Ingersoll Rand 650929- -X - Manual
Ingersoll Rand 650929- -X – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
OPERATOR’S MANUAL
650929 -- X
RELEASED: 8--30--96
REVISED:
6--4--10
(REV.
02
)
TWO--BALL PUMP SERIES
2.062 SQ.” HYDRAULIC MOTOR
1.7:1 RATIO
6” STROKE
INCLUDE MANUALS: 6689X--X LOWER PUMP END (PN 97999--082) &
FORM 3638--2 GENERAL INFORMATION MANUAL (PN 97999--353)
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING
650929-- X
CARBON STEEL
SERVICE KITS
•
Use only genuine ARO
R
replacement parts to assure compatible
pressure rating and longest service life.
•
637164 for repair of Hydraulic Motor section.
Service Note: The Hydraulic Motor Service/Parts Manual is not
shipped with the pump but it is included with each Service Kit. If this
Service/Parts Information is needed, request the Hydraulic Motor
Operator’s
Manual
from
ARO.
(Manual
61588--100,
PN 97999--063).
•
637180- X43 for repair of Lower Pump section.
Refer to the chart on page 2 for description of --XXX options.
SPECIFICATIONS
Model Series
(Refer to option chart)
650929--X43
. .
Type
Hydraulically Operated, Two--Ball
. . . . . . . . . . . . . . . . . . . .
Ratio
1.7:1
. . . . . . . . . . . . . . . . . . . .
Hydraulic Motor
61588--100
. . . . . . . . . . . .
Motor Repair Kit
637164
. . . . . . . . . .
Motor Size
2.062 sq.’’ (13.3 sq. cm)
. . . . . . . . . . . . . .
Stroke
6’’
. . . . . . . . . . . . . . . . . .
Hydraulic Inlet
3/8’’ -- 18 NPTF--1(f)
. . . . . . . . . . .
Hydraulic Return
1/2” -- 14 NPTF--1(f)
. . . . . . . . .
Lower Pump End Series
66890--X43
. . . . .
Lower Pump Repair Kit
637180--X43
. . . . .
Material Inlet
2’’ 11--1/2 PTF(m)
. . . . . . . . . . . . .
Material Outlet
1’’ 11--1/2 NPTF--1(f)
. . . . . . . . . . .
PERFORMANCE
Hydraulic Inlet Pressure Range
50 -- 1200 PSI (3.4 -- 83 bar)
Fluid Pressure Range
85 -- 2054 PSI (5.9 -- 142 bar)
. . . . . . .
Max. Rec’d Cycles / Minute
50
. . .
Displacement In
3
Per Cycle
14.531
. . .
Volume / Cycle
8.1 oz. (238 ml)
. . . . . . . . . . . . .
Cycles Per Gallon
15.9
. . . . . . . . . .
Flow @ 50 Cycles / Minute
3.1 GPM (11.9 lpm)
. . . .
Noise Level
N/A
. . . . . . . . . . . . . . .
PUMP DATA
Hydraulic Motor
61588--100
(See Manual 61588--100)
FIGURE 1
Material Outlet
1’’ NPTF--1(f)
90
_
FROM HYDRAULIC INLET
Lower Pump
66890 -- X43
(See Manual 6689X --X)
Hydraulic Inlet
3/8--18 NPTF--1(f)
(Not Shown)
Spacer Section
43- 1/2
(1105 mm)
12- 29/32
(328 mm)
28- 7/32
(717 mm)
Accessory Available: 61937--1 Wall Bracket and 65138 Floor Mounting Flange
.
CONNECTOR (See Figure 2)
MODEL 650929- X43
CAP SCREW 93342--1 (3)
WASHER Y14--625--C (3)
SPACER ROD 93345--1 (3)
Material Inlet
2’’ 11--1/2 PTF
SHORT MALE
IMPORTANT
This is one of the four documents which support the pump.
Replacement copies of these forms are available upon request.
=
650929--X MODEL OPERATOR’S MANUAL
-
GENERAL INFORMATION -- INDUSTRIAL PISTON PUMPS
-
6689X--X LOWER PUMP END OPERATOR’S MANUAL
-
61588--100 HYDRAULIC MOTOR OPERATOR’S MANUAL
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276
FAX
(800) 892-6276
© 2010
www.ingersollrandproducts.com
CCN 81378937
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
