Ingersoll Rand 66605X-X - Manual
Ingersoll Rand 66605X-X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OPERATING AND SAFETY PRECAUTIONS
- Page 3 – WARNING; OPERATING INSTRUCTIONS
- Page 4 – SEAT OPTIONS
- Page 5 – Figure 2; INLET; TORQUE REQUIREMENTS; OUTLET
- Page 6 – Indicates parts included in 637141 Air Section Repair Kit.; AIR SECTION PARTS; GENERAL SERVICE NOTES:; FLUID SECTION DISASSEMBLY; FLUID SECTION REASSEMBLY
- Page 7 – Figure 3; AIR MOTOR SECTION SERVICE; Air Motor Section Service is continued from Fluid Section repair.; PILOT VALVE DISASSEMBLY; sist pressing stack into body.; MAJOR VALVE DISASSEMBLY; LIPS MUST; side of the (140) valve insert should be against the shiny face of
- Page 8 – TROUBLE SHOOTING; Product discharged from air exhaust.; DIMENSIONAL DATA; Material Outlet; Figure 4
CCN 99449712
OPERATOR’S MANUAL
66605X-X
RELEASED:
4-15-87
REVISED:
5-28-
10
(REV. AR)
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
1/2” DIAPHRAGM PUMP
1:1 RATIO (NON-METALLIC)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
Refer to Model Description Chart to match the pump material options.
637140-XX for fluid section repair (see page 4).
637141 for air section repair (see page 6).
PUMP DATA
Models
see Model Description Chart for “-XXX”.
. . . . . . . . . .
Pump Type
Non-Metallic Air Operated Double Diaphragm
. . . . . . .
Material
see Model Description Chart.
. . . . . . . . . .
Weight
Polypropylene
7.2 (3.3 kgs)
. . . .
. . . . . . . . .
Groundable Acetal
8.8 (4.0 kgs)
. . . . . .
Kynar
R
PVDF
9.5 (4.3 kgs)
. . . . . . . . .
Maximum Air Inlet Pressure
100 p.s.i.g. (6.9 bar)
. . . . . . . . .
Maximum Material Inlet Pressure
10 p.s.i.g. (0.69 bar)
. . . . .
Maximum Outlet Pressure
100 p.s.i.g. (6.9 bar)
. . . . . . . . . .
Air Consumption
1 c.f.m. / gallon (approx.)
. . . . . . . . . . . . . . . . .
Maximum Flow Rate
(Ball)
13 g.p.m. (49.2 l.p.m.)
. . . . . . .
(Duckbill)
10 g.p.m. (37.9 l.p.m.)
. . . .
Maximum Particle Size
(Ball)
3/32” dia. (2.4 mm)
. . . . . . .
(Duckbill)
Fibers
. . . .
Maximum Temperature Limits
E.P.R.
-60
_
to 280
_
F (-51
_
to 138
_
C)
. . . . . . . . . . . . . . . .
Groundable Acetal
10
_
to 180
_
F (-12
_
to 82
_
C)
. . . . . . .
Hytrel
R
-20
_
to 150
_
F (-29
_
to 66
_
C)
. . . . . . . . . . . . . .
Neoprene
0
_
to 200
_
F (-18
_
to 93
_
C)
. . . . . . . . . . . . .
Nitrile
10
_
to 180
_
F (-12
_
to 82
_
C)
. . . . . . . . . . . . . . . .
Polypropylene
35
_
to 175
_
F (2
_
to 79
_
C)
. . . . . . . . . .
Polyurethane
10
_
to 150
_
F (-12
_
to 66
_
C)
. . . . . . . . . . .
Kynar PVDF
10
_
to 200
_
F (-12
_
to 93
_
C)
. . . . . . . . . . .
Santoprene
R
-40
_
to 225
_
F (-40
_
to 107
_
C)
. . . . . . . . . .
PTFE
40
_
to 225
_
F (4
_
to 107
_
C)
. . . . . . . . . . . . . . . .
Viton
R
-40
_
to 350
_
F (-40
_
to 177
_
C)
. . . . . . . . . . . . . . .
Groundable
666056-X and 66605H-X models only
. . . . . . . . . . .
Dimensional Data
see page 8
. . . . . . . . . . . . . . . .
Noise Level
@ 70 p.s.i., 60 c.p.m.
71.1 db(A)
. . . . .
* The pump sound pressure levels published here have been updated to an Equivalent
Continuous Sound Level (L
Aeq
) to meet the intent of ANSI S1.13-1971, CAGI-PNEU-
ROP S5.1 using four microphone locations.
NOTICE: All possible options are shown in the chart however certain com-
binations may not be recommended, consult a representative or the fac-
tory if you have questions concerning availability
.
666053-XXX
666056-XXX
666057-XXX
66605J-XXX
66605H-XXX
66605K-XXX
Figure 1
MODEL DESCRIPTION CHART
66605 X - X X X - 04
66605X - X X X
637140 - X X
Diaphragm
Ball
FLUID SECTION SERVICE KIT SELECTION
EXAMPLE: MODEL # 666053-321
Fluid Section Service Kit # 637140-21
Seat Material
0 - (Duck Bill)
4 - Kynar PVDF
2 - Stainless Steel
6 - Acetal
3 - Polypropylene
Ball Material
( * ) Duckbill models
1 - Neoprene
8 - Polyurethane
2 - Nitrile
A - Stainless Steel
3 - Viton
C - Neoprene (*)
4 - PTFE
D - Nitrile (*)
5 - E.P.R.
E - Santoprene
Diaphragm Material
1 - Neoprene
5 - E.P.R.
2 - Nitrile
8 - Polyurethane
3 - Viton
9 - Hytrel
4 - PTFE / Santoprene
B - Santoprene
Fluid Caps & Manifold Material
3 - Piece Manifold
Single Piece Manifold
3 - Polypropylene
J - Polypropylene
6 - Groundable Acetal
H - Groundable Acetal
7 - Pure Kynar
K - Pure Kynar
Cone Check Flow
04 - Top Discharge
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276
FAX
(800) 892-6276
© 2010
www.ingersollrandproducts.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
66605X-X (en) Page 2 of 8 OPERATING AND SAFETY PRECAUTIONS READ, UNDERSTAND AND FOLLOW THIS INFORMATION TO AVOID INJURY AND PROPERTY DAMAGE. EXCESSIVE AIR PRESSURE STATIC SPARK HAZARDOUS MATERIALS HAZARDOUS PRESSURE WARNING EXCESSIVE AIR PRESSURE. Can cause person- al injury, pump damage or property...
Page 3 of 8 66605X-X (en) GENERAL DESCRIPTION The ARO diaphragm pump offers high volume delivery even at low air pressure and a broad range of material compatibility options available. Refer to the model and option chart. ARO pumps feature stall resistant design, modular air motor / fluid sections. ...
MATERIAL CODE [B] = Nitrile [D] = Acetal [E] = E.P.R. [F] = Fluoraz [GA] = Groundable Acetal [GFN] = Glass Filled Nylon [H] = Hytrel [N] = Neoprene [P] = Polypropylene [PK] = Pure Kynar [Sp] = Santoprene [SS] = Stainless Steel [T] = PTFE [U] = Polyurethane [V] = Viton H Not shown s Quantity = 22 666...
