Ingersoll Rand 666023 - Manual
Ingersoll Rand 666023 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – OPERATING AND SAFETY PRECAUTIONS
- Page 3 – WARNING; EXCESSIVE AIR PRESSURE. Can cause pump; – X X X; FLUID SECTION MATERIAL OPTIONS
- Page 4 – PART NOTES; DIAPHRAGM OPTIONS; SERVICE KITS; THESE ITEMS ARE INCLUDED IN THE KITS
- Page 5 – AIR VALVE; FIGURE 2; TORQUE REQUIREMENTS; NOTE: DO NOT OVERTIGHTEN FASTENERS; PARTS LIST; These parts are included in Air Valve Replacement Kit 637276.
- Page 6 – PUMP DISASSEMBLY AND REASSEMBLY; GENERAL PUMP REPAIR NOTES:
- Page 7 – TROUBLE SHOOTING; Air Motor stalls
- Page 8 – DIMENSIONAL DATA
OPERATOR’S MANUAL
66602X–X
RELEASED: 6–10–93
REVISED: 6–21–10
(REV.H) IPP/PSE
INCLUDING: OPERATION, INSTALLATION & MAINTENANCE
1/4” DIAPHRAGM PUMP
1:1 RATIO (NON–METALLIC)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
GENERAL DESCRIPTION
THIS MANUAL COVERS THE FOLLOWING MODELS
MODEL
TH'D
CHECK TYPE
WETTED MATERIAL
666023,J,H,L*-XXX
NPT
FLAT
POLYPROPYLENE
666026,M,N,P*-XXX
NPT
FLAT
GROUNDABLE ACETAL
* J,H,L,M,N,P Represent Inlet and Outlet Options, refer to page 3 for more information.
SERVICE KITS
Refer to Service Kit Chart on page 3 to match pump material with SerĆ
vice Kits offered. The ``X'' represents a variable digit of the Model No.
637273-XXX for Pump Rebuild. (Model digits 7,8,9)
637274-XX for Check Valve Replacement. (Model digits 7,9)
637275-XX for Diaphragm and Air Section repair. (Model digits 8,9)
637276 for Pre-assembled Replacement Air Valve Section. (Fig.2)
PUMP DATA
MODELS
- See Model Description Chart for ``-XXX'' on page 3.
PUMP TYPE
-Non-Metallic Air Operated Double Diaphragm
MATERIAL
- See Model Description Chart on page 3.
WEIGHT LBS.
- Polypropylene 3.6 (1.63 kgs)
- Groundable Acetal 4.1 (1.86 kgs)
MAXIMUM AIR INLET PRESSURE
- 100 p.s.i.g. (6.9 bar)
MINIMUM AIR INLET PRESSURE
- 20 p.s.i.g. (1.4 bar)
MAXIMUM OUTLET PRESSURE
- 100 p.s.i.g. (6.9 bar)
MAXIMUM FLOW RATE
- 5 g.p.m. (18.9 Liters)
MAXIMUM SUCTION LIFT
- 20 Ft. (Water)
MAXIMUM OUTPUT PER CYCLE
-.014 Gallons (53 cc's)
MAXIMUM PARTICLE SIZE
- 1/32" dia.
MAXIMUM TEMP. LIMITS
-
Polypropylene 35
_
F to 120
_
F
Groundable Acetal 10
_
F to 150
_
F
GROUNDABLE
- 666026-XXX Models Only
DIMENSIONAL DATA
- See page 8.
NOISE LEVEL
*- 59.8 db(A) @ 70 psi, 60 cycles per minute.
*
The pump sound pressure levels published here have been updated to an Equivalent Continuous Sound Level (L
Aeq
) to meet the intent of ANSI S1.13-1971, CAGI-PNEUROP S5.1 using four microphone locations.
The ARO Diaphragm Pump offers high volume delivery even at low air
pressures, easy self priming, the ability to pump various viscosity maĆ
terials and the ability to pass solids (as stated in the chart above). The
pump is designed to correspond to the needs of the user by offering a
variety of wetted parts configurations to handle almost any application.
Refer to the model and option chart on page 3.
Model 666026-XXX: The Acetal material used in this pump contains
Stainless Steel fibers, it's conductivity allows it to be connected to a
suitable ground, a ground screw is provided for this.
NOTICE: All possible options are shown in the chart on page 3 however
certain combinations may not be recommended, consult a representative
or the factory if you have questions concerning availability
.
666023-XXX
1/4'' DIAPHRAGM PUMP
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276 FAX(800) 892-6276
© 2010
www.ingersollrandproducts.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
OPERATING AND SAFETY PRECAUTIONS 66602X-X PAGE 2 OF 8 Z Read and heed all Warnings, Cautions, and Safety PrecauĆ tions before operating this pump. Z Use only genuine ARO replacement parts to assure compatĆ ible pressure rating and longest service life. WARNING EXCESSIVE AIR PRESSURE. Can cause pump ...
AIR AND LUBE REQUIREMENTS PAGE 3 OF 8 66602X-X MODEL DESCRIPTION CHART WARNING EXCESSIVE AIR PRESSURE. Can cause pump damage, personal injury or property damage. S A filter capable of filtering out particles larger than 50 microns should be used on the air supply. In most applications there is no lu...
MATERIAL CODE [A]=Aluminum [B]=Buna``N'' [D]=Acetal (Orange*) [F]=Fluoraz [G]=Groundable Acetal (Dk Gray) [K]=Kraton [N]=Neoprene [P]=Polypropylene (Lt Gray) [R]=Ryton [S]=Steel [SP]=Santoprene [SS]=Stainless Steel [U]=Polyurethane *Refers to wetted parts only ` Manifold Qty's will be either 1 or 2 ...
