Ingersoll Rand 650937-XX3 - Manual
Ingersoll Rand 650937-XX3 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
OPERATOR’S MANUAL
650937 -- X
RELEASED: 8--30--96
REVISED:
6--4--10
(REV.
02
)
TWO--BALL PUMP SERIES
2.062 SQ.” HYDRAULIC MOTOR
0.4:1 RATIO
6” STROKE
INCLUDE MANUALS: 6694X--X LOWER PUMP END (PN 97999--012) &
FORM 3638--2 GENERAL INFORMATION MANUAL (PN 97999--353)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING
650937-- X
400 SERIES STAINLESS STEEL
SERVICE KITS
•
Use only genuine ARO
R
replacement parts to assure compatible
pressure rating and longest service life.
•
637164 for repair of Hydraulic Motor section.
Service Note: The Hydraulic Motor Service/Parts Manual is not
shipped with the pump but it is included with each Service Kit. If this
Service/Parts Information is needed, request the Hydraulic Motor
Operator’s
Manual
from
ARO.
(Manual
61588--100,
PN 97999--063).
•
637211- XX3 for repair of Lower Pump section.
Refer to the chart on page 2 for description of --XXX options.
SPECIFICATIONS
Model Series
(Refer to option chart)
650937--XX3
. .
Type
Hydraulically Operated, Two--Ball
. . . . . . . . . . . . . . . . . . . .
Ratio
0.4:1
. . . . . . . . . . . . . . . . . . . .
Hydraulic Motor
61588--100
. . . . . . . . . . . .
Motor Repair Kit
637164
. . . . . . . . . .
Motor Size
2.062 sq.’’ (13.3 sq. cm)
. . . . . . . . . . . . . .
Stroke
6’’
. . . . . . . . . . . . . . . . . .
Hydraulic Inlet
3/8’’ -- 18 NPTF--1(f)
. . . . . . . . . . .
Hydraulic Return
1/2” -- 14 NPTF--1(f)
. . . . . . . . .
Lower Pump End Series
66941--XX3
. . . . .
Lower Pump Repair Kit
637211--XX3
. . . . .
Material Inlet
2” NPTF--1 (m)
. . . . . . . . . . . . .
Material Outlet
1--1/4’’ NPTF--1(f)
. . . . . . . . . . .
PERFORMANCE
Hydraulic Inlet Pressure Range
50 -- 1200 PSI (3.4 -- 83 bar)
Fluid Pressure Range
20 -- 515 PSI (1.4 -- 35.5 bar)
. . . . . . .
Max. Rec’d Cycles / Minute
50
. . .
Displacement In
3
Per Cycle
59.79
. . .
Volume / Cycle
33 oz. (979 ml)
. . . . . . . . . . . . .
Cycles Per Gallon
3.86
. . . . . . . . . .
Flow @ 50 Cycles / Minute
12.9 GPM (49.0 lpm)
. . . .
Noise Level
N/A
. . . . . . . . . . . . . . .
PUMP DATA
Hydraulic Motor
61588--100
(See Manual 61588--100)
FIGURE 1
Material Outlet
1--1/4’’ NPTF--1(f)
146
_
FROM HYDRAULIC INLET
Lower Pump
66941 -- XX3
(See Manual 6694X --X)
Hydraulic Inlet
3/8--18 NPTF--1(f)
(Not Shown)
Spacer Section
45- 9/16
(1157 mm)
14- 25/32
(375 mm)
29- 17/32
(750 mm)
Accessory Available: 61938--1 Wall Bracket and 65139 Floor Mounting Flange
.
CONNECTOR (See Figure 2)
MODEL 650937- XX3
CAP SCREW Y5--107--C (3)
WASHER Y14--625--C (3)
SPACER ROD 93347--1 (3)
Material Inlet
2’’ NPTF--1(male)
CAP SCREW 79186 (3)
MOUNTING PLATE 93353--1
IMPORTANT
This is one of the four documents which support the pump.
Replacement copies of these forms are available upon request.
=
650937--X MODEL OPERATOR’S MANUAL
-
GENERAL INFORMATION -- INDUSTRIAL PISTON PUMPS
-
6694X--X LOWER PUMP END OPERATOR’S MANUAL
-
61588--100 HYDRAULIC MOTOR OPERATOR’S MANUAL
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276
FAX
(800) 892-6276
© 2010
www.ingersollrandproducts.com
CCN 99711517
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
