Ingersoll Rand 66615X-X-C - Manual
Ingersoll Rand 66615X-X-C – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OPERATING AND SAFETY PRECAUTIONS
- Page 3 – Reassemble in reverse order.
- Page 4 – ABRASION RESISTANT; Service Kit
- Page 5 – Torque Sequence
- Page 6 – AIR MOTOR SECTION SERVICE; Air Motor Section Service is continued from Fluid Section repair.; PILOT VALVE DISASSEMBLY; MAJOR VALVE DISASSEMBLY; spacer and insert etc.
- Page 7 – TORQUE REQUIREMENTS
- Page 8 – TROUBLE SHOOTING; Product discharged from exhaust outlet.; Check for diaphragm rupture.; Air bubbles in product discharge.; Check connections of suction plumbing.; Low output volume, erratic flow or no flow.; Check for plugged outlet hose.; DIMENSIONAL DATA; Figure 5
E
2010
CCN 81660219
(800) 276-4658
D
FAX (800) 266-7016
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET -- BRYAN, OHIO 43506
OPERATOR’S MANUAL
66615X-X-C
RELEASED:
5-31-88
REVISED:
12-1-10
(REV.
A
B
)
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
1-1/2” DIAPHRAGM PUMP
1:1 RATIO (METALLIC)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Refer to the Model Description Chart to match the pump material op-
tions.
637118-C for air section repair (see page 6).
637124-XX for fluid section repair (see page 4).
637155 Abrasion Resistant Conversion Kit is available for use in heavy
and abrasive material applications (see page 4).
PUMP DATA
Models
see “Model Description Chart” for “-XXX”
. . . . . . . . . . . .
Pump Type
Metallic Air Operated Double Diaphragm
. . . . . . . . .
Material
see “Model Description Chart”
. . . . . . . . . . . .
Weight
Aluminum
51.54 lbs (23.4 kgs)
. . . .
. . . . . . . . . . .
Cast Iron
79.54 lbs (36.1 kgs)
. . . . . . . . . . . .
Stainless Steel
84.54 lbs (38.3 kgs)
. . . . . . . .
[add 23 lbs (10.4 kgs) for cast iron air motor section]
Maximum Air Inlet Pressure
120 p.s.i. (8.3 bar)
. . . . . . . .
Maximum Material Inlet Pressure
10 p.s.i. (0.69 bar)
. . . .
Maximum Outlet Pressure
120 p.s.i. (8.3 bar)
. . . . . . . . .
Maximum Flow Rate
(flooded inlet)
90 g.p.m. (340.7 l.p.m.)
. . . .
Displacement / Cycle @ 100 p.s.i.g.
0.64 gal. (2.42 lit.)
. .
Maximum Particle Size
1/4” dia. (6.4 mm)
. . . . . . . . . . .
Maximum Temperature Limits (diaphragm / ball / seat material)
Acetal
10
_
to 180
_
F (-12
_
to 82
_
C)
. . . . . . . . . . . . . . . . .
E.P.R.
-60
_
to 280
_
F (-51
_
to 138
_
C)
. . . . . . . . . . . . . . . . .
Hytrel
R
-20
_
to 150
_
F (-29
_
to 66
_
C)
. . . . . . . . . . . . . . .
Kynar
R
PVDF
10
_
to 200
_
F (-12
_
to 93
_
C)
. . . . . . . . . . .
Neoprene
0
_
to 200
_
F (-18
_
to 93
_
C)
. . . . . . . . . . . . . .
Nitrile
10
_
to 180
_
F (-12
_
to 82
_
C)
. . . . . . . . . . . . . . . . .
Polypropylene
35
_
to 1
75
_
F (2
_
to
79
_
C)
. . . . . . . . . . .
Polyurethane
10
_
to 150
_
F (-12
_
to 66
_
C)
. . . . . . . . . . . .
PTFE
40
_
to 225
_
F (4
_
to 107
_
C)
. . . . . . . . . . . . . . . . .
Santoprene
R
-40
_
to 225
_
F (-40
_
to 107
_
C)
. . . . . . . . . . .
Viton
R
-40
_
to 350
_
F (-40
_
to 177
_
C)
. . . . . . . . . . . . . . . .
Dimensional Data
see page 8
. . . . . . . . . . . . . . .
Noise Level @
70 p.s.i. - 60 c.p.m.
77.7 dba(A)
. .
Tested with 93139 muffler assembly installed.
The pump sound pressure levels published here have been updated to an Equivalent
Continuous Sound Level (L
Aeq
) to meet the intent of ANSI S1.13-1971, CAGI-PNEU-
ROP S5.1 using four microphone locations.
NOTICE: All possible options are shown in the chart. However, certain
combinations may not be recommended, consult a representative or the
factory if you have questions concerning availability.
66615X-XXX-C
1-1/2” DIAPHRAGM PUMP
Figure 1
MODEL DESCRIPTION CHART
6661 X X - X X X - C
6661XX - X X X - C
637124 - X X
Diaphragm
Ball
FLUID SECTION SERVICE KIT SELECTION
EXAMPLE: MODEL # 666150-361-C
FLUID SECTION SERVICE KIT # 637124-61
Seat Material
1 - Aluminum
4 - Kynar PVDF
2 - 316 Stainless Steel
5 - Carbon Steel
3 - Polypropylene
8 - 440 Stainless Steel
Diaphragm Material
1 - Neoprene
5 - E.P.R.
2 - Nitrile
9 - Hytrel
3 - Viton
B - Santoprene
4 - PTFE / Santoprene
Center Body Material, Threads
5 - Aluminum, N.P.T.F.
7 - Aluminum, BSP
6 - Cast Iron, N.P.T.F.
8 - Cast Iron, BSP
Fluid Cap / Manifold Material, Hardware
(Steel Hardware)
(Stainless Steel Hardware)
0 - Aluminum
A - Aluminum
1 - Stainless Steel
B - Stainless Steel
2 - Cast Iron
C - Cast Iron
Ball Material
1 - Neoprene
6 - Acetal
2 - Nitrile
8 - Polyurethane
3 - Viton
A - Stainless Steel
4 - PTFE
C - Hytrel
5 - E.P.R.
E - Santoprene
www.ingersollrandproducts.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
66615X-X-C (en) Page 2 of 8 OPERATING AND SAFETY PRECAUTIONS READ, UNDERSTAND AND FOLLOW THIS INFORMATION TO AVOID INJURY AND PROPERTY DAMAGE. EXCESSIVE AIR PRESSURESTATIC SPARK HAZARDOUS MATERIALSHAZARDOUS PRESSURE WARNING EXCESSIVE AIR PRESSURE. Can cause person- al injury, pump damage or property...
Page 3 of 8 66615X-X-C (en) GENERAL DESCRIPTION The ARO diaphragm pump offers high volume delivery even at low airpressure and a broad range of material compatibility options available.Refer to the model and option chart. ARO pumps feature stall resistantdesign, modular air motor / fluid sections.Ai...
MATERIAL CODE [A] = Aluminum[B] = Nitrile[C] = Carbon Steel[CI] = Cast Iron[Co] = Copper[D] = Acetal[E] = E.P.R.[H] = Hytrel[K] = Kynar PVDF[N] = Neoprene[P] = Polypropylene[SH] = Hard Stainless Steel[Sp] = Santoprene[SS] = Stainless Steel[T] = PTFE[U] = Polyurethane[V] = Viton 637155 ABRASION RESIS...
