Ingersoll Rand 650925-X43-B - Manual
Ingersoll Rand 650925-X43-B – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
OPERATOR’S MANUAL
650925 -- X--B
RELEASED:
8--1--97
REVISED:
6--4--10
(REV. B)
FOUR BALL PUMP SERIES
2.062 SQ.” HYDRAULIC MOTOR
0.3:1 RATIO
6” STROKE
INCLUDE MANUALS: 6695X--X LOWER PUMP END (PN 97999--002), 67147 HYDRAULIC MOTOR (PN 97999--705) &
FORM 3638--2 GENERAL INFORMATION MANUAL (PN 97999--353)
SPECIFICATIONS, SERVICE KITS, GENERAL INFORMATION, TROUBLESHOOTING
650925-- X--B
400 SERIES STAINLESS STEEL
READ THIS MANUAL CAREFULLY BEFORE INSTALLING,
OPERATING OR SERVICING THIS EQUIPMENT.
It is the responsibility of the employer to place this information in the hands of the operator. Keep for future reference.
SERVICE KITS
•
Use only genuine ARO
R
replacement parts to assure compatible
pressure rating and longest service life.
•
637315 for repair of Hydraulic Motor section.
•
637230- X43 for repair of Lower Pump section.
Refer to the chart on page 2 for description of --XXX options.
SPECIFICATIONS
Model Series
(Refer to option chart)
650925--X43--B
. .
Type
Hydraulically Operated, Four Ball
. . . . . . . . . . . . . . . . . . . .
Ratio
0.3:1
. . . . . . . . . . . . . . . . . . . .
Hydraulic Motor
67147
. . . . . . . . . . . .
Motor Repair Kit
637315
. . . . . . . . . .
Motor Size
2.062 sq.’’ (13.3 sq. cm)
. . . . . . . . . . . . . .
Stroke
6’’
. . . . . . . . . . . . . . . . . .
Hydraulic Inlet
3/8’’ -- 18 NPTF--1(f)
. . . . . . . . . . .
Hydraulic Return
1/2” -- 14 NPTF--1(f)
. . . . . . . . .
Lower Pump End Series
66951--X43
. . . . .
Lower Pump Repair Kit
637230--X43
. . . . .
Material Inlet
N/A
. . . . . . . . . . . . .
Material Outlet
3/4’’ NPTF--1 (f)
. . . . . . . . . . .
PERFORMANCE
Hydraulic Inlet Pressure Range
50 -- 1200 psi (3.4 -- 83 bar)
Fluid Pressure Range
15 -- 360 psi (1 -- 25 bar)
. . . . . . .
Required H- power @ 50 cpm
3.2 @ 1200 (83 bar)
.
Hydraulic flow req’d @ 50 cpm
8.7 gpm (32.9 lpm)
Max. Rec’d Cycles / Minute
50
. . .
Displacement In
3
Per Cycle
82.172
. . .
Volume / Cycle
45.5 oz. (1346 ml)
. . . . . . . . . . . . .
Cycles Per Gallon
2.8
. . . . . . . . . .
Flow @ 50 Cycles / Minute
17.8 gpm (67 lpm)
. . . .
Noise Level
N/A
. . . . . . . . . . . . . . .
Maximum Temperature Limit
130
_
F (54
_
C)
. .
PUMP DATA
Hydraulic Motor
67147
(See Manual 67147)
FIGURE 1
Material Outlet
3/4’’ NPTF--1(f)
191
_
FROM HYDRAULIC INLET
Lower Pump
66951-- X43
(See Manual 6695X --X)
Hydraulic Outlet
1/2--14 NPTF--2(f)
Spacer Section
41- 1/4”
(1048 mm)
26- 7/8
(683 mm)
14- 21/32
(372 mm)
Accessory Available: 93351--1 Wall Bracket and 66547 Floor Mounting Flange.
SPACER ROD 93580--1
CONNECTOR (See Figure 2)
MODEL 650925- X43- B
SCREW 93342--1 (3)
WASHER Y14--625--C (3)
SPACER ROD 93580--2 (2)
Hydraulic Inlet
3/8--18 NPTF--1(f)
(Not Shown)
IMPORTANT
This is one of the four documents which support the pump.
Replacement copies of these forms are available upon request.
=
650925--X--B MODEL OPERATOR’S MANUAL
-
GENERAL INFORMATION -- INDUSTRIAL PISTON PUMPS
-
6695X--X LOWER PUMP END OPERATOR’S MANUAL
-
67147 HYDRAULIC MOTOR OPERATOR’S MANUAL
INGERSOLL RAND COMPANY LTD
209 NORTH MAIN STREET – BRYAN, OHIO 43506
(800) 495-0276
FAX
(800) 892-6276
© 2010
www.ingersollrandproducts.com
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
