material
C - Hytrel®
www.ingersollrandproducts.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 of 8 6661HX-XXX-C (en) WARNING EXCESSIVE GAS PRESSURE. Can cause per- sonal injury, pump damage or property damage.Do not exceed the maximum inlet gas pressure as stated on the pump model plate.Be sure material hoses and other components are able to withstand fl uid pressures developed by thi...
6661HX-XXX-C (en) Page 3 of 8 y Loctite® is a registered trademark of Henkel Loctite Corporation y 271™, 262™, 572™ and 577™ are trademarks of Henkel Loctite Corporation y y Hytrel® and Viton® are registered trademarks of the DuPont Company y ARO® is a registered trademark of Ingersoll-Rand Company ...
Page 4 of 8 6661HX-XXX-C (en) PARTS LIST / 6661HX-XXX-C FLUID SECTION 637119-C9-C fl uid section service kits include: Balls (item 22), diaphragms (item 7) plus items 2, 3, 19 and 93706-1 Key-Lube grease (page 6). MATERIAL CODE [A] = Aluminum [B] = Nitrile [C] = Carbon Steel [Co] = Copper[H] = Hyt...
