Ingersoll Rand 651615-X - Manual

Ingersoll Rand 651615-X

Ingersoll Rand 651615-X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – Optional Items Available; Striking electrical
  • Page 3 – AIR CONTROLS; WARNING
  • Page 4 – PARTS LIST; ITEM DESCRIPTION; PTFE
  • Page 5 – BASIC SINGLE POST RAM/LIFT
  • Page 7 – FIGURE 5
  • Page 8 – FIGURE 6; Material-11 Gauge Steel; DIMENSIONAL DATA
Loading the manual

OPERATOR’S MANUAL

651615–X

RELEASED: 2–25–95

REVISED: 6–21–10

(REV. C)

INCLUDING: OPERATION, INSTALLATION & MAINTENANCE

SINGLE POST LIFT/RAM

For use with 5 Gallon Drums (T apered or Straight)

READ THIS MANUAL CAREFULLY BEFORE INSTALLING,

OPERATING OR SERVICING THIS EQUIPMENT.

THIS MANUAL COVERS THE FOLLOWING MODELS

MODEL

TYPICAL PUMP APPLICATION

651615

3'' & 4-1/4'' AIR MOTORS (TIE ROD PUMPS)

SERVICE KITS

Rebuild Kit for E512LM Valve - 116722

Repair Kit for 127112-000 Miniature Regulator - 104158

GENERAL DESCRIPTION

The ARO Model 651615-X Single Post Lift/Ram uses a 3-1/2'' air-

powered cylinder which is welded to a heavy gauge base base. It is norĆ

mally used to raise and lower a fluid handling pump and follower in and

out of of standard 5-gallon drum or when used as a ram it can force

high viscosity flowable material into the pump inlet.

When properly secured, this unit has the ability to raise a pump to clear

a standard 5-gallon drum. The operator is then able to easily remove

the pump from a pail.

ThisLift/Ram usesa hand lever 4-way control valve which controlsthe

air necessary to raise and lower the lift. This unit includes an auxiliary

manual air valve which is used to supply a controlled amount of air

pressure to the bottom of the follower plate. When the Control Valve is

in the ``UP'' position a small amount of air pressure applied under the

follower plate will help to raise the follower plate, pump and lift by reĆ

lieving the vacuum. See Page 3.

BASE DIMENSIONS: 20'' SQUARE (508 mm)

HEIGHT: LOWERED 36-3/4'' (.9m), RAISED 56-1/4'' (1.7 m)

651615

SINGLE POST LIFT

INGERSOLL RAND COMPANY LTD

209 NORTH MAIN STREET – BRYAN, OHIO 43506

(800) 495-0276

FAX

(800) 892-6276

© 2010

www.ingersollrandproducts.com

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Optional Items Available; Striking electrical

OPERATING AND SAFETY PRECAUTIONS MAJOR COMPONENTS FIGURE 1 Maximum Inlet Air Pressure 160 PSI (11 bar) Optional Items Available PORTABILITY KIT 66713 (See Page 8) 75366 SWIVEL DRUM STOP GAUGE MOUNTING BRACKET (See Page 8) UP NEUTRAL DOWN THUMB SCREW AIR HOSE (1/2 NPT(M) X 1/2 NPT(M) ) 622553-2 PUMP ...

Page 3 - AIR CONTROLS; WARNING

OPERATING INSTRUCTIONS PAGE 3 OF 8 651615-X LIFT/RAM INSTALLATION WARNING Failure to properly install the lift assembly can result in severe personal injury and property damage. Read the warning on page 2. 1. Establish the desired location for the lift/ram and pay special attenĆ tion to work area ab...

Page 4 - PARTS LIST; ITEM DESCRIPTION; PTFE

651615-X PAGE 4 OF 8 PARTS LIST Single Post Ram/Lift ITEM DESCRIPTION (SIZE IN INCHES) (QTY) PART NO. 1 Gauge (1) 29975 2 Tube 5" (1) 44632 j 3 Tube 4.75" (4) 44632 j 4 Screw (1/4-20) (3) Y99-45-C 5 Nut (1/4-20) (3) Y12-4-C 6 Washer (1/4") (3) Y13-4-C 7 Screw (5/8-11) (2) Y6-105-C 8 Lock...

Other Ingersoll Rand Models